Re: Unable to keep push options and static routes after restarting

on 3-31-2008 2:47 PM codespinner spake the following:
> Thanks, Bucky.
> 
> Can you give me some help with the second question regarding push options
> for OpenVPN?
> 
I think push option go into the servers config file, but you might have to 
manually add them like ;
push "route 192.168.0.0 255.255.255.0"

--

-- 
MailScanner is like deodorant...
You hope everybody uses it, and
you notice quickly if they don't!!!!

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace

_______________________________________________
Efw-user mailing list
Efw-user@...
https://lists.sourceforge.net/lists/listinfo/efw-user

Re: Ver 2.2 Beta 3 Port Forwarding

You are right.. Beta 3 has problems.. It appears to relate to the port
forwarding problem. Ipcop has a button to eliminate reponse to pinging, I
suspect this setting is on.I cant use bittorrent, in fact nobody can ping me
because this firewall doesnt respond although I see the specific pingers
(friends of mine ) in the hit list..
VPN cant be set up because nobody can get in. Pidgeon doesnt work either..
which probably is the same reason..
so now that I am back on IPCOP and everything appears to be back to normal,
I will wait for this design to mature.. Actually Endian holds great promises
and I really like what they are trying to do..
Fixing the install setup is great.. putting up OpenVPN is great also since
we wont have to hand install zerina as they suggest for smoothwall and
IPcop.
pete

Louwrens van Deventer aka Endymion wrote:
> 
> Hi,
> 
> 
> 
> I imported a backup from Beta 2 after installing Beta 3.
> 
> 
> 
> I had port forwarding setup on TCP and UDP ports 4662 & 4672 to a machine
> on
> the green interface with a static IP. Ports doesn't get forwarded to
> target

Speaking of load-balancing

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace

_______________________________________________
Efw-user mailing list
Efw-user@...
https://lists.sourceforge.net/lists/listinfo/efw-user

Re: Unable to keep push options and static routes after restarting

Thanks, Scott.

What I did was add options to the user.tmpl file located /var/openvpn/. 
However, I noticed that I could only add one domain option.  Do you know if
there is a way to add multiple domain options?

Scott Silva wrote:
> 
> on 3-31-2008 2:47 PM codespinner spake the following:
>> Thanks, Bucky.
>> 
>> Can you give me some help with the second question regarding push options
>> for OpenVPN?
>> 
> I think push option go into the servers config file, but you might have to 
> manually add them like ;
> push "route 192.168.0.0 255.255.255.0"
> 
> 
> -- 
> MailScanner is like deodorant...
> You hope everybody uses it, and
> you notice quickly if they don't!!!!
> 
> 
>  
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
> _______________________________________________
> Efw-user mailing list
> Efw-user@...
> https://lists.sourceforge.net/lists/listinfo/efw-user
> 
> 

--

-- 
View this message in context: http://www.nabble.com/Unable-to-keep-push-options-and-static-routes-after-restarting-tp16316239p16428312.html
Sent from the efw-user mailing list archive at Nabble.com.

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace

Re: Unable to keep push options and static routes after restarting

on 4-1-2008 3:36 PM codespinner spake the following:
> Thanks, Scott.
> 
> What I did was add options to the user.tmpl file located /var/openvpn/. 
> However, I noticed that I could only add one domain option.  Do you know if
> there is a way to add multiple domain options?
> 
Efw doesn't work for me right now, so I am waiting for 2.2 to go stable before 
I test again. Sorry...

--

-- 
MailScanner is like deodorant...
You hope everybody uses it, and
you notice quickly if they don't!!!!

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace

_______________________________________________
Efw-user mailing list
Efw-user@...
https://lists.sourceforge.net/lists/listinfo/efw-user

Re: Unable to keep push options and static routes after restarting

No worries.  Thanks for your help so far.

