headers
it | 1 Apr 2003 02:35

Re: Re: [Asterisk] IAXPHONE Win32 Alpha Released

Hi,Andre,
    I need at least the following files or classes:

TStringProperty
DbugIntf.pas

----- Original Message -----
From: "Andre Bierwirth" <asterisk <at> kmb.de>
To: <asterisk-users <at> lists.digium.com>
Sent: Friday, March 28, 2003 9:08 AM
Subject: Re: [Asterisk-Users] Re: [Asterisk] IAXPHONE Win32 Alpha Released

> Hi,
>
> the IAXPhone is very buggy. If i forget some Classes to Upload, tell me
what
> class you need ?
>
> Andre
>
> ----- Original Message -----
> From: "it" <info <at> itwav.com>
> To: <asterisk-users <at> lists.digium.com>
> Sent: Saturday, March 29, 2003 1:55 AM
> Subject: Re: [Asterisk-Users] Re: [Asterisk] IAXPHONE Win32 Alpha Released
>
>
> > Hi,every one!
> >     Where can I get the IAXPHONE for windows? The following code I
> download
(Continue reading)

Permalink | Reply | 4 comments |
headers
Eris Riswanto | 1 Apr 2003 02:12
Picon
Favicon

Serious problem with z-plex 10

Hello

I have serious problem with zhone z-plex 10
the device sometimes get red alarm on some channel
and then the device suddenly shutdown.
I try to unplugged the power chord and plug again,
but the device still didn't up. I have to wait
for long time to get this device up again.
How can i fix this problem, so i can get this device
immediately?

Eris Riswanto
Permalink | Reply | 7 comments |
headers
Steven Critchfield | 1 Apr 2003 02:21

Re: The best simple solution (newbee)

On Mon, 2003-03-31 at 13:38, sjaak nabuurs wrote:
> Hi
> 
> I'm very new to astrisk and I like to ask you as users with expirience what
> hardware to use and how to set this up.
> 
> What I like to create is the followe :
> 
> Use a normale phone dail a number >> astrisk >>(2Mbit) Internet(64Kb) >>
> astrisk >> Normal phone starts to ring and someone pick up the phone and
> talk and also phone reverse.
> 
> Ther's so lot of hardware x100p phonejack linejack Cisco and more and more
> i've not a good idea what's good for me.
> I've read so much that now my brain is ! <at> #$%^&*()_
> My main language isn't English so I understand everything for 90% and that's
> not enough to buy something like this.
> 
> I just like to setup a simple and (low budget) configuration.
> I know that 64K line isn't that much but is it acceptable ?????
> If it's equeal to msn or messenger it's okay for me.
> My telephone bill is rissing like the sun.
> My familie oversea doesn't have any clue about computers so i like to setup
> this in linux so I can manage it..

If you only plan on it being used for 1 line, I'd say get a pair of
TDM10B cards. Stuff them in low end celerons for asterisk to run on and
configure to talk to each other. If you gsm you should have no problem
with the 64k link. Or better yet, Maybe for the simplicity, you should
look into getting a snom phone for the remote side. Nothing better than
(Continue reading)

Permalink | Reply | 2 comments |
headers
Steven Critchfield | 1 Apr 2003 02:23

Re: Config??

On Mon, 2003-03-31 at 14:55, Allan Wang wrote:
> Steven,
> 
> 
> Could you please give me your config files for X100P
> and S100U? I just got mine, but I have difficulty to
> make it work.
> Thank you.

I only have T1 interfaces. 1 T400P at work, one T100P at home, and soon
to have a T100P for work too.

--

-- 
Steven Critchfield  <critch <at> basesys.com>
Permalink | Reply | 0 comments |
headers
Steven Critchfield | 1 Apr 2003 02:33

Re: Serious problem with z-plex 10

On Mon, 2003-03-31 at 18:12, Eris Riswanto wrote:
> Hello
> 
> I have serious problem with zhone z-plex 10
> the device sometimes get red alarm on some channel
> and then the device suddenly shutdown.
> I try to unplugged the power chord and plug again,
> but the device still didn't up. I have to wait
> for long time to get this device up again.
> How can i fix this problem, so i can get this device
> immediately?

Do not plug in ethernet cable at all, even if the interface is down.

The long time to come up is due to the software being verified, and then
booted. It is that way on many channel banks.

