Koen Kooi | 24 Nov 10:07 2009

Re: opkg r344 install loop?

On 23 nov, 14:56, Koen Kooi <k...@...> wrote:
> On 20 nov, 22:03, Graham Gower <graham.go...@...> wrote:
>
> > 2009/11/21 Koen Kooi <koen.k...@...>:
>
> > > To reply to myself: letting it run for 15 minutes made it work.
>
> > > regards,
>
> > > Koen
>
> > So, there is a problem?
>
> Yes, opkg taking >10 minutes to install a single package is way too
> much on a 600MHz cortex-a8 system..
>
> > I'm sorry, I can't see this so you'll have to provide more info. Such
> > as a sample strace log and full verbose output for a few minutes. If
> > they're large, you can gzip and send to me directly.
>
> I'll try to reproduce it. The logs will be large, since it's
> outputting those message as fast as it can.

I tried with r363 and can't seem to reproduce it, so forget about
it :)

regards,

Koen

(Continue reading)

Graham Gower | 24 Nov 10:22 2009
Picon

Re: Re: opkg r344 install loop?

Probably related to me thinking fdopen(fd, "rw") was valid....

--

You received this message because you are subscribed to the Google Groups "opkg-devel" group.
To post to this group, send email to opkg-devel@...
To unsubscribe from this group, send email to opkg-devel+unsubscribe@...
For more options, visit this group at http://groups.google.com/group/opkg-devel?hl=en.

jlc | 26 Nov 05:14 2009
Picon

opkg file listing problem in R385

After upgrading from R374 to R383, opkg files <pkg> inserts a blank
line between each entry displayed.  The <pkg>.list file created is
OK.  After upgrading to R385 opkg creates a <pkg>.list file with blank
lines and when it lists the files, it adds more blank lines.

--

You received this message because you are subscribed to the Google Groups "opkg-devel" group.
To post to this group, send email to opkg-devel@...
To unsubscribe from this group, send email to opkg-devel+unsubscribe@...
For more options, visit this group at http://groups.google.com/group/opkg-devel?hl=en.

Graham Gower | 26 Nov 06:48 2009
Picon

Re: opkg file listing problem in R385

Ooops. I stuffed up file_util.c. Should be better now. Your info
directory will be full of junk which will need removing... sorry.

Cheers!
-Graham

--

You received this message because you are subscribed to the Google Groups "opkg-devel" group.
To post to this group, send email to opkg-devel@...
To unsubscribe from this group, send email to opkg-devel+unsubscribe@...
For more options, visit this group at http://groups.google.com/group/opkg-devel?hl=en.

Graham Gower | 27 Nov 08:55 2009
Picon

tagging opkg 0.1.7

Hi all,

I intend to tag opkg 0.1.7 and make a release tarball towards the end
of next week. I will not make any changes on trunk until then except
to address issues that arise.

If there are any problems that need to be addressed or any patches
floating around the web that you think I should look at, please speak
up.

-Graham

--

You received this message because you are subscribed to the Google Groups "opkg-devel" group.
To post to this group, send email to opkg-devel@...
To unsubscribe from this group, send email to opkg-devel+unsubscribe@...
For more options, visit this group at http://groups.google.com/group/opkg-devel?hl=en.

John L. Chmielewski | 30 Nov 17:09 2009
Picon

Re: opkg help and documentation

I have attached a tar file containing opk.5, opk-control.5, opkg.8, and
opkg.conf.5.  They are hopefully correct although I think some opkg
functions are not implemented.  The opkg.conf.5 man page needs the
most help to improve it.

On Tue, Nov 24, 2009 at 06:05:52AM +1030, Graham Gower wrote:
> I would like to include the man pages, yes. It would be great if you
> are willing to spend some time on them. I would be happy to review
> them.
> 
> -Graham
> 
> --
> 
> You received this message because you are subscribed to the Google Groups "opkg-devel" group.
> To post to this group, send email to opkg-devel@...
> To unsubscribe from this group, send email to opkg-devel+unsubscribe@...
> For more options, visit this group at http://groups.google.com/group/opkg-devel?hl=.
> 

--

-- 
John

--

You received this message because you are subscribed to the Google Groups "opkg-devel" group.
To post to this group, send email to opkg-devel@...
To unsubscribe from this group, send email to opkg-devel+unsubscribe@...
For more options, visit this group at http://groups.google.com/group/opkg-devel?hl=en.

