headers
Pavel Heimlich, a.k.a. hajma | 25 Mar 2012 21:54
Picon

binary repository mirror at opensolaris.cz

Hi,
thanks to the opensolaris.cz owner, a binary IPS repo of KDE packages
for Solaris 11 is now running at http://pkg.opensolaris.cz:20000

enjoy

P.

P.S. The packages are a month old there as it's built inside
VirtualBox there and it's a real PITA (randomly stops responding, the
internal network explodes, ...).
___________________________________________________
This message is from the kde-solaris mailing list.
Account management:  https://mail.kde.org/mailman/listinfo/kde-solaris.
Archives: http://lists.kde.org/.
More info: http://www.kde.org/faq.html.
Permalink | Reply | 0 comments |
headers
Adriaan de Groot | 15 Apr 2011 09:26
Picon
Favicon

Solaris 10 support & KDE 4.6.2

Most discussion of KDE4 on Solaris happens over at kde-
discuss <at> opensolaris.org, so this list may have missed that work on KDE4 on 
Solaris 10 has been picked up again (the specfile repo is always readable, drop 
me a note if you want to write to it) and we may even end up with SVR4 
packages again within reasonable time.

Solaris 8 and 9 are EOL and basically out of scope for KDE now.

[ade]
___________________________________________________
This message is from the kde-solaris mailing list.
Account management:  https://mail.kde.org/mailman/listinfo/kde-solaris.
Archives: http://lists.kde.org/.
More info: http://www.kde.org/faq.html.
Permalink | Reply | 0 comments |
headers
Adriaan de Groot | 4 Apr 2011 23:11
Picon
Favicon

KDE4 on Solaris 10, OpenSolaris, OpenIndiana

Most of the activity around KDE4 on Solaris 10 and later (with Sun Studio 12, 
mostly) has moved to the kde-discuss <at> opensolaris.org mailing list or #kde4-
solaris on FreeNode. The techbase page for KDE on Solaris is reasonably up-to-
date.

[ade]

PS. This is a quarterly reminder, sent out when I remember to do so.
___________________________________________________
This message is from the kde-solaris mailing list.
Account management:  https://mail.kde.org/mailman/listinfo/kde-solaris.
Archives: http://lists.kde.org/.
More info: http://www.kde.org/faq.html.
Permalink | Reply | 0 comments |
headers
Raphael Kubo da Costa | 12 Feb 2011 20:35
Picon
Gravatar

Does kinfocenter work as expected on Solaris?

(Please keep me CC'ed as I'm not subscribed to the list)

Hi there,

I'm working a bit on the FreeBSD-specific code in kinfocenter, and I've
noticed there's some #ifdef-ed code in info_solaris.cpp which depends on
HAVE_LIBDEVINFO_H being set.

However, there seems to be no code there to detect it, so the devinfo
code on Solaris is never compiled.

This is of particular interest to me because there is also devinfo(3)
for FreeBSD and DragonFlyBSD, however they are not inspired or
compatible with Solaris' libdevinfo (actually, I don't even know if
libdevinfo still exists on Solaris).

During my work, I will add a FindLibdevinfo.cmake to kde-workspace which
find FreeBSD's devinfo. Given the devinfo code for Solaris is never
compiled, there does not seem to be any risk of problems with that
#ifdef. It would be nice, though, if you guys could check if that piece
of code still works. If it doesn't I can remove it from the code.

Cheers,
rakuco
___________________________________________________
This message is from the kde-solaris mailing list.
Account management:  https://mail.kde.org/mailman/listinfo/kde-solaris.
Archives: http://lists.kde.org/.
More info: http://www.kde.org/faq.html.
(Continue reading)

Permalink | Reply | 2 comments |
headers
Spencer Chirume | 6 Aug 2010 23:49

Spencer Chirume added you as a contact to his Plaxo address book

I added you as a contact to my Plaxo address book.

To accept this connection request, go to:
http://www.plaxo.com/invite?lang=en&i=108233068&k=1093032957&l=en

Thanks,
The Plaxo team

More than 20 million people use Plaxo to keep in touch with the people they care about.

Don't want to receive emails from Plaxo any more? Go to: http://www.plaxo.com/stop 

___________________________________________________
This message is from the kde-solaris mailing list.
Account management:  https://mail.kde.org/mailman/listinfo/kde-solaris.
Archives: http://lists.kde.org/.
More info: http://www.kde.org/faq.html.
Permalink | Reply | 0 comments |
headers
Jan Hnatek | 29 Mar 2010 15:31
Picon

Fwd: Re: [osol-discuss] Korona, Kde, Dolphin and the time slider

This is the proper place for this.

hnhn

-------- Original Message --------
Subject: Re: [osol-discuss] Korona, Kde, Dolphin and the time slider
Date: Mon, 29 Mar 2010 12:38:28 +0100
From: Calum Benson <Calum.Benson <at> Sun.COM>
To: opensolaris-discuss <at> opensolaris.org

On 29/03/2010 10:26, Luca Ferrari wrote:
> Hi all,
> since I'm a kde-desktop user I'm really glad that there is some effort like the
> project Korona to keep KDE up-to-date on OpenSolaris, good job!
> However, I'd like to know if there is some port of the nautilus time slider on
> the dolphin file manager, that will bring KDE the same power as the Gnome
> desktop on OpenSolaris.

