Spam Training

I believe I have correctly configured efw and my mailserver to receive and
process emails sent to spam@... and
ham@... but how do I know if
it's actually being processed?  I don't receive any sort of acknowledgement
(success or fail) when I send a spam to the addresses.  Is there a log for,
I assume, salearn?

Also, is there a log for the spamfilter training service?  I think I have
set it up correctly - the connection test passes but it doesn't seem to
delete the spam from the specified folder after training.

Thanks

Jerry

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/

Re: Spam Training

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/

_______________________________________________
Efw-user mailing list
Efw-user@...
https://lists.sourceforge.net/lists/listinfo/efw-user

Re: Media Center guide data

If I disable proxy I can download guide data but this kind of defeats the
purpose of having a firewall. Surely I'm not the only one that's having this
problem. How are others handling it??

Mike

Diederik Lascaris wrote:
> 
> Hi Mike,
> I also have a MMC behind my Endian firewall, but my guide is getting
> updated just fine. But then again I block very little from Lan to Wan, or
> run a http proxy on my green network where my MMC is connected on. 
> Perhaps the best way of dealing with this is to eliminate the things that
> could be blocking the guide update. Try disabling the proxy, then open up
> all traffic from lan to the net. 
> 
> Good luck,
> Diederik.
> 
> -----Oorspronkelijk bericht-----
> Van: efw-user-bounces@...
> [mailto:efw-user-bounces@...] Namens Dilligaf1
> Verzonden: dinsdag 24 juli 2007 23:15
> Aan: efw-user@...
> Onderwerp: [Efw-user] Media Center guide data
> 
> 
> I am unable to download tv guide data for Microsoft Media Center through
> the
> firewall, does anybody have any ideas? I found a page talking about HTTP
> byte range but don't know enough to enable it. This is a link to the page 
> http://blogs.msdn.com/astebner/archive/2005/11/23/496503.aspx LINK .
> Thanks
> for any help
> 
> Mike
> 
> -- 
> View this message in context:
> http://www.nabble.com/Media-Center-guide-data-tf4138687.html#a11771994
> Sent from the efw-user mailing list archive at Nabble.com.
> 
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc.
> Still grepping through log files to find problems?  Stop.
> Now Search log events and configuration files using AJAX and a browser.
> Download your FREE copy of Splunk now >>  http://get.splunk.com/
> _______________________________________________
> Efw-user mailing list
> Efw-user@...
> https://lists.sourceforge.net/lists/listinfo/efw-user
> 
> No virus found in this incoming message.
> Checked by AVG Free Edition. 
> Version: 7.5.476 / Virus Database: 269.10.14/912 - Release Date: 22-7-2007
> 19:02
>  
> 
> No virus found in this outgoing message.
> Checked by AVG Free Edition. 
> Version: 7.5.476 / Virus Database: 269.10.14/912 - Release Date: 22-7-2007
> 19:02
>  
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc.
> Still grepping through log files to find problems?  Stop.
> Now Search log events and configuration files using AJAX and a browser.
> Download your FREE copy of Splunk now >>  http://get.splunk.com/
> _______________________________________________
> Efw-user mailing list
> Efw-user@...
> https://lists.sourceforge.net/lists/listinfo/efw-user
> 
> 

--

-- 
View this message in context: http://www.nabble.com/Media-Center-guide-data-tf4138687.html#a11972385
Sent from the efw-user mailing list archive at Nabble.com.

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/

Re: Problem with 2.1.2 install

Hi,

I had the same problem, made the backup in 2.1 and applied it in 2.1.2...
and never could access the EFW from the computer on the green network again.
So I decided to install 2.1.2 from scratch and typed in all the
configuration....everything went fine up to the point were I configured the
ALIAS for the green network. After this alias was configured, no more access
to the firewall was possible... if I reboot the firewall from the console,
it comes back up in the same state.
So I guess you try again without the ALIAS for the green network, because
like this it works for me. Alias for blue and orange can be defined without
any problems.
I never installed 2.1.1, or did the in-place upgrade procedure, because our
EFW is in production and I can't do any more testing...at the moment I have
to live without green ALIAS...

Hope this helps!

oldirtdog wrote:
> 
> Ok, guys... here's one for you... 
> 
> I was having trouble with the 2.1.1 install that I had in place... I
> noticed that the 2.1.2 iso was released on Endian's website, so I decided
> to go ahead and do the upgrade.... There wasn't much that I was making use
> of... Clam, Snort, etc... just some stuff to mess around with.... Now,
> when I went to do the install, everything went fine up to the point that
> it made me reboot... I could login to the firewall from another PC in the
> house and go through the initial setup like normal.... all was well up to
> this point... once it applies the configuration, it never reboots or comes
> back up like normal... if I reboot the firewall from the console, it comes
> back up in the same state... it never lets me login to it again (unless I
> restore factory defaults) nor ping it.... The only odd thing that I
> noticed was the system somehow found the original IP address I had
> assigned to the GREEN interface during the initial install screens....
> EVEN after I ran a full wipe of the hard drive, it STILL found the
> original IP address... What the heck is going on here?
> 
> I am going to install 2.1.1 again tonight and see if it likes it better...
> I never had a problem with the install of 2.1.1 but I thought it would be
> nice to be current again.... I am going to try to do the in-place upgrade
> procedure mentioned on this forum tonight, as well... I will let you know
> what happens... 
> 
> What could be going on during that period where I tell it to "Ok, apply
> configuration!" ????
> 
> Thanks!
> 

--

-- 
View this message in context: http://www.nabble.com/Problem-with-2.1.2-install-tf4178837.html#a11972226
Sent from the efw-user mailing list archive at Nabble.com.

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/

Re: Problem with 2.1.2 install

What exactly do you mean by ALIAS?  When I go through the initial install
(the bootable Linux portion) it only asks me for an IP and Mask... when I go
through the web interface part, the only thing it asks me for when
configuring the GREEN interface is an IP, Mask, Hostname, and Domain... If I
try to erase the Host or Domain, it makes me put them in... obviously, the
IP and Mask have to be put in... I tried changing to a different IP here,
but it makes no difference... it just stops responding.... Where is this
ALIAS thing?  Got a screenshot?

boergnet wrote:
> 
> Hi,
> 
> I had the same problem, made the backup in 2.1 and applied it in 2.1.2...
> and never could access the EFW from the computer on the green network
> again.
> So I decided to install 2.1.2 from scratch and typed in all the
> configuration....everything went fine up to the point were I configured
> the ALIAS for the green network. After this alias was configured, no more
> access to the firewall was possible... if I reboot the firewall from the
> console, it comes back up in the same state.
> So I guess you try again without the ALIAS for the green network, because
> like this it works for me. Alias for blue and orange can be defined
> without any problems.
> I never installed 2.1.1, or did the in-place upgrade procedure, because
> our EFW is in production and I can't do any more testing...at the moment I
> have to live without green ALIAS...
> 
> Hope this helps!
> 
> 
> oldirtdog wrote:
>> 
>> Ok, guys... here's one for you... 
>> 
>> I was having trouble with the 2.1.1 install that I had in place... I
>> noticed that the 2.1.2 iso was released on Endian's website, so I decided
>> to go ahead and do the upgrade.... There wasn't much that I was making
>> use of... Clam, Snort, etc... just some stuff to mess around with....
>> Now, when I went to do the install, everything went fine up to the point
>> that it made me reboot... I could login to the firewall from another PC
>> in the house and go through the initial setup like normal.... all was
>> well up to this point... once it applies the configuration, it never
>> reboots or comes back up like normal... if I reboot the firewall from the
>> console, it comes back up in the same state... it never lets me login to
>> it again (unless I restore factory defaults) nor ping it.... The only odd
>> thing that I noticed was the system somehow found the original IP address
>> I had assigned to the GREEN interface during the initial install
>> screens.... EVEN after I ran a full wipe of the hard drive, it STILL
>> found the original IP address... What the heck is going on here?
>> 
>> I am going to install 2.1.1 again tonight and see if it likes it
>> better... I never had a problem with the install of 2.1.1 but I thought
>> it would be nice to be current again.... I am going to try to do the
>> in-place upgrade procedure mentioned on this forum tonight, as well... I
>> will let you know what happens... 
>> 
>> What could be going on during that period where I tell it to "Ok, apply
>> configuration!" ????
>> 
>> Thanks!
>> 
> 
> 

--

-- 
View this message in context: http://www.nabble.com/Problem-with-2.1.2-install-tf4178837.html#a11981949
Sent from the efw-user mailing list archive at Nabble.com.

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/

egf-2.12 VMWare-image troubles ...

Hi all,

I've downloaded the Endian 2.12 community release VMWare-image and try
to use it.
But since there's no documentation about the image at all, I'm stuck ...
I found in a posting here on the list the pasword for the root-account
and another one (admin) probably for the web-interface.

Sadly I can't reach the web-interface, since the IP-address assigned to
br0 (GREEN-interface) is 192.168.0.15, which I can't reach since I'm in
a class B-network 172.16.0.0.

How can I assign the GREEN interface another IP-address from _my_
network on the _command-line_, so I can reach the web-interface and try
to configure the rest?

I tried "ifconfig -a br0 172.16.100.10 netmask 255.255.0.0" but thus
ifconfig shows me now a reachabele IP-Adress from my network, I can't
access he website.
Probably the default-router setting is wrong ... but I can't find
/etc/sysconfig/ifcfg-br0 or anything like it.

Another annoying thing for me is the US-keyboard layout. Since I live in
Germany, I'd like to change the keyboard-layout. How can I do this?

My last question for now: does anybody of you know, on which Linux
distribution is the VMware-image based? (maybe documentation from there
can help me also)

TIA, cheers from Stuttgart/Germany
Christoph.
--

-- 
Mit freundlichen Gruessen / Yours sincerely
Christoph Haas
Linux User #99546
GnuPG-/PGP-fingerprint: 944B D713 F72F 4398 B156 8089 DA8B 68F1 1543 51C3
GnuPG-/PGP-public-key:
http://blackhole.pca.dfn.de:11371/pks/lookup?op=get&search=0x154351C3

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/

Re: egf-2.12 VMWare-image troubles ...

----- Original Message -----
From: "Christoph Haas" <chhaas-ml@...>
To: efw-user@...
Sent: 03 August 2007 19:43:00 o'clock (GMT+0100) Europe/Berlin
Subject: [Efw-user] egf-2.12 VMWare-image troubles ...

Hi all,

I've downloaded the Endian 2.12 community release VMWare-image and try
to use it.
But since there's no documentation about the image at all, I'm stuck ...
I found in a posting here on the list the pasword for the root-account
and another one (admin) probably for the web-interface.

Sadly I can't reach the web-interface, since the IP-address assigned to
br0 (GREEN-interface) is 192.168.0.15, which I can't reach since I'm in
a class B-network 172.16.0.0.

How can I assign the GREEN interface another IP-address from _my_
network on the _command-line_, so I can reach the web-interface and try
to configure the rest?

I tried "ifconfig -a br0 172.16.100.10 netmask 255.255.0.0" but thus
ifconfig shows me now a reachabele IP-Adress from my network, I can't
access he website.
Probably the default-router setting is wrong ... but I can't find
/etc/sysconfig/ifcfg-br0 or anything like it.

Another annoying thing for me is the US-keyboard layout. Since I live in
Germany, I'd like to change the keyboard-layout. How can I do this?

My last question for now: does anybody of you know, on which Linux
distribution is the VMware-image based? (maybe documentation from there
can help me also)

TIA, cheers from Stuttgart/Germany
Christoph.
-- 
Mit freundlichen Gruessen / Yours sincerely
Christoph Haas
Linux User #99546
GnuPG-/PGP-fingerprint: 944B D713 F72F 4398 B156 8089 DA8B 68F1 1543 51C3
GnuPG-/PGP-public-key:
http://blackhole.pca.dfn.de:11371/pks/lookup?op=get&search=0x154351C3

Hi

Why don't you just download the 2.1.2 iso and install your own copy of EFW under VMware? It's easier than
trying to work out what someones done on their own image.

Regards

Bill

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/

Re: egf-2.12 VMWare-image troubles ...

Hi Christoph

Christoph Haas wrote:
> Sadly I can't reach the web-interface, since the IP-address assigned to
> br0 (GREEN-interface) is 192.168.0.15, which I can't reach since I'm in
> a class B-network 172.16.0.0.

