headers
Lionel NICOLAS | 1 May 2008 01:02

Kolab Web Server Integration

Hi,

I'm trying to configure VirtualHosts in Apache to access to kolab 
services, like horde.mydomain.com, freebusy.mydomain.com, etc ...

On my server I've already an Apache2 webserver bound to the 80 and 443 
ports. I've tried to bind the Kolab's Apache on loopback:81, and use 
modproxy_http and modproxy_html to redirect/rewrite requests/responses 
from my frontend Apache2 to Kolab's Apache server ... To improve 
performances, I modified the httpd.conf.template to use non-ssl 
connection on loopback. To sum up, I've tried to do that :

Client <=> Apache2 [horde.mydomain.com:443] <=> Kolab [127.0.0.1:81/horde]

I don't manage to make this config work :-s . The primary reason is that 
the rewriting of all the URL and HTML (for example the inclusion of CSS 
and JS) is very complicated, and after few hours of config I concluded 
that it was not possible ... :-)

Finally, I'm trying to configure my Apache2 to process Kolab's 
horde/freebusy/etc... (so I could shutdown Kolab's Apache). For the 
moment I've fixed some php5 inclusions errors by editing my php.ini. 
I've no php5 warning when I access to the Horde login page, but after 
submitting my login/pass, I've this error :

*Fatal error*: Call to undefined method Auth_kolab::setAuthError() in 
*/kolab/lib/php/Horde/Auth/imap.php* on line *94

So my question is : Does anyone manage to use Kolab's services in 
Apache2 ? If someboby has a solution for modproxy, I'll be happy too :-p
(Continue reading)

Permalink | Reply | 0 comments |
headers
B. Buehler | 1 May 2008 20:01
Picon

php-mysql and xslt Addon

Hi

How can add on a running 2.2RC2 php-mysql and xslt addon?

If that doesn't work easily, how can i setup this at new-build?

thanks and greetinx

Bernhard
Permalink | Reply | 0 comments |
headers
Lionel NICOLAS | 2 May 2008 02:18

Kolab 2.2rc2 Debian packages [was: Kolab Web Server Integration]

Hi all,

Finally I'm trying to install Mathieu Parent's Debian package on an 
Ubuntu Server 8.04.

I had his repostiory in my sources.list and run an "apt-get update && 
apt-get install kolabd". The install ended succesfully but I cannot run 
Kolab ... After apt-get, I stopped all services (apache, postfix,  ...), 
and I run "kolab_bootstrap -b" to configure Kolab (slapd should not be 
in the packages dependancies because I installed it manually).

During the bootstrap, I got this error :

----------------------------------------------------------------
KOLAB BOOTSTRAP

Check for running webserver on port 80
Check for running webserver on port 443
Check for running imap server on port 143
Check for running imap server on port 220
Check for running imap server on port 585
Check for running imap server on port 993
Check for running pop3 server on port 109
Check for running pop3 server on port 110
Check for running pop3 server on port 473
Check for running pop3 server on port 995
Check for running smtp server on port 25
Check for running smtp server on port 465
Check for running ftp server on port 21
Check for running Amavis Virus Scanner Interface on port 10024
(Continue reading)

Permalink | Reply | 6 comments |
headers
Alain Spineux | 2 May 2008 04:34
Picon

Re: Kolab 2.2rc2 Debian packages [was: Kolab Web Server Integration]

On Fri, May 2, 2008 at 2:18 AM, Lionel NICOLAS <kolab <at> nividic.org> wrote:
> Hi all,
>
>  Finally I'm trying to install Mathieu Parent's Debian package on an
>  Ubuntu Server 8.04.
>
>  I had his repostiory in my sources.list and run an "apt-get update &&
>  apt-get install kolabd". The install ended succesfully but I cannot run
>  Kolab ... After apt-get, I stopped all services (apache, postfix,  ...),
>  and I run "kolab_bootstrap -b" to configure Kolab (slapd should not be
>  in the packages dependancies because I installed it manually).
>
>  During the bootstrap, I got this error :
>
>  ----------------------------------------------------------------
>  KOLAB BOOTSTRAP
>
>  Check for running webserver on port 80
>  Check for running webserver on port 443
>  Check for running imap server on port 143
>  Check for running imap server on port 220
>  Check for running imap server on port 585
>  Check for running imap server on port 993
>  Check for running pop3 server on port 109
>  Check for running pop3 server on port 110
>  Check for running pop3 server on port 473
>  Check for running pop3 server on port 995
>  Check for running smtp server on port 25
>  Check for running smtp server on port 465
>  Check for running ftp server on port 21
(Continue reading)

Permalink | Reply | 4 comments |
headers
Christian Tardif | 2 May 2008 05:20
Picon
Favicon

Horde modules

Apart from the horde modules delivered on the kolab site, how can we 
update them or, at least, add other modules taken from horde website?

