Endian Firewall Support Mailinglist ()

Emiliano Tortorella | 2 Aug 2012 00:21

EFW 2.5.1 on a IBM x3100 M4

Hi all,

I've installed an EFW 2.5.1 on a IBM x3100 M4, so far it was everything 
ok until I tried to add a PCI Express network card. It seems that EFW 
doesn't recognizes the PCI-E bus so it doesn't recognizes the NIC.

The lspci command gives me this output:

00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port 
(rev 09)
00:01.1 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port 
(rev 09)
00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host 
Controller #2 (rev 05)
00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 
1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 
2 (rev b5)
00:1c.2 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 
3 (rev b5)
00:1c.3 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 
4 (rev b5)
00:1c.4 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 
5 (rev b5)
00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host 
Controller #1 (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Cougar Point LPC Controller (rev 05)
00:1f.2 IDE interface: Intel Corporation Cougar Point 4 port SATA IDE

(Continue reading)

headers

Giuseppe Perna | 2 Aug 2012 09:12

Re: EFW 2.5.1 on a IBM x3100 M4

Hello Emiliano,
I suggest you only use intel or 3com network cards.
the last time I used old or not supported cards, the network did set
to 10 half duplex.

hello

ciao Emiliano,
ti consiglio di utilizzare solo schede di rete intel oppure 3com .
l'ultima volta che ho utilizzato schede vecchie o non supportate la
rete si settava a 10 half duplex.

ciao

2012/8/2 Emiliano Tortorella <etortorella@...>:
> Hi all,
>
> I've installed an EFW 2.5.1 on a IBM x3100 M4, so far it was everything
> ok until I tried to add a PCI Express network card. It seems that EFW
> doesn't recognizes the PCI-E bus so it doesn't recognizes the NIC.
>
> The lspci command gives me this output:
>
> 00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09)
> 00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port
> (rev 09)
> 00:01.1 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port
> (rev 09)
> 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host
> Controller #2 (rev 05)

(Continue reading)

headers

Emiliano Tortorella | 6 Aug 2012 16:45

Re: EFW 2.5.1 on a IBM x3100 M4

Thanks for your answer Giuseppe,

The network card it's fully supported by efw 2.5.1, in fact I have another efw with this network card working very well.

Like I've say before the issue is with the PCI-E bus, maybe someone had the same issue and solved loading the required module or something like that.

Regards.-

Emiliano Tortorella | ipWorkers Servicio Técnico

www.ipworkers.com | Río Negro 1380 Of.1206 | Montevideo | Uruguay
Tel: (+598) 2902-9843 | Cel: (+598) 91493769

El 02/08/12 04:12, Giuseppe Perna escribió:

Hello Emiliano, I suggest you only use intel or 3com network cards. the last time I used old or not supported cards, the network did set to 10 half duplex. hello ciao Emiliano, ti consiglio di utilizzare solo schede di rete intel oppure 3com . l'ultima volta che ho utilizzato schede vecchie o non supportate la rete si settava a 10 half duplex. ciao 2012/8/2 Emiliano Tortorella <etortorella-+7ibkB4fkw2akBO8gow8eQ@public.gmane.org>:
Hi all, I've installed an EFW 2.5.1 on a IBM x3100 M4, so far it was everything ok until I tried to add a PCI Express network card. It seems that EFW doesn't recognizes the PCI-E bus so it doesn't recognizes the NIC. The lspci command gives me this output: 00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) 00:01.1 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) 00:1c.2 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 3 (rev b5) 00:1c.3 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 4 (rev b5) 00:1c.4 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 5 (rev b5) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Cougar Point LPC Controller (rev 05) 00:1f.2 IDE interface: Intel Corporation Cougar Point 4 port SATA IDE Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) 00:1f.5 IDE interface: Intel Corporation Cougar Point 2 port SATA IDE Controller (rev 05) 01:00.0 PCI bridge: Renesas Technology Corp. Unknown device 0013 02:00.0 PCI bridge: Renesas Technology Corp. Unknown device 0013 02:01.0 PCI bridge: Renesas Technology Corp. Unknown device 0013 03:00.0 PCI bridge: Renesas Technology Corp. Unknown device 0012 04:00.0 VGA compatible controller: Matrox Graphics, Inc. Unknown device 0534 06:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection 0b:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection emiliano <at> emiliano-HP-dm1:~$ cat /media/Kingston/lspci.txt 00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) 00:01.1 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) 00:1c.2 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 3 (rev b5) 00:1c.3 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 4 (rev b5) 00:1c.4 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 5 (rev b5) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Cougar Point LPC Controller (rev 05) 00:1f.2 IDE interface: Intel Corporation Cougar Point 4 port SATA IDE Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) 00:1f.5 IDE interface: Intel Corporation Cougar Point 2 port SATA IDE Controller (rev 05) 01:00.0 PCI bridge: Renesas Technology Corp. Unknown device 0013 02:00.0 PCI bridge: Renesas Technology Corp. Unknown device 0013 02:01.0 PCI bridge: Renesas Technology Corp. Unknown device 0013 03:00.0 PCI bridge: Renesas Technology Corp. Unknown device 0012 04:00.0 VGA compatible controller: Matrox Graphics, Inc. Unknown device 0534 06:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection 0b:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection I suppose that this is the problem: 01:00.0 PCI bridge: Renesas Technology Corp. Unknown device 0013 02:00.0 PCI bridge: Renesas Technology Corp. Unknown device 0013 02:01.0 PCI bridge: Renesas Technology Corp. Unknown device 0013 03:00.0 PCI bridge: Renesas Technology Corp. Unknown device 0012 But i don't know how to resolve it. Have someone had a similar issue?, how can I resolve it? I'll appreciate your help. Regards, Emiliano ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Efw-user mailing list Efw-user-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org https://lists.sourceforge.net/lists/listinfo/efw-user
------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Efw-user mailing list Efw-user-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org https://lists.sourceforge.net/lists/listinfo/efw-user