No, nobody's working on this AFAIK.  Might be a nice KDE GSoC project
for somebody, though :)

Cheeri,
Calum.

--

-- 
CALUM BENSON, Usability Engineer       Sun Microsystems Ireland
mailto:calum.benson at sun.com         OpenSolaris Desktop Team
http://blogs.sun.com/calum             +353 1 819 9771

Any opinions are personal and not necessarily those of Sun Microsystems
_______________________________________________
opensolaris-discuss mailing list
opensolaris-discuss <at> opensolaris.org
___________________________________________________
This message is from the kde-solaris mailing list.
Account management:  https://mail.kde.org/mailman/listinfo/kde-solaris.
Archives: http://lists.kde.org/.
More info: http://www.kde.org/faq.html.
Permalink | Reply | 0 comments |
headers
Thorsten Hirsch | 15 Dec 2009 10:03
Picon

g++ or sun compiler?

Hi,

as far as I've followed your discussions, it seems that most of you
are using the SunStudio compiler. Is there a special reason for this?
The compiler notes of Qt 4.6
(http://qt.nokia.com/doc/4.6/compiler-notes.html) say, that Sun CC
doesn't support all the features, e.g. WebKit is not supported. And -
it's been some months since I tried Sun CC - it also failed to compile
the concurrent examples.

Since osol ships g++ 3.4.2, which is fully supported (or am I wrong?),
I thought it would be better to use the GNU compiler.

Regards,
Thorsten
___________________________________________________
This message is from the kde-solaris mailing list.
Account management:  https://mail.kde.org/mailman/listinfo/kde-solaris.
Archives: http://lists.kde.org/.
More info: http://www.kde.org/faq.html.
Permalink | Reply | 10 comments |
headers
Pickering, Roger (NIH/NIAAA) [E] | 10 Dec 2009 21:59
Picon

Status

The last post I’ve seen on your site is from Jan. 2008 – almost two years ago.  Has there been any progress since then?  What do you have for Soaris?

 

Thanks,

Roger Pickering

Survey Statistician

Laboratory of Epidemiology and Biometry

National Institute on Alcohol Abuse and Alcoholism

National Institute of Health

___________________________________________________
This message is from the kde-solaris mailing list.
Account management:  https://mail.kde.org/mailman/listinfo/kde-solaris.
Archives: http://lists.kde.org/.
More info: http://www.kde.org/faq.html.
Permalink | Reply | 4 comments |
headers
Pavel Heimlich, a.k.a. hajma | 26 Nov 2009 22:34
Picon

attica build failure

Hi,
attica build is failing on OpenSolaris with the Sun Studio 12 U1
compiler. Could you please have a look at the error messages below?
In general, Sun Studio is more strict about the c++ standards than gcc.
Also I'd file a bug report but I was not able to figure out whether
you have any ?