I tried, for example, to add dimp... I now can see it, but it is unusable...

--

-- 
Christian Tardif
Permalink | Reply | 2 comments |
headers
Jacquelin Bureau | 2 May 2008 05:39
Picon
Favicon

the last mile troubleshooting ...

Hello,

I'm just finishing to configure a Kolab setup over a xenified SuSE 10.3 kernel (2.6.22.17-0.1-xen version) on a AMD Athlon64 6400+ (4Gb mem).

The installation description posted on the Opensuse Web site went very well (I added two small notices though as a workaround for a small config  glitch over missing apache/php/smarty pathnames in php.ini)

I also installed a Kontact client running on a nearby laptop for testing.

All services are up and running, initial testing has given good results on connectivity (via telnet). My ISP blocks both smtp 25 and 465, but I worked my way around that too.

Despite all goodness that happen during this installation, I'm not able to send a mail via Kontact on my laptop to an outside address (my address at Y!) th rough Kolab :-s  I'm able to get from imap internal mails sent through mailx but nothing else.

I reconfigured services in kolab to accept internet mail and gave an alternate smtp service over an obscure port, I even dropped all firewall on both portable and the server... with no results...

the "worst", even with kolab logging "verbosis" at level 4, the messages log holds only usual housekeeping suff (with a T_ Debug prefix).   Archiving are ok, etc....  same for mail.err and its related logs.

Cyrus imapd fumbled over  "dracconn:localhost RPC program not registered, but seems to move along (and logs a DRAC notifications disabled).

I need some suggestion to troubleshoot this installation and close the loop to put the server online. 

Thanks in advance,

J.Bureau

All new Yahoo! Mail - Get a sneak peak at messages with a handy reading pane.
_______________________________________________
Kolab-users mailing list
Kolab-users <at> kolab.org
https://kolab.org/mailman/listinfo/kolab-users
Permalink | Reply | 0 comments |
headers
Richard Bos | 2 May 2008 09:30
X-Face
Picon
Gravatar

Re: the last mile troubleshooting ...

Op Friday 02 May 2008 05:39:25 schreef Jacquelin Bureau:
> Despite all goodness that happen during this installation, I'm not able to
> send a mail via Kontact on my laptop to an outside address (my address at
> Y!) through Kolab :-s  I'm able to get from imap internal mails sent
> through mailx but nothing else.
>
> I reconfigured services in kolab to accept internet mail and gave an
> alternate smtp service over an obscure port, I even dropped all firewall on
> both portable and the server... with no results...
>
> the "worst", even with kolab logging "verbosis" at level 4, the messages
> log holds only usual housekeeping suff (with a T_ Debug prefix).  
> Archiving are ok, etc....  same for mail.err and its related logs.
>
> Cyrus imapd fumbled over  "dracconn:localhost RPC program not registered,
> but seems to move along (and logs a DRAC notifications disabled).
>
> I need some suggestion to troubleshoot this installation and close the loop
> to put the server online.

Have a look at the logs in /var/log/kolab/
Perhaps they give you the information you're looking for.

--

-- 
Richard Bos
We are borrowing the world of our children,
It is not inherited from our parents.
Permalink | Reply | 0 comments |
headers
Klaus Vink Slott | 2 May 2008 10:22
Picon

Re: the last mile troubleshooting ...

On 2. May 2008 Jacquelin Bureau wrote:
> (I added two small notices though as a workaround for a small config
>  glitch over missing apache/php/smarty pathnames in php.ini)
Im am currently trying to follow the same guide, but I am stuck at the php.ini 
path correction. Can you possibly share a little more info on what you have 
added to the path to make it work.

--

-- 
Regards
Klaus Vink Slott
Permalink | Reply | 0 comments |
headers
Gunnar Wrobel | 2 May 2008 14:47
Picon
Gravatar

Re: Freebusy Information blended

Hi Saim,

Saim Kim <s.kim <at> hia.rwth-aachen.de> writes:

> Hello,
>
> found another strange behavior:
>
> If one user adds an all day event to his personal calendar and adds 
> another person to it, then the freebusy information of all users on the 
> server shows that they are supposedly busy even though they are not.