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/

_______________________________________________
Efw-user mailing list
Efw-user@...
https://lists.sourceforge.net/lists/listinfo/efw-user

headers

Lorenzo Milesi | 6 Aug 2012 17:41

Unstable VPN

Hi.
I just replaced a customer's ZyWall with EFW 2.5.1, I'm using 2.4 myself.
I had an IPSec vpn configured with Zywall, working fine.
Now that I moved to EFW on the other side as well I thought things would go better, instead I'm having a lot of troubles.
I.e. when I try to downoad "lots" of data, like opening a remote file with vi, the connection drops, screen
freezes and won't go further, while if I open a new connection everything is fast and working!

How's possible?
On both sides I used the standard IPsec settings.

Thanks
-- 
Lorenzo Milesi - lorenzo.milesi@...

YetOpen S.r.l. - http://www.yetopen.it/
Via Carlo Torri Tarelli 19 - 23900 Lecco - ITALY -
Tel 0341 220 205 - Fax 178 6070 222

GPG/PGP Key-Id: 0xE704E230 - http://keyserver.linux.it

-------- D.Lgs. 196/2003 --------

Si avverte che tutte le informazioni contenute in questo messaggio sono
riservate ed a uso esclusivo del destinatario. Nel caso in cui questo
messaggio Le fosse pervenuto per errore, La invitiamo ad eliminarlo
senza copiarlo, a non inoltrarlo a terzi e ad avvertirci non appena
possibile.
Grazie.

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/

headers

Frank Harbey Sanabria Florez | 19 Aug 2012 01:10

Squid

Hi everybody, i have a question, I can upgrade squid to latest version?

Thank's for the answer

FRANK HARBEY SANABRIA FLOREZ

Tecnologo en Telecomunicaciones y Sistemas

Bogota - Colombia

(57) 3133252579

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/

_______________________________________________
Efw-user mailing list
Efw-user@...
https://lists.sourceforge.net/lists/listinfo/efw-user

headers

Andres Gonzalez | 24 Aug 2012 07:00

[EFW 2.5.1] Routes

Hi, I'm trying to setup some routes and since EFW 2.2 the GUI seems to be not working.

Up to EFW I could add route on a script located at /etc/init.d/rc.local but on 2.5.1 seems that it doesn't exists anymore.

Any idea if there is a workaround for this routes issue ?

Regards.-

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/

_______________________________________________
Efw-user mailing list
Efw-user@...
https://lists.sourceforge.net/lists/listinfo/efw-user

headers

Johnathan Revell | 24 Aug 2012 08:40

Re: [EFW 2.5.1] Routes


I've had similar issues.

I've worked around this by creating manually using the route command.

Regards

On 24 Aug 2012, at 06:00, "Andres Gonzalez" <tuchoz@...> wrote:

> Hi, I'm trying to setup some routes and since EFW 2.2 the GUI seems to be not working.
> Up to EFW I could add route on a script located at /etc/init.d/rc.local but on 2.5.1 seems that it doesn't
exists anymore.
>
> Any idea if there is a workaround for this routes issue ?
>
> Regards.-
>
> ------------------------------------------------------------------------------
> Live Security Virtual Conference
> Exclusive live event will cover all the ways today's security and
> threat landscape has changed and how IT managers can respond. Discussions
> will include endpoint security, mobile security and the latest in malware
> threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
>