best regards

hajma

[ 98%] Building CXX object
attica/lib/CMakeFiles/attica.dir/provider.cpp.o
!"/opt/foss/qt4/include/QtCore/qnamespace.h", line 1639: Warning:
Identifier expected instead of "}".
"/home/hajma/Dashboards/kdesupport/srcdir/attica/lib/itemjob.cpp",
line 38: Error: In this declaration "p" is of an incomplete type
"Attica::Message::Parser".
    Where: While instantiating
"Attica::ItemJob<Attica::Message>::parse(const QString&)".
    Where: Instantiated from
Attica::ItemJob<Attica::Message>::ItemJob(const
QSharedPointer<Attica::PlatformDependent>&, const QNetworkRequest&).
"/home/hajma/Dashboards/kdesupport/srcdir/attica/lib/provider.cpp",
line 293:     Where: Instantiated from non-template code.
"/home/hajma/Dashboards/kdesupport/srcdir/attica/lib/itemjob.cpp",
line 39: Error: The type "Attica::Message::Parser" is incomplete.
    Where: While instantiating
"Attica::ItemJob<Attica::Message>::parse(const QString&)".
    Where: Instantiated from
Attica::ItemJob<Attica::Message>::ItemJob(const
QSharedPointer<Attica::PlatformDependent>&, const QNetworkRequest&).
"/home/hajma/Dashboards/kdesuppor!t/srcdir/attica/lib/provider.cpp",
line 293:     Where: Instantiated from non-template code.
"/home/hajma/Dashboards/kdesupport/srcdir/attica/lib/itemjob.cpp",
line 39: Error: The type "Attica::Message::Parser" is incomplete.
    Where: While instantiating
"Attica::ItemJob<Attica::Message>::parse(const QString&)".
    Where: Instantiated from
Attica::ItemJob<Attica::Message>::ItemJob(const
QSharedPointer<Attica::PlatformDependent>&, const QNetworkRequest&).
"/home/hajma/Dashboards/kdesupport/srcdir/attica/lib/provider.cpp",
line 293:     Where: Instantiated from non-template code.
"/home/hajma/Dashboards/kdesupport/srcdir/attica/lib/itemjob.cpp",
line 40: Error: The type "Attica::Message::Parser" is incomplete.
    Where: While instantiating
"Attica::ItemJob<Attica::Message>::parse(const QString&)".
    Where: Instantiated from
Attica::ItemJob<Attica::Message>::ItemJob(const
QSharedPointer<Attica::PlatformDependent>&, const QNetworkRequest&).
"/home/hajma/Dashboards/kdesupport/srcdir/attica/lib/provider.cpp",!
line 293:     Where: Instantiated from non-template code.
"/home/hajma/Dashboards/kdesupport/srcdir/attica/lib/itemjob.cpp",
line 40: Error: The type "Attica::Message::Parser" is incomplete.
    Where: While instantiating
"Attica::ItemJob<Attica::Message>::parse(const QString&)".
    Where: Instantiated from
Attica::ItemJob<Attica::Message>::ItemJob(const
QSharedPointer<Attica::PlatformDependent>&, const QNetworkRequest&).
"/home/hajma/Dashboards/kdesupport/srcdir/attica/lib/provider.cpp",
line 293:     Where: Instantiated from non-template code.
"/home/hajma/Dashboards/kdesupport/srcdir/attica/lib/itemjob.cpp",
line 40: Error: Formal argument data of type const Attica::Metadata&
in call to Attica::BaseJob::setMetadata(const Attica::Metadata&) const
is being passed int.
    Where: While instantiating
"Attica::ItemJob<Attica::Message>::parse(const QString&)".
    Where: Instantiated from
Attica::ItemJob<Attica::Message>::ItemJob(const
QSharedPointer<Attica::PlatformDependent>&, const QNetworkRequest&).
"/home/hajma/Dashboards/kdesupport/srcdir/attica/lib/provider.cpp",
line 293:     Where: Instantiated from non-template code.
6 Error(s) and 1 Warning(s) detected.
gmake[2]: *** [attica/lib/CMakeFiles/attica.dir/provider.cpp.o] Error
6
gmake[1]: *** [attica/lib/CMakeFiles/attica.dir/all] Error 2
gmake: *** [all] Error 2
___________________________________________________
This message is from the kde-solaris mailing list.
Account management:  https://mail.kde.org/mailman/listinfo/kde-solaris.
Archives: http://lists.kde.org/.
More info: http://www.kde.org/faq.html.
Permalink | Reply | 4 comments |
headers
Alexander Neundorf | 17 Nov 2009 22:38
Picon
Favicon

ensuring KDE svn trunk builds on Solaris

Hi,

I'm looking for people who are interested in providing Nightly builds of KDE 4 
svn trunk for Solaris.
Recently we set up cdash dashboards for several KDE modules (kdesupport, 
kdelibs, kdebase, kdepimlibs, kdepim, kdenetwork, kdeadmin, 
kdeaccessibility , kdeexamples) on http://my.cdash.org.

The idea is to build KDE every night on different machines and operating 
systems to make sure it stays building everywhere.
If something breaks, notification emails with the errors can be sent, e.g. to 
this list or to the committers.

Until now only me and Volker Krause are providing Nightly builds there, and 
both on Linux. Now most KDE developers are using Linux, so having Nightly 
builds on non-Linux systems is actually even more important.

So, is anybody here interested to run a Nightly build of KDE on Solaris once 
per day ?

I still have to document this somewhere, probably on techbase, on how to get 
this working.
Short version: check out kdesdk/, there in cmake/scripts/ is a shell script 
Nightlys-2.6.2, which is the shell script which drives the Nightly build on 
my machine. If you open it, the places which have to be changed should be 
obvious, i.e. the path to cmake, setting CMAKE_PREFIX_PATH, and not that much 
more.

So, if you are interested, please let me know and I'll help with setting it 
up.
The first step should probably be that you head over to my.cdash.org and get 
yourself an account there.

Alex
___________________________________________________
This message is from the kde-solaris mailing list.
Account management:  https://mail.kde.org/mailman/listinfo/kde-solaris.
Archives: http://lists.kde.org/.
More info: http://www.kde.org/faq.html.
Permalink | Reply | 8 comments |
headers
Moinak Ghosh | 3 Nov 2009 20:03
Favicon

BeleniX 0.8 Beta1 available via the Network Installer

Hi Folks,

   This release is updated to the more stable KDE 4.3.1 version with
additional fixes and enhancements - several merged in from Fedora
Core 11. All of these are built using Gcc 4.4.1.

Check out the full announcement here:
http://www.belenix.org/content/BeleniX-08-Beta1-available-Network-Installer

Regards,
Moinak.
--

-- 
================================
http://www.belenix.org/
http://moinakg.wordpress.com/
___________________________________________________
This message is from the kde-solaris mailing list.
Account management:  https://mail.kde.org/mailman/listinfo/kde-solaris.
Archives: http://lists.kde.org/.
More info: http://www.kde.org/faq.html.
Permalink | Reply | 0 comments |

Gmane