Scott Silva wrote:
> 
> on 4-1-2008 3:36 PM codespinner spake the following:
>> Thanks, Scott.
>> 
>> What I did was add options to the user.tmpl file located /var/openvpn/. 
>> However, I noticed that I could only add one domain option.  Do you know
>> if
>> there is a way to add multiple domain options?
>> 
> Efw doesn't work for me right now, so I am waiting for 2.2 to go stable
> before 
> I test again. Sorry...
> 
> -- 
> MailScanner is like deodorant...
> You hope everybody uses it, and
> you notice quickly if they don't!!!!
> 
> 
>  
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
> _______________________________________________
> Efw-user mailing list
> Efw-user@...
> https://lists.sourceforge.net/lists/listinfo/efw-user
> 
> 

--

-- 
View this message in context: http://www.nabble.com/Unable-to-keep-push-options-and-static-routes-after-restarting-tp16316239p16465557.html
Sent from the efw-user mailing list archive at Nabble.com.

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace

Change 100mbts to 10mbts on my red NIC

Hello,

I need change my NIC velocity of 100mbts to 10mbts Full Duplex on my
RED network, because the problems with Cisco Router.

How to make?

Thanks,

Julio

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace

Re: Change 100mbts to 10mbts on my red NIC

Hello,

I need change my NIC velocity of 100mbts to 10mbts Full Duplex on my
RED network, because the problems with Cisco Router.

How to make?

Thanks,

Julio

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace

Re: Change 100mbts to 10mbts on my red NIC

I don't know how to do this offhand in nix configs, but it
is possible to change. Some routers have the option to set
the port speed, so you could do it there instead. 
Since the port speed is matched automatically these days,
you could buy a new/used 10baseT hub and place it between
the two devices - that would force 10mbit. Many ppl have old
10baseT hubs laying around.

-----Original Message-----
From: efw-user-bounces@...
[mailto:efw-user-bounces@...] On Behalf Of
Julio Cesar
Sent: Thursday, April 03, 2008 9:20 AM
To: efw-user@...
Subject: Re: [Efw-user] Change 100mbts to 10mbts on my red
NIC

Hello,

I need change my NIC velocity of 100mbts to 10mbts Full
Duplex on my
RED network, because the problems with Cisco Router.

How to make?

Thanks,

Julio

------------------------------------------------------------
-------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf
.net/marketplace
_______________________________________________
Efw-user mailing list
Efw-user@...
https://lists.sourceforge.net/lists/listinfo/efw-user

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace

Re: Change 100mbts to 10mbts on my red NIC

Thanks,

I find my solution.

I will change de rc.local and add the string:
ethtool -s eth1 speed 10 duplex full autoneg off

Bye,

Julio

2008/4/3, compdoc <compdoc@...>:
> I don't know how to do this offhand in nix configs, but it
> is possible to change. Some routers have the option to set
> the port speed, so you could do it there instead.
> Since the port speed is matched automatically these days,
> you could buy a new/used 10baseT hub and place it between
> the two devices - that would force 10mbit. Many ppl have old
> 10baseT hubs laying around.
>
>
>
>
> -----Original Message-----
> From: efw-user-bounces@...
> [mailto:efw-user-bounces@...] On Behalf Of
> Julio Cesar
> Sent: Thursday, April 03, 2008 9:20 AM
> To: efw-user@...
> Subject: Re: [Efw-user] Change 100mbts to 10mbts on my red
> NIC
>
> Hello,
>
> I need change my NIC velocity of 100mbts to 10mbts Full
> Duplex on my
> RED network, because the problems with Cisco Router.
>
> How to make?
>
> Thanks,
>
> Julio
>
> ------------------------------------------------------------
> -------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf
> .net/marketplace
> _______________________________________________
> Efw-user mailing list
> Efw-user@...
> https://lists.sourceforge.net/lists/listinfo/efw-user
>
>
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
> _______________________________________________
> Efw-user mailing list
> Efw-user@...
> https://lists.sourceforge.net/lists/listinfo/efw-user
>

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace