headers
Joseph B. Fitzgerald | 19 Oct 19:19
Favicon

2444698058

This is an automated message from the
  <linrad@...> mailing list manager

Somebody (probably you) have requested the subscribe operation
  for your <jfitzgerald@...> address

If you want to confirm this operation,
  use the Reply command in your mailer.

Check that the Subject of the reply message contains
  the confirmation ID: 2444698058,
  the reply is directed to <linrad-subscribe@...>,
  and the 'From' address of your reply is <jfitzgerald@...>.

If you do not want to confirm the requested operation, simply do nothing

All requests about this mailing list
  should be sent to <linrad-request@...>

#############################################################
This message is sent to you because you are subscribed to
  the mailing list <linrad@...>.
To unsubscribe, E-mail to: <linrad-off@...>
To switch to the DIGEST mode, E-mail to <linrad-digest@...>
To switch to the INDEX mode, E-mail to <linrad-index@...>
Send administrative queries to  <linrad-request@...>
Permalink | Reply | 0 comments |
headers
Joseph B. Fitzgerald | 19 Oct 19:58
Favicon

2444698058

This is an automated message from the
  <linrad@...> mailing list manager

Somebody (probably you) have requested the subscribe operation
  for your <jfitzgerald@...> address

If you want to confirm this operation,
  use the Reply command in your mailer.

Check that the Subject of the reply message contains
  the confirmation ID: 2444698058,
  the reply is directed to <linrad-subscribe@...>,
  and the 'From' address of your reply is <jfitzgerald@...>.

If you do not want to confirm the requested operation, simply do nothing

All requests about this mailing list
  should be sent to <linrad-request@...>

#############################################################
This message is sent to you because you are subscribed to
  the mailing list <linrad@...>.
To unsubscribe, E-mail to: <linrad-off@...>
To switch to the DIGEST mode, E-mail to <linrad-digest@...>
To switch to the INDEX mode, E-mail to <linrad-index@...>
Send administrative queries to  <linrad-request@...>
Permalink | Reply | 0 comments |
headers
Richard Hosking | 20 Oct 01:59
Picon
Picon
Favicon

Re: 2444698058


Joseph B. Fitzgerald wrote:

>This is an automated message from the
>  <linrad@...> mailing list manager
>
>Somebody (probably you) have requested the subscribe operation
>  for your <jfitzgerald@...> address
>
>If you want to confirm this operation,
>  use the Reply command in your mailer.
>
>Check that the Subject of the reply message contains
>  the confirmation ID: 2444698058,
>  the reply is directed to <linrad-subscribe@...>,
>  and the 'From' address of your reply is <jfitzgerald@...>.
>
>If you do not want to confirm the requested operation, simply do nothing
>
>All requests about this mailing list
>  should be sent to <linrad-request@...>
>
>#############################################################
>This message is sent to you because you are subscribed to
>  the mailing list <linrad@...>.
>To unsubscribe, E-mail to: <linrad-off@...>
>To switch to the DIGEST mode, E-mail to <linrad-digest@...>
>To switch to the INDEX mode, E-mail to <linrad-index@...>
>Send administrative queries to  <linrad-request@...>
>
(Continue reading)

Permalink | Reply | 0 comments |
headers
Pierre Vanhoucke | 20 Oct 21:37
Picon

svgalib google group

Hi all,
I am currently trying to get my ATI RADEON X700 card working under 
svgalib-1.9.23 and discovered  that there is a new google group called 
svgalib  at
h t t p : //groups.google.com/group/svgalib

73,
Pierre/ON5GN 

#############################################################
This message is sent to you because you are subscribed to
  the mailing list <linrad@...>.
To unsubscribe, E-mail to: <linrad-off@...>
To switch to the DIGEST mode, E-mail to <linrad-digest@...>
To switch to the INDEX mode, E-mail to <linrad-index@...>
Send administrative queries to  <linrad-request@...>
Permalink | Reply | 0 comments |
headers
Paul Higginson | 22 Oct 13:16
Picon
Picon

Am I wasting my time ?

Hi All

Before I spend any further time researching I wonder if anyone here can 
offer a spot of advice please.

I have an HP C3600 workstation running HP-UX at present.

Am I likely to have any success running Linrad on this machine as is?

Am I likely to have any success putting an alternate OS ( Linux ) on 
this machine?

Just point me in the right direction please before I embark on the 
journey...

I'm not a UNIX man, I can just about get by...

TIA

Paul

--

-- 
73 de Paul GW8IZR
(IO73TI Anglesey)

#############################################################
This message is sent to you because you are subscribed to
  the mailing list <linrad@...>.
To unsubscribe, E-mail to: <linrad-off@...>
To switch to the DIGEST mode, E-mail to <linrad-digest@...>
(Continue reading)

Permalink | Reply | 0 comments |
headers
Christoph Petermann | 24 Oct 19:43
Picon

Linrad on a Debian System ??

Hello all,

after big problems with Suse 10.0 I installed Debian (Knoppix 4.0.1 + a lot of 
Add-Ons) on my computer. Next I wanted to reinstall Linrad (1.34). But here I 
failed.

NASM compiles OK
SVGALIB seems to install OK
Linrad stops while ./configure like this:

configure: error: C preprocessor "/lib/cpp" fails sanity check
See `config.log' for more details.

I see there that some libraries are not ANSI C conform (???)

Anybody here got Linrad on a Debian ("Woody") system running ??

--

-- 
Gruss, Greetings,
73 de Christoph Petermann
-------------------------------------------
DF9CY QRP EME 
350W (JT65) 550W (CW)
9 ele DK7ZB 2.5wl full elevation
50 MHz DX
Astrophotography

see http://www.df9cy.de

#############################################################
(Continue reading)

Permalink | Reply | 0 comments |
headers
Josh Logan | 24 Oct 23:14
Picon

Re: Linrad on a Debian System ??


On Mon, 24 Oct 2005, Christoph Petermann wrote:

> Hello all,
>
> after big problems with Suse 10.0 I installed Debian (Knoppix 4.0.1 + a
> lot of Add-Ons) on my computer. Next I wanted to reinstall Linrad
> (1.34). But here I failed.
>
> NASM compiles OK
> SVGALIB seems to install OK
> Linrad stops while ./configure like this:
>
> configure: error: C preprocessor "/lib/cpp" fails sanity check
> See `config.log' for more details.

What does config.log say?

>
> I see there that some libraries are not ANSI C conform (???)
>
> Anybody here got Linrad on a Debian ("Woody") system running ??

I am using Debian Unstable (Sid), but Stable (Sarge) should work.  W3SZ
has a linrad CD based off of Knoppix that may work well.

Have you done a HD install?  Did you run:
apt-get update
apt-get upgade
(Continue reading)

Permalink | Reply | 0 comments |
headers
'Zaba' OH1ZAA | 24 Oct 23:22
Picon

lir01-35 ; Re: [linrad] Re: Linrad on a Debian System ??


Sirs!

Leif has uploaded a lir01-35 version that seems to work on new distro's.
I have not tried it yet, but I have lir01-34 working with Knoppix 4.0.2
after a HD-install (sudo knoppix-installer). See Rein's User Data Bank:

http://www.nitehawk.com/linrad_dat/

                                      Good luck / 73, "Zaba" OH1ZAA/2

P.S. Leif's 01-35 should also take care of the svgalib_helper related
      to svgalib 1.9.23  if everything is in the right sub-directories

At 14:14 24.10.2005 -0700, KD7HGL wrote:

>On Mon, 24 Oct 2005, Christoph Petermann wrote:
>
> > Hello all,
> >
> > after big problems with Suse 10.0 I installed Debian (Knoppix 4.0.1 + a
> > lot of Add-Ons) on my computer. Next I wanted to reinstall Linrad
> > (1.34). But here I failed.
> >
> > NASM compiles OK
> > SVGALIB seems to install OK
> > Linrad stops while ./configure like this:
> >
> > configure: error: C preprocessor "/lib/cpp" fails sanity check
> > See `config.log' for more details.
(Continue reading)

Permalink | Reply | 0 comments |
headers
w3sz | 24 Oct 23:42
Picon

Re: Linrad on a Debian System ??

HI,

I have Linrad running on 4 Debian systems at the moment, each with unique  
hardware.

I have not seen that error message.

But each of my systems is 'Sarge'.  I have used kernels from 2.4.x thru  
2.6.11 IIRK.

Sarge is now 'stable' and complete.  Why not upgrade to Sarge?

I suspect that the message means that  you don't have the gcc compiler  
installed.

I am not at my Linux machine, but I think

apt-get update
apt-get install gcc

should take care of it if I am correct.

73,

Roger
W3SZ

On Mon, 24 Oct 2005 13:43:43 -0400, Christoph Petermann <cpe@...>  
wrote:
(Continue reading)

Permalink | Reply | 1 comment |
headers
Carsten Esch | 25 Oct 08:20
Picon
Gravatar

lir01-35

... installs here fine under SUSE 9.3 but I still have a problem not related
to 01-35 or 01-34 ...

When I set up the soundcard I get two devices
00: /dev/dsp  1000-192000 Hz 4 Chan. 16 bit RDONLY
01: /dev/dsp0 1000-192000 Hz 4 Chan. 16 bit RDONLY

First question: Where can I disable direct connection from input to output
(using KMix to the time being here)

After that I get a message  'no device found for 8/16 bit output while input
is open'

When I than hit return I get an

INTERNAL ERROR: 1139 (errno=2)
routine:set_analog.io    file:setad.c
No device found for analog output.

So it seems the problem is I can't set up the soundcard for Read & Write? I
could do this before, no idea what I changed ...

Any help is greatly appreciated ...

Thanks!

Carsten, DL6LAU

#############################################################
This message is sent to you because you are subscribed to
(Continue reading)

Permalink | Reply | 0 comments |

Gmane