headers
ram | 1 Jan 2007 01:51
Picon

Re: How to connect two asterisk server



On 12/31/06, sunil <at> koltelecom.com <sunil <at> koltelecom.com> wrote:
Hi Carlos,

Im interested in knowing how we can connect 2 server using SIP. Well for me both are not asterisk servers, 1 is asterisk and 2nd is an SIP based Server. i need to take multiple calls from the SIP based server and terminate it using my asterisk peers based on my dialplan. I can use SIP only as my other server doesnot support IAX2.

How can i get that. Please let me know
 
 
 
Hi
what does it mean, sip based server ?
please do mention what is that  server, most of the servers are SIP based only.
 
 
ram

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
Permalink | Reply | 5 comments |
headers
ram | 1 Jan 2007 02:01
Picon

Re: Disconnect supervision in India?



On 12/30/06, Rajkumar S <rajkumars+asterisk <at> gmail.com> wrote:
On 12/29/06, Chris Earle <cearle <at> cbltech.ca> wrote:
> anyone know the status of disconnect supervision on POTS lines in India?
> Set up an asterisk box, TDM cards, in Mumbai, and doesn't seem to have
> disconnect supervision......

It does not work afaik, you may not get caller id also. I tested upto
1.4b3 and no luck.

raj
 
 
its all depends on the provider where you take from.
 
ram
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
Permalink | Reply | 0 comments |
headers
Martin Joseph | 1 Jan 2007 05:24

Re: WIFI SIP- The Best phone

On 2006-12-31 00:52:27 -0800, mitcheloc <mitcheloc <at> gmail.com> said:

> Those wifi phones are neat but I'd rather not carry around two
> devices, does anyone know of any good dual-mode GSM/SIP phones?
> 
> I'm using a T-Mobile MDA right now and it is way too slow.
> 
> Apparently the Nokia e61 has a built in SIP client, but there might be
> a new model around the corner (worth the wait?)....

Yes, wait.  I have the E60,which is nice,  but the SIP function is not 
ready for primetime.

Marty

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
Permalink | Reply | 0 comments |
headers
Troy - Purple Oranges | 1 Jan 2007 06:08
Favicon

Dual Ringing Tones

Hi all and Happy New Year.

I have a couple of interconnected asterisk boxes connected to several
providers.  With one provider in particular (ATP in Australia) there
are two ringing tones heard on outbound calls.  It is not the end of
the earth - I am not reselling our services yet - but it is strange
being that none of the other providers we are connected to exhibit
that behavior.

It does it with all the devices we are using (admittedly they are all
from the same company - sipura  erm Linksys)

If anybody has any ideas?

Cheers, Troy
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
Permalink | Reply | 2 comments |
headers
Leo Ann Boon | 1 Jan 2007 06:26

Re: Dual Ringing Tones

Troy - Purple Oranges wrote:
> Hi all and Happy New Year.
>
> I have a couple of interconnected asterisk boxes connected to several
> providers.  With one provider in particular (ATP in Australia) there
> are two ringing tones heard on outbound calls.  It is not the end of
> the earth - I am not reselling our services yet - but it is strange
> being that none of the other providers we are connected to exhibit
> that behavior.
I think your provider is providing early media. Check your sip messages, 
look for 183 with SDP in the response from the provider.

Leo
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
Permalink | Reply | 1 comment |
headers
Dante Dante | 1 Jan 2007 15:36

Thomson ST2020 and voicemail

Hi,
  I have ip phones Thomson ST2020 and have couple problems with them.
So I don't know how to configure voicemail button in phone to get voicemails
from Asterisk. In gui configuration window I need to enter URl of voicemail field, but
I don't know what is the syntax of this address. Maybe someone can help me to solve this problem...
Thanks and happy New Year



_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
Permalink | Reply | 0 comments |
headers
Zoilo Gomez | 1 Jan 2007 16:19
Picon
Picon
Favicon

Re: X100P "rings" randomly when "phone" line makes call

Yuan LIU wrote:

> Not sure if anyone experienced the same - or if anyone ever connected 
> a POTS phone to the "Phone" jack on an X100P card.
>
> The POTS phone rings normally when the FXO receives a call.  The POTS 
> phone can also make outgoing calls when FXO is not holding the line.  
> This is desired.  But if a call connected to the POTS phone lasts 
> longer than a couple of minutes, Asterisk would receive "ring" 
> conditions from X100P at seemingly random intervals, and kick off 
> incoming dialplan associated with the Zap channel.

I experienced a similar problem, when my FXO was not the only port 
terminating the PSTN-interface, but I had a normal phone set connected 
in parallel as well.

>
> I turned verbose to 6 and debug to 6, but all I could see was:
>    -- Starting simple switch on 'Zap/1-1'
>
> Any idea how I can find the cause?  Thank you.
>
> System is Asterisk 1.2.13 on Ubuntu 6.
>
> Yuan Liu
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
Permalink | Reply | 0 comments |
headers
John French | 1 Jan 2007 19:54

Help needed with Polycom dialplan pattern matching

I'm using Polycom Soundpoint phones and I want to use some extensions beginning with # for features setup.
I'm getting the fast busy "can't match it" signal. I want to match #50 for call forwarding, for instance,
and #505551212 to set the call forwarding number and turn it on. I have tftp set up and sip.cfg contains the following:

 
<dialplan dialplan.impossibleMatchHandling="0" dialplan.removeEndOfDial="1">
<digitmap
dialplan.digitmap="#xx.T|[2-9]11|0T|011xxx.T|[0-1][2-9]xxxxxxxxx|[2-9]xxxxxxxxx|[2-9]xxxT" dialplan.digitmap.timeOut="3"/>
<routing>
<server dialplan.routing.server.1.address="" dialplan.routing.server.1.port="5060"/>
<emergency dialplan.routing.emergency.1.value="911" dialplan.routing.emergency.1.server.1="1"/>
</routing>
</dialplan>

 
Thanks.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
Permalink | Reply | 1 comment |
headers
Doug Lytle | 1 Jan 2007 20:03

Re: Help needed with Polycom dialplan pattern matching

John French wrote:
> I'm using Polycom Soundpoint phones and I want to use some extensions beginning with # for features setup.
I'm getting the fast busy "can't match it" signal. I want to match #50 for call forwarding, for instance,
and #505551212 to set the call forwarding number and turn it on. I have tftp set up and sip.cfg contains the following:
>   

I'm not 100% sure, but I think the # is the call completion key for the 
Polycom phones.  I don't think you can use that key.

Doug

--

-- 
Ben Franklin quote:

"Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty
nor Safety."

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
Permalink | Reply | 0 comments |
headers
Bill Hackensack | 2 Jan 2007 00:08
Picon

Re: RE : Happy 2007!!!

On 12/31/06, Adam Jacob Muller <asterisk-users <at> adam.gs> wrote:
It's still 2006 here

-Adam
 
Well, Adam, I guess it is all about you.  What does the rest of the world look like as it revolves around you?

 
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
Permalink | Reply | 3 comments |

Gmane