Sounds wrong. Please add a bug in the bug tracker. Thanks!

Cheers,

Gunnar

>
> Saim
>
> -- 
> --------------------------------------------------------------------------
> Dipl.-Ing. Saim Kim
> Lehrstuhl fuer Medizinische Informationstechnik
> Helmholtz-Institut fuer Biomedizinische Technik
> RWTH Aachen
> Pauwelsstr. 20, D-52074 Aachen
> ---
> Web:   http://www.medit.hia.rwth-aachen.de/
> Tel:   +49-(0)241-80 23218
> Fax:   +49-(0)241-80 82442
> email: s.kim <at> hia.rwth-aachen.de
> -------------------------------------------------------------------------- 
>
> _______________________________________________
> Kolab-users mailing list
> Kolab-users <at> kolab.org
> https://kolab.org/mailman/listinfo/kolab-users

--

-- 
______ http://kdab.com _______________ http://kolab-konsortium.com _

p <at> rdus Kolab work is funded in part by KDAB and the Kolab Konsortium

____ http://www.pardus.de _________________ http://gunnarwrobel.de _
E-mail : p <at> rdus.de                                 Dr. Gunnar Wrobel
Tel.   : +49 700 6245 0000                          Bundesstrasse 29
Fax    : +49 721 1513 52322                          D-20146 Hamburg
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   >> Mail at ease - Rent a kolab groupware server at p <at> rdus <<                 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Permalink | Reply | 0 comments |
headers
Gunnar Wrobel | 2 May 2008 14:49
Picon
Gravatar

Re: Kolab Web Server Integration

Hi Lionel,

Lionel NICOLAS <kolab <at> nividic.org> writes:

> Hi,
>
> I'm trying to configure VirtualHosts in Apache to access to kolab 
> services, like horde.mydomain.com, freebusy.mydomain.com, etc ...
>
> On my server I've already an Apache2 webserver bound to the 80 and 443 
> ports. I've tried to bind the Kolab's Apache on loopback:81, and use 
> modproxy_http and modproxy_html to redirect/rewrite requests/responses 
> from my frontend Apache2 to Kolab's Apache server ... To improve 
> performances, I modified the httpd.conf.template to use non-ssl 
> connection on loopback. To sum up, I've tried to do that :
>
> Client <=> Apache2 [horde.mydomain.com:443] <=> Kolab [127.0.0.1:81/horde]
>
> I don't manage to make this config work :-s . The primary reason is that 
> the rewriting of all the URL and HTML (for example the inclusion of CSS 
> and JS) is very complicated, and after few hours of config I concluded 
> that it was not possible ... :-)
>
> Finally, I'm trying to configure my Apache2 to process Kolab's 
> horde/freebusy/etc... (so I could shutdown Kolab's Apache). For the 
> moment I've fixed some php5 inclusions errors by editing my php.ini. 
> I've no php5 warning when I access to the Horde login page, but after 
> submitting my login/pass, I've this error :
>
> *Fatal error*: Call to undefined method Auth_kolab::setAuthError() in 
> */kolab/lib/php/Horde/Auth/imap.php* on line *94
>
> So my question is : Does anyone manage to use Kolab's services in 
> Apache2 ? If someboby has a solution for modproxy, I'll be happy too :-p

Sounds like you are using Kolab-Server-2.1. Is that correct? If that
problem is not absolutely urgent for you I'd suggest to wait for the
final 2.2 release which is due in about a month. This will come with
apache2 which might make things much easier for you.

Cheers,

Gunnar

>
> Thanks.
>
> --
> Lionel
> *
>
> _______________________________________________
> Kolab-users mailing list
> Kolab-users <at> kolab.org
> https://kolab.org/mailman/listinfo/kolab-users

--

-- 
______ http://kdab.com _______________ http://kolab-konsortium.com _

p <at> rdus Kolab work is funded in part by KDAB and the Kolab Konsortium

____ http://www.pardus.de _________________ http://gunnarwrobel.de _
E-mail : p <at> rdus.de                                 Dr. Gunnar Wrobel
Tel.   : +49 700 6245 0000                          Bundesstrasse 29
Fax    : +49 721 1513 52322                          D-20146 Hamburg
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   >> Mail at ease - Rent a kolab groupware server at p <at> rdus <<                 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Permalink | Reply | 4 comments |

Gmane