Robby Stephenson | 1 Nov 01:10
Gravatar

Re: Music data base, some (25%) UPC not recognized

On Thursday 22 October 2009, Axel Gerber wrote:
> What I wanted to say, with upcscan I found Taj Mahal on amazon.de but now
> cannot find it there when I use tellico. You can see in my initial mail
> it has a amazan.de link
> Sorry I forgot the number.... 10058213925 (Taj Mahal)

For whatever reason, Amazon thinks the UPC is 1005821392 (without the last 
digit). Searching amazon.de with that value gives a successful result.

However, from my reading, a UPC value in the US should probably 12 digits. 
An EAN value in Europe should be 13 digits. None of the formats I looked at 
have 11 digits, like the value you had. Can you verify your UPC value?

> I found one thing funny: it seams UPC (or EAN) with less than 12 digits
> cannot be found, since almost all of the attached ones fail to get
> listed, at least when I go via search-window with the UPC (which I did
> before I found I can export my sqlite3-database from upcscan to csv).
> Also after the big import I will have regularly a lot of UPC's ;-)))

Robby
Robby Stephenson | 1 Nov 01:14
Gravatar

Re: Music data base, some (25%) UPC not recognized

On Friday 23 October 2009, Axel Gerber wrote:
> Hi Robby,
>
>
> Your response time is tough... :-) I am used to time delays but now I
> need to ask you, where are you located to feedback like this? West USA?

Yes, outside Los Angeles.

> B)
> Also this dialog sometimes ask me stupid things since the title can be
> found Just now (see attached) it asks me something where I don't now the
> right answer (none of them sound familiar to me and by title rather than
> artist I cannot find it here) but if I would have a thumbnail of the
> cover in this window would be extremely helpful (also when it asks me for
> three or four diff. issues of the same CD I would remmeber the cover to
> make the right choice)

During an update by title, if the amazon search returns multiple results, 
none of which have a match score high enough to determine which one is the 
correct one to update, then that dialog pops up to allow you to choose. If 
none of those are what you are updating, then it looks like Amazon can't 
tell.

> I don't want only to request. This software is so much what I need, I
> really want to contribute something. So what ever you want me to test.

Just trying to figure out what Amazon considers a value ItemID/UPC/EAN. It 
should be eiterh 12 or 13 digits, but some of the 10-digit values work. Very 
confusing...
(Continue reading)

Robby Stephenson | 1 Nov 01:26
Gravatar

Re: Music recognition

On Friday 23 October 2009, Axel Gerber wrote:
> There is a CD named "Peace Sign" the artist is named WAR (actually
> extremely cool music, one of my favourites).
>
> via upcscan I found it on amazon and actually you can find it also when
> you just go to amazon.com or .de and search for it normally as you wanna
> buy it.
>
> After importing there is an almost empty entry but correctly shows title
> and artist. Now I click "update" and chose amazon.de and it finds
> nothing,

The update does a search by Artist, and there are so many results that match 
War that the one you want doesn't actually show up in the first 25 results. 
That updater should probably be a bit smarter and look for title, too.

> BTW: how can I make a CD in the drive to get scanned/searched via cddb or
> freeddb?

Tellico has to be compiled with CDDB support. It's in the File->Import->From 
Audio  CD.

Robby
Matthew Soffen | 1 Nov 05:27

Automatic crash report generated by DrKonqi for tellico.

Application that crashed: tellico
Version of the application: 2.0
KDE Version: 4.3.2 (KDE 4.3.2)
Qt Version: 4.5.2
Operating System: Linux 2.6.30.9-90.fc11.i586 i686
Distribution: "Fedora release 11 (Leonidas)"

What I was doing when the application crashed:
<In detail, tell us what you were doing  when the application 
crashed.>

 -- Backtrace:
Application: Tellico (tellico), signal: Segmentation fault
[KCrash Handler]
#6  Tellico::Export::HTMLExporter::readOptions 
(this=0xb839a08, config_={d = 0xa2f8488}) at 
/usr/src/debug/tellico-2.0/src/translators/htmlexporter.cpp:521
#7  0x080cdf68 in Tellico::ExportDialog::exporter 
(format_=Tellico::Export::HTML) at 
/usr/src/debug/tellico-2.0/src/exportdialog.cpp:225
#8  0x080ce983 in 
Tellico::ExportDialog::ExportDialog(Tellico::Export::Format, 
Tellico::Data::CollPtr, struct QWidget *) (this=0xbfb12484, 
format_=Tellico::Export::HTML, coll_={d = 0xbfb124f4}, 
    parent_=0xa402db8) at 
/usr/src/debug/tellico-2.0/src/exportdialog.cpp:61
#9  0x0810bddb in Tellico::MainWindow::slotFileExport 
(this=0xa402db8, format_=4) at 
/usr/src/debug/tellico-2.0/src/mainwindow.cpp:1758
#10 0x0810c472 in Tellico::MainWindow::qt_metacall 
(Continue reading)

Robby Stephenson | 1 Nov 17:16
Gravatar

Re: Automatic crash report generated by DrKonqi for tellico.

Thanks! It's been fixed for the next release.