Johnathan Revell
IT Director

Tel: 01302 304000
Fax: 01302 322573
www.CrashRepairParts.com
Registered in
England and Wales at Cross Bank, Carr Hill,
Balby, Doncaster DN4 8BE
Company Reg. No 04290042 VAT No. GB590774016

_______________________________________________
> Efw-user mailing list
> Efw-user@...
> https://lists.sourceforge.net/lists/listinfo/efw-user

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/

headers

Pedro M. S. Oliveira | 24 Aug 2012 09:46

Re: [EFW 2.5.1] Routes

Hello, I'm using the Web interface to setup routes without trouble in every version since 2.1 until 2.5. Both in community as in paid versions. I also have more than 50 endians running and almost every one has routing to other gws apart from the default setup.
What rule do you wish to setup?
Cheers,
Pedro

On Aug 24, 2012 6:02 AM, "Andres Gonzalez" <tuchoz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:

Hi, I'm trying to setup some routes and since EFW 2.2 the GUI seems to be not working.
Up to EFW I could add route on a script located at /etc/init.d/rc.local but on 2.5.1 seems that it doesn't exists anymore.

Any idea if there is a workaround for this routes issue ?

Regards.-

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Efw-user mailing list
Efw-user-5NWGOfrQmneRv+LV9MX5ug@public.gmane.orge.net
https://lists.sourceforge.net/lists/listinfo/efw-user

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/

_______________________________________________
Efw-user mailing list
Efw-user@...
https://lists.sourceforge.net/lists/listinfo/efw-user

headers

Andres Gonzalez | 24 Aug 2012 15:07

Re: [EFW 2.5.1] Routes

On Fri, Aug 24, 2012 at 3:40 AM, Johnathan Revell <johnathan-Mz9GGyS9ConmQsXbKtj5Y1aTQe2KTcn/@public.gmane.org> wrote:

I've had similar issues.

I've worked around this by creating manually using the route command.

Regards

Hi! Where did you create the file to be persistent ?

Thanks.

Regards.-

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/

_______________________________________________
Efw-user mailing list
Efw-user@...
https://lists.sourceforge.net/lists/listinfo/efw-user

headers

Andres Gonzalez | 24 Aug 2012 15:13

Re: [EFW 2.5.1] Routes

On Fri, Aug 24, 2012 at 4:46 AM, Pedro M. S. Oliveira <pmsoliveira <at> gmail.com> wrote:

Hello, I'm using the Web interface to setup routes without trouble in every version since 2.1 until 2.5. Both in community as in paid versions. I also have more than 50 endians running and almost every one has routing to other gws apart from the default setup.
What rule do you wish to setup?
Cheers,
Pedro

Hello!

I configured statics routes via: Network -> Routing

I tried both, static and policy routing with definitions like:

Source 192.168.1.0/24

Destination: 10.0.1.0/24

Gateway: 192.168.1.253

Or:

Source: ANY

Destination: 10.0.1.0/24

Gateway: 192.168.1.253

And:

Source: GREEN / LOCAL

Destination: 10.0.1.0/24

Gateway: 192.168.1.253

Regards.-

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/

_______________________________________________
Efw-user mailing list
Efw-user@...
https://lists.sourceforge.net/lists/listinfo/efw-user

2	May 2013
2	April 2013
20	March 2013
10	February 2013
1	January 2013
21	December 2012
56	November 2012
2	October 2012
15	September 2012
25	August 2012
5	July 2012
7	June 2012
7	May 2012
9	April 2012
1	March 2012
26	February 2012
3	January 2012
1	December 2011
9	November 2011
41	October 2011
48	September 2011
2	August 2011
10	July 2011
9	June 2011
6	May 2011
9	April 2011
18	March 2011
40	February 2011
5	January 2011
13	December 2010
58	November 2010
34	October 2010
39	September 2010
30	August 2010
18	July 2010
50	June 2010
70	May 2010
69	April 2010
46	March 2010
40	February 2010
46	January 2010
56	December 2009
86	November 2009
61	October 2009
59	September 2009
18	August 2009
40	July 2009
76	June 2009
94	May 2009
70	April 2009
115	March 2009
85	February 2009
61	January 2009
73	December 2008
152	November 2008
270	October 2008
96	September 2008
121	August 2008
88	July 2008
122	June 2008
147	May 2008
175	April 2008
44	March 2008
74	February 2008
144	January 2008
86	December 2007
149	November 2007
223	October 2007
143	September 2007
134	August 2007
96	July 2007
131	June 2007
118	May 2007
105	April 2007
107	March 2007
101	February 2007
206	January 2007
141	December 2006
159	November 2006
172	October 2006
168	September 2006
95	August 2006
46	July 2006

Mon	Tue	Wed	Thu	Fri	Sat	Sun

		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	31