Simply change the ip address of your workstation to an address within
the vmware image's C-network 192.168.0.0, so you can reach the firewall.

Thereafter, if you access the web interface of the firewall on
http://192.168.0.15, you will find a wizard which besides others allows
you to change the ip address and passwords.

If for any purpose you can not change your workstation's ip address,
please report back and i will explain you exactly where to change the ip
address on the image.

> Another annoying thing for me is the US-keyboard layout. Since I live in
> Germany, I'd like to change the keyboard-layout. How can I do this?

Normally you don't need to access the console, since all can be
configured through web. But if you need, you can change the keyboard
layout starting "setup" on the console.

> My last question for now: does anybody of you know, on which Linux
> distribution is the VMware-image based? (maybe documentation from there
> can help me also)

Endian Firewall is an own distribution basically based on sources from
here: ftp://ftp.redhat.com/pub/redhat/linux/enterprise/4/en/os/i386/SRPMS
But it handles configuration very different.

Here you will find the Endian Firewall administrators guide:
http://www.endian.com/en/community/help/documentation/

peter

-- 
:: e n d i a n
:: open source - open minds

:: peter warasin
:: http://www.endian.com   :: peter@...

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/

_______________________________________________
Efw-user mailing list
Efw-user@...
https://lists.sourceforge.net/lists/listinfo/efw-user

Re: egf-2.12 VMWare-image troubles ...

Dear Peter,

Peter Warasin schrieb am 03.08.2007 20:07:
> Hi Christoph
> 
> Christoph Haas wrote:
[...]

> If for any purpose you can not change your workstation's ip address,
> please report back and i will explain you exactly where to change the ip
> address on the image.

please, would you be so kindly and tell me how I can change the
IP-address of the VMWare-image.

Changing the IP-Address of _my workstation_ would cause quite a lot
hassle for me ...

>> Another annoying thing for me is the US-keyboard layout. Since I live in
>> Germany, I'd like to change the keyboard-layout. How can I do this?
> 
> Normally you don't need to access the console, since all can be
> configured through web. But if you need, you can change the keyboard
> layout starting "setup" on the console.

thanks, that worked!

Cheers from Stuttgart on a foggy Saturday morning
Christoph.

--

-- 
Mit freundlichen Gruessen / Yours sincerely
Christoph Haas
Linux User #99546
GnuPG-/PGP-fingerprint: 944B D713 F72F 4398 B156 8089 DA8B 68F1 1543 51C3
GnuPG-/PGP-public-key:
http://blackhole.pca.dfn.de:11371/pks/lookup?op=get&search=0x154351C3

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/

Re: egf-2.12 VMWare-image troubles ...

Hi Christoph,

just edit "/var/efw/ethernet/settings" (with vi or nano) and change the
settings with the ones you need.
After that run "/etc/rc.d/rc.netwizard.reload" to apply the settings and
restart the services.

Enjoy EFW :)
Raphael

Christoph Haas wrote:
> Dear Peter,
>
> Peter Warasin schrieb am 03.08.2007 20:07:
>   
>> Hi Christoph
>>
>> Christoph Haas wrote:
>>     
> [...]
>
>   
>> If for any purpose you can not change your workstation's ip address,
>> please report back and i will explain you exactly where to change the ip
>> address on the image.
>>     
>
> please, would you be so kindly and tell me how I can change the
> IP-address of the VMWare-image.
>
> Changing the IP-Address of _my workstation_ would cause quite a lot
> hassle for me ...
>
>   
>>> Another annoying thing for me is the US-keyboard layout. Since I live in
>>> Germany, I'd like to change the keyboard-layout. How can I do this?
>>>       
>> Normally you don't need to access the console, since all can be
>> configured through web. But if you need, you can change the keyboard
>> layout starting "setup" on the console.
>>     
>
> thanks, that worked!
>
> Cheers from Stuttgart on a foggy Saturday morning
> Christoph.
>
>   
-- 

:: e n d i a n
:: open source - open minds

:: raphael vallazza
:: phone +39 0471 631763  :: fax +39 0471 631764
:: http://www.endian.com  :: raphael (AT) endian.com

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/

_______________________________________________
Efw-user mailing list
Efw-user@...
https://lists.sourceforge.net/lists/listinfo/efw-user