(Continue reading)

Koen Kooi | 30 Nov 19:22 2009
Picon

Re: tagging opkg 0.1.7

On 27 nov, 08:55, Graham Gower <graham.go...@...> wrote:
> Hi all,
>
> I intend to tag opkg 0.1.7 and make a release tarball towards the end
> of next week. I will not make any changes on trunk until then except
> to address issues that arise.

OE is using r402/trunk now, so if people don't start bitching on the
OE lists soon, it looks pretty good.

> If there are any problems that need to be addressed or any patches
> floating around the web that you think I should look at, please speak
> up.

There were some patches for u-a on the oe-devel list that could go in.

regards,

Koen

--

You received this message because you are subscribed to the Google Groups "opkg-devel" group.
To post to this group, send email to opkg-devel@...
To unsubscribe from this group, send email to opkg-devel+unsubscribe@...
For more options, visit this group at http://groups.google.com/group/opkg-devel?hl=en.

jlc | 1 Dec 01:08 2009
Picon

patch for opkg_download.c compile abort

If configure is run without options, the compile dies because of FALSE
and TRUE being redefined.  This
is true up to R412.

Here is the compiler output followed by the patch:

In file included from opkg_download.c:50:
../libbb/libbb.h:32:1: error: "FALSE" redefined
In file included from /usr/include/krb5.h:7,
                 from /usr/include/openssl/kssl.h:72,
                 from /usr/include/openssl/ssl.h:192,
                 from opkg_download.c:29:
/usr/include/krb5/krb5.h:187:1: error: this is the location of the
previous definition
In file included from opkg_download.c:50:
../libbb/libbb.h:33:1: error: "TRUE" redefined
In file included from /usr/include/krb5.h:7,
                 from /usr/include/openssl/kssl.h:72,
                 from /usr/include/openssl/ssl.h:192,
                 from opkg_download.c:29:
/usr/include/krb5/krb5.h:190:1: error: this is the location of the
previous definition
make[2]: *** [opkg_download.lo] Error 1
make[1]: *** [all] Error 2
make: *** [all-recursive] Error 1

The patch just moves the fixed includes ahead of the conditional
includes:

libopkg/opkg_download.c
(Continue reading)

Camille Moncelier | 1 Dec 09:04 2009

Re: patch for opkg_download.c compile abort

I commited your fix in r413 (with extra #ifndef TRUE and #ifndef FALSE
in libbb.h)

On Tue, Dec 1, 2009 at 1:08 AM, jlc <jlcster@...> wrote:
> If configure is run without options, the compile dies because of FALSE
> and TRUE being redefined.  This
> is true up to R412.
>
> Here is the compiler output followed by the patch:
>
> In file included from opkg_download.c:50:
> ../libbb/libbb.h:32:1: error: "FALSE" redefined
> In file included from /usr/include/krb5.h:7,
>                 from /usr/include/openssl/kssl.h:72,
>                 from /usr/include/openssl/ssl.h:192,
>                 from opkg_download.c:29:
> /usr/include/krb5/krb5.h:187:1: error: this is the location of the
> previous definition
> In file included from opkg_download.c:50:
> ../libbb/libbb.h:33:1: error: "TRUE" redefined
> In file included from /usr/include/krb5.h:7,
>                 from /usr/include/openssl/kssl.h:72,
>                 from /usr/include/openssl/ssl.h:192,
>                 from opkg_download.c:29:
> /usr/include/krb5/krb5.h:190:1: error: this is the location of the
> previous definition
> make[2]: *** [opkg_download.lo] Error 1
> make[1]: *** [all] Error 2
> make: *** [all-recursive] Error 1
>
(Continue reading)

Graham Gower | 2 Dec 00:23 2009
Picon

Re: opkg help and documentation

Excellent, thanks.

I'm not knowledgeable with nroff nor autotools, so please bear with me
while I familiarise myself with them so that this can be smoothly
integrated.

-Graham

--

You received this message because you are subscribed to the Google Groups "opkg-devel" group.
To post to this group, send email to opkg-devel@...
To unsubscribe from this group, send email to opkg-devel+unsubscribe@...
For more options, visit this group at http://groups.google.com/group/opkg-devel?hl=en.


Gmane