On Saturday 31 October 2009, Matthew Soffen wrote:
> Application that crashed: tellico
> Version of the application: 2.0
> KDE Version: 4.3.2 (KDE 4.3.2)
> Qt Version: 4.5.2
> Operating System: Linux 2.6.30.9-90.fc11.i586 i686
> Distribution: "Fedora release 11 (Leonidas)"
>
> What I was doing when the application crashed:
> <In detail, tell us what you were doing  when the application
> crashed.>
>
>  -- Backtrace:
> Application: Tellico (tellico), signal: Segmentation fault
> [KCrash Handler]
> #6  Tellico::Export::HTMLExporter::readOptions
> (this=0xb839a08, config_={d = 0xa2f8488}) at
> /usr/src/debug/tellico-2.0/src/translators/htmlexporter.cpp:521
> #7  0x080cdf68 in Tellico::ExportDialog::exporter
> (format_=Tellico::Export::HTML) at
> /usr/src/debug/tellico-2.0/src/exportdialog.cpp:225
> #8  0x080ce983 in
> Tellico::ExportDialog::ExportDialog(Tellico::Export::Format,
> Tellico::Data::CollPtr, struct QWidget *) (this=0xbfb12484,
> format_=Tellico::Export::HTML, coll_={d = 0xbfb124f4},
>     parent_=0xa402db8) at
> /usr/src/debug/tellico-2.0/src/exportdialog.cpp:61
> #9  0x0810bddb in Tellico::MainWindow::slotFileExport
(Continue reading)

Favicon

Re: Automatic crash report generated by DrKonqi for tellico.

Talk about a fast turn around.

Thansk !

I guess I'll just have to try and not buy any duplicate books (since I
can't get my updated HTML pages onto my phone).

Matt

> Thanks! It's been fixed for the next release.
>
> On Saturday 31 October 2009, Matthew Soffen wrote:
>> Application that crashed: tellico
>> Version of the application: 2.0
>> KDE Version: 4.3.2 (KDE 4.3.2)
>> Qt Version: 4.5.2
>> Operating System: Linux 2.6.30.9-90.fc11.i586 i686
>> Distribution: "Fedora release 11 (Leonidas)"
>>
>> What I was doing when the application crashed:
>> <In detail, tell us what you were doing  when the application
>> crashed.>
>>
>>  -- Backtrace:
>> Application: Tellico (tellico), signal: Segmentation fault
>> [KCrash Handler]
>> #6  Tellico::Export::HTMLExporter::readOptions
>> (this=0xb839a08, config_={d = 0xa2f8488}) at
>> /usr/src/debug/tellico-2.0/src/translators/htmlexporter.cpp:521
>> #7  0x080cdf68 in Tellico::ExportDialog::exporter
(Continue reading)

Robby Stephenson | 2 Nov 15:47
Gravatar

Tellico 2.1 Released

Tellico 2.1 is available for download at
http://tellico-project.org/files/tellico-2.1.tar.bz2

Changes since version 2.0 include:
    * Fixed crashing bug with HTML export.
    * Fixed bug with auto-formatting for titles and names in the list view.
    * Fixed bug with saving and reloading view settings.
    * Fixed crashing bug when filtering entry with empty title.
    * Fixed compilation with KDE 4.1.
    * Fixed grouping to show empty groups.
    * Fixed filter updating after editing an entry.
    * Fixed bug with using multiple values in table columns.
    * Added PAM/PRISM translator for SRU fetcher.
    * Added data source for searching Wine.com.
    * Changed Amazon and Crossref data sources to store passwords locally 
instead of in the KWallet.
    * Updated GCstar importing for video games and board games.
    * Added feature for exporting to GCstar format.
    * Updated ISBNdb and Discogs data sources to allow user access keys.

Thanks for everyone's feedback and bug reports. Please continue to direct 
comments and issues to this mailing list...

Robby
Michael Rauter | 2 Nov 20:22
Picon

Re: Webcam barcode scanning

Am Freitag, den 30.10.2009, 07:08 +0100 schrieb Sebastian Held:
> Hi,
> 
> Am Donnerstag 29 Oktober 2009 23:38:45 schrieb Michael Rauter:
> > Is it possible to change the device name in tellico?
> 
> Yes, certainly: modify the code and recompile ;)
> There is neither a gui or config file option, but see the file 
> src/barcode/barcode_v4l.cpp
> 
got it configured and compiled, now I get the following error on start:

open("/dev/webcam", O_RDONLY)           = 21
tellico(14233) barcodeRecognition::barcode_v4l::grab_init: v4l: Unable
to find a supported capture format.

Michael
Sebastian Held | 2 Nov 20:48
Picon

Re: Webcam barcode scanning

Am Montag 02 November 2009 20:22:02 schrieb Michael Rauter:
> Am Freitag, den 30.10.2009, 07:08 +0100 schrieb Sebastian Held:
> > Hi,
> >
> > Am Donnerstag 29 Oktober 2009 23:38:45 schrieb Michael Rauter:
> > > Is it possible to change the device name in tellico?
> >
> > Yes, certainly: modify the code and recompile ;)
> > There is neither a gui or config file option, but see the file
> > src/barcode/barcode_v4l.cpp
> 
> got it configured and compiled, now I get the following error on start:
> 
> open("/dev/webcam", O_RDONLY)           = 21
> tellico(14233) barcodeRecognition::barcode_v4l::grab_init: v4l: Unable
> to find a supported capture format.

Tellico uses lib4vl for the conversion process (from webcam to RGB). May be 
your version of libv4l is too old?

Sebastian

> 
> 
> Michael
> 
> _______________________________________________
> tellico-users mailing list
> tellico-users@...
> https://mail.kde.org/mailman/listinfo/tellico-users
(Continue reading)

Mehmet Nur Olcay | 2 Nov 20:56
Picon
Gravatar

Re: Tellico 2.1 Released

On Monday 02 November 2009 16:47:22 Robby Stephenson wrote:
> Tellico 2.1 is available for download at

Hi,

Thanks for the new release and bug fixes, but i have a problem with 2.1

Compiled and installed 2.1 from source, opened my old database, after choosing any movie on the 
list, Tellico got a crash, i can reproduce it everytime. Here's the full backtrace with gdb

http://pastebin.ca/1653561
---
Mehmet Nur Olcay

Gmane