Also it could mean the zplex is not happy with the line coding it is
getting. It is a very sensitive device and flakes out if it doesn't get
good signal. 
--

-- 
Steven Critchfield  <critch <at> basesys.com>
Permalink | Reply | 6 comments |
headers
it | 1 Apr 2003 18:59

Re: Re: [Asterisk] IAXPHONE Win32 Alpha Released

Hi,which version of delphi are you using?  The dsgnintf.pas can't be find in
delphi 6.

Regards.

john

----- Original Message -----
From: "Andre Bierwirth" <asterisk <at> kmb.de>
To: <asterisk-users <at> lists.digium.com>
Sent: Monday, March 31, 2003 9:32 AM
Subject: Re: [Asterisk-Users] Re: [Asterisk] IAXPHONE Win32 Alpha Released

> TStringProperty is an internal Delphi class in
> Delphi\Source\Toolsapi\dsgnintf.pas and dbugintf.pas is a Part from
GExperts
> you can Download it from www.gexperts.org.
>
> Good Luck
>
> Andre
Permalink | Reply | 2 comments |
headers
Jayson Vantuyl | 1 Apr 2003 01:31
Gravatar

ADSI FDN and Security Codes

Okay,

Hypothetically I have a model number of a phone to order, the FDN of the
slot to program, and the security code to program it.

How long is a FDN or security code?

The ones that I have seem to be numbers larger than 32-bit (the code
appears to use four bytes, aka 32-bits).  Does that make sense?

Jayson
Permalink | Reply | 0 comments |
headers
Eris Riswanto | 1 Apr 2003 03:22
Picon
Favicon

Re: Serious problem with z-plex 10


|Do not plug in ethernet cable at all, even if the interface is down.
|
|The long time to come up is due to the software being verified, and then
|booted. It is that way on many channel banks.
|
|Also it could mean the zplex is not happy with the line coding it is
|getting. It is a very sensitive device and flakes out if it doesn't get
|good signal.
|--
|Steven Critchfield  <critch <at> basesys.com>
|

The ethernet port from the device doesn't even connected to network.
But i did  configure the ethernet interface. I think the device
mess up with the network configuration.
How can i get back the device to original configuration?
Anybody experienced with it, or any good idea to fix this problem?

Thanks in advance

Eris Riswanto
Permalink | Reply | 4 comments |
headers
Martin Pycko | 1 Apr 2003 04:11
Favicon

Re: Config??

Read www.digium.com at Documentation->FAQ

Martin

On Mon, 31 Mar 2003, Allan Wang wrote:

> Steven,
>
>
> Could you please give me your config files for X100P
> and S100U? I just got mine, but I have difficulty to
> make it work.
> Thank you.
>
>
>
>
>   Allan
>
>
>
> --- Steven Critchfield <critch <at> basesys.com> wrote:
> > On Fri, 2003-03-21 at 10:07, WipeOut . wrote:
> > > I have got my box up and running with a X100P and
> > a S100U
> > > but I found a bit of a "funny"..
> > >
> > > I took the default config files and commented
> > every line
> > > and then I started creating my own config using
(Continue reading)

Permalink | Reply | 1 comment |
headers
TC | 1 Apr 2003 05:26
Picon
Favicon

Re: Serious problem with z-plex 10

If you can still login you can do
set2default
That will set it to factory defaults all your config info is now gone you
must re-provision
with all the slot nonsense
(the default user name is “admin,” the default password is “zhone”):
I have an old working config for a 24fxs zhone in format used by its tftp
loader
use at your own risk..

IF you't dont have a tftp server then grab one from here
http://www.jbmelectronics.com/tftp.htm
my old notes says...
after factory default config ..enter following cmds

#load new IP definition & enter ip/net mask
new ip-interface-record 1/1/1/0/ip
#save the ip config
update ip-interface-record 1/1/1/0/ip
#check it is correct
get ip-interface-record 1/1/1/0/ip
#connect to yout tftp server & load config from txt file
restore network <IP of your tftp server> zplexfxs.txt

I might have missed some thing that is obvious, :)

-----Original Message-----
From: Eris Riswanto <rizwanto <at> sdf.lonestar.org>
To: asterisk-users <at> lists.digium.com <asterisk-users <at> lists.digium.com>
Date: March 31, 2003 5:30 PM
(Continue reading)

Permalink | Reply | 1 comment |

Gmane