headers
Brian Zhou | 1 Oct 2006 05:25
Picon

Re: Apache install - missing file

There was a glitch during openldap 2.2 to 2.3 transition, but it
should be fixed by now. Please try

    ipkg update
    ipkg upgrade openldap openldap-libs

and see if it helps.

-Brian Zhou

--- In nslu2-linux@..., "jx7dfa" <la7dfa <at> ...> wrote:
>
> After (trying to) install Apache with ipkg I am missing
> 'libliber-2.2.so.7'
> Can anyone advice where to find this file and how to get it into the
> NSLU2...  I am a newbie to NSLU2 & Linux.
>

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/nslu2-linux/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/nslu2-linux/join
    (Yahoo! ID required)
(Continue reading)

Permalink | Reply | 1 comment |
headers
Sam | 1 Oct 2006 11:10
Picon

Re: Team Speak Voice chat on a Slug

--- In nslu2-linux@..., "feralcat44g" <feralcat44g <at> ...> 
wrote:
>
> I was hoping that I could get some help in getting a Team Speak Voice
> chat server up and running on my Turbo Slug or my normal Slug. I can
> get the source code for an i386 version of the server but it'll need
> to be compiled and packaged. I'm not sure how to do that though. I 
use
> a cable modem and my external ip changes from time to time. I hope to
> be able to get most of what I currently run from my windows machine
> onto one of my slugs. I have a P4 2.0 Ghz machine with 1024 MB of RAM
> with the primary drive being a Maxtor 300 GB with a promise card with
> a 120 GB and a 80 GB drive. My OS is Windows XP Pro SP2.
>

Teamspeak dont release sources, the best you get are the compiled files

And decompiling them would be illegal

Torrenting whilst gaming won't help either! Especially not on the same 
machine

For those Interested
Teamspeak with MySQL - 
http://showcase.netins.net/web/stage1/INSTALL.mysql

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
(Continue reading)

Permalink | Reply | 0 comments |
headers
Phil Endecott | 1 Oct 2006 13:35

Re: Trying to get Cups to work

> ... init.d ...
> it seems like this is a file?

No, init.d should be a directory.  Maybe it is an empty directory, 
which has confused you?  (The "d" in ".d" stands for "directory".)

Phil.

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/nslu2-linux/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/nslu2-linux/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:nslu2-linux-digest@... 
    mailto:nslu2-linux-fullfeatured@...

<*> To unsubscribe from this group, send an email to:
    nslu2-linux-unsubscribe@...

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
(Continue reading)

Permalink | Reply | 1 comment |
headers
hansem72 | 1 Oct 2006 14:19
Picon

Re: Trying to get Cups to work

--- In nslu2-linux@..., "Phil Endecott"
<spam_from_nslu2_linux <at> ...> wrote:
>
> > ... init.d ...
> > it seems like this is a file?
> 
> No, init.d should be a directory.  Maybe it is an empty directory, 
> which has confused you?  (The "d" in ".d" stands for "directory".)
> 
> 
> Phil.
>

Got a lot further. Cups is now working, I think. I deleted the init.d
file and created the directory.

The webinterface now works, now just to get the printer to print.

When I connect the printer to port 1, no lights or something. Is this
okay? I've changed the the deviceuri to DeviceURI
parallel:/dev/usb/lp0 the printer is on port 1 (disk 1).

My printer is a HP970Cxi, i'm using the HP990 default driver.

Anyone suggestions?

Marco

 
Yahoo! Groups Links
(Continue reading)

Permalink | Reply | 0 comments |
headers
nww | 1 Oct 2006 15:13
Picon
Favicon

Re: Fatslug 256MB

--- In nslu2-linux@..., "stjopa666" <spamstj <at> ...> wrote:
>
> --- In nslu2-linux@..., "sdm485" <steve <at> > wrote:
> >
> > --- In nslu2-linux@..., "CN" <t4chacko <at> > wrote:
> > >
> > > On Sun, 16 Jul 2006 16:57:26 -0000, sdm485 wrote:
> > >
> > > > The kernels have a built in command line that includes
> 'mem=32M...' so
> > > > you will have to recompile the kernel to change that. It sounds
> like
> > > > RedBoot configures the processor to do 64M  but not necessarily in
> two
> > > > banks which is what you are talking about. I am using the Apex
> > > > bootloader configured and built for 2 banks. It would be ideal if
> > > > RedBoot could be retained as the bootloader because the upgrade
> > > > utility etc would still be available. Not really complaining about
> > > > Apex though; it works very well.
> > > >
> > > > sdm485
> > >
> > > Well, I am not setup to compile anything :(  The following may not
> > even be
> > > reasonable questions... If standard RedBoot can use 64M, then what
> > type of
> > > (physicall) memory upgrade is needed to get the 'single' bank
> > system?  Removing the
> > > existing chips first?
> > >
(Continue reading)

Permalink | Reply | 0 comments |
headers
nww | 1 Oct 2006 15:17
Picon
Favicon

Re: Fatslug 256MB

--- In nslu2-linux@..., kinsa <kinsa_manka <at> ...> wrote:
>
> stjopa666 wrote:
> > But you dont get system lockups or data corruption? I could cope with
> > some error messages if the system is stable (at least till .18 is
out).
> > 
> > BTW which kernel patch did you mean, couldnt find anything about it in
> > the .18rc2 changelog.
> 
> I had commented out the line that spews out the error message in the
kernel 
> source and the recompiled kernel ran smoothly for more than a month
without 
> problems.
> 
> BTW, I was running ctorrent during that period which used up all the
available 
> ram (128Mb).
> 
> Kinsa
>

Hi,

When I do a file ramdisk.gz, it gives me the below output instead of
Linux Compressed ROM File System data, big endian as described in
TestAnImageInRamUsingRedBoot. Does anyone have any idea? It suspected
that why I can't load the image.
(Continue reading)

Permalink | Reply | 0 comments |
headers
janne5011 | 1 Oct 2006 17:42
Picon
Favicon

configure, make make install what is needed

as topic.I got a idea I want to try.=). I looked at wiki but was
little confusing =)
I got unslung latest.
what Do I need?
thanks in advance

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/nslu2-linux/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/nslu2-linux/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:nslu2-linux-digest@... 
    mailto:nslu2-linux-fullfeatured@...

<*> To unsubscribe from this group, send an email to:
    nslu2-linux-unsubscribe@...

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
(Continue reading)

Permalink | Reply | 4 comments |
headers
Gordon Farquharson | 1 Oct 2006 19:46
Picon

Re: NSLU2/Debian RTC

Gordon Farquharson <gordonfarquharson <at> ...> writes:

> I can't access my real-time clock on my slug. I am running NSLU2/Debian 
> (testing):
> 
> $ uname -a
> Linux venus 2.6.17-2-nslu2 #1 Thu Sep 14 23:54:15 UTC 2006 armv5tel GNU/Linux

Update: I found that adding rtc-x1205.probe=0,0x6f to the kernel boot options
fixes the problem. I didn't need to change any udev rules.

Gordon

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/nslu2-linux/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/nslu2-linux/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:nslu2-linux-digest@... 
    mailto:nslu2-linux-fullfeatured@...
(Continue reading)

Permalink | Reply | 0 comments |
headers
nww | 1 Oct 2006 20:09
Picon
Favicon

Q: hang after exec 0x01d00000

Hi,

I am about to test my newly built openslug image. I followed the
instructions in
http://www.nslu2-linux.org/wiki/HowTo/TestAnImageInRamUsingRedBoot.
However, it hang when I performed the last step. Does anyone know why?
Below are the steps I did.

== Executing boot script in 1.260 seconds - enter ^C to abort
Telnet escape character is '~'.
Trying 192.168.0.1...
Connected to 192.168.0.1.
Escape character is '~'.
RedBoot> ip_address -l 192.168.0.1 -h 192.168.0.2
IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.1
Default server: 192.168.0.2, DNS server IP: 0.0.0.0
RedBoot> load -r -v -b 0x01000000 -m http /ramdisk.gz                

/------------------------------------------------------------------------
Raw file loaded 0x01000000-0x0101fff3, assumed entry at 0x01000000
RedBoot> cksum                                                       

-------------------------------------------------------------------------------
Raw file loaded 0x01d00000-0x01df24f7, assumed entry at
0x01d00000--------------------------------------------------------------------------------------------
RedBoot>
cksum------------------------------------------------------------------------------------------------------------------------------------------------
Computing cksum for area
0x01d00000-0x01df24f8----------------------------------------------------------------------------------------------------------------
POSIX cksum = 1864616807 992504 (0x6f23cb67 0x000f24f8)
(Continue reading)

Permalink | Reply | 2 comments |
headers
nww | 1 Oct 2006 20:29
Picon
Favicon

Re: Q: hang after exec 0x01d00000

I am using Fedora4 to built the openslug image. 

i.e. make openslug-image

--- In nslu2-linux@..., "nww" <csnww97 <at> ...> wrote:
>
> Hi,
> 
> I am about to test my newly built openslug image. I followed the
> instructions in
> http://www.nslu2-linux.org/wiki/HowTo/TestAnImageInRamUsingRedBoot.
> However, it hang when I performed the last step. Does anyone know why?
> Below are the steps I did.
> 
> 
> == Executing boot script in 1.260 seconds - enter ^C to abort
> Telnet escape character is '~'.
> Trying 192.168.0.1...
> Connected to 192.168.0.1.
> Escape character is '~'.
> RedBoot> ip_address -l 192.168.0.1 -h 192.168.0.2
> IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.1
> Default server: 192.168.0.2, DNS server IP: 0.0.0.0
> RedBoot> load -r -v -b 0x01000000 -m http /ramdisk.gz                
>               
>
/------------------------------------------------------------------------
> Raw file loaded 0x01000000-0x0101fff3, assumed entry at 0x01000000
> RedBoot> cksum                                                       
>
(Continue reading)

Permalink | Reply | 0 comments |

Gmane