Brad Ralph | 1 May 02:17 2007
Picon

Re: Deleted User waiing for Cleanup

On Tuesday 01 May 2007 2:33:53 am Rene Marticke wrote:
> Thomas Arendsen Hein schrieb:
> > * Rene Marticke <install <at> marticke.net> [20070427 12:53]:
> >> We have a problem on our kolab Server. I delete a user but in the WebIF
> >> the Account is still shown and the message "User delete waiting for
> >> cleanup" is shown several hours. Can you advise me how i can fix this ?
> >
> > Which Kolab server version?
> >
> > You can try restarting kolabd:
> >
> > # /kolab/bin/openpkg rc kolabd restart
> >
> > If user accounts are still not created or deleted, you can try
> > removing the file /kolab/var/kolab/mailbox-uidcache.db and
> > restarting kolabd.
>
> Hi, it Version 2.0.3  but it doesn't work.
> The file mailbox-uidcache.db was generate but without any effekt ?!
>
> Regards Rene
>
> > Regards,
> > Thomas
>
> _______________________________________________
> Kolab-users mailing list
> Kolab-users <at> kolab.org
> https://kolab.org/mailman/listinfo/kolab-users

(Continue reading)

rajnish kumar | 1 May 12:28 2007
Picon

Kolab with 1500 user's

> To: kolab-users <at> kolab.org
> Date: Sun, 29 Apr 2007 16:13:33 +0530
> Subject: Kolab with 1500 user's
> Dear experts and Gunnar sir
>                    Actually now a days i was try to testing open
> source collaboration suits lastly i was stop with zimbra and kolab but
> i see that zimbra is not completly open source suite ultimetly i am on
> the way of kolab so dear i required some advice by all of you.
>
> I have intel based 64 bit server. I want 1500 user's in kolab
>
> 1.  which Operating System should i choose ( Fedora, CentOs, Debian,
> Gentoo ) for kolab.
>
> 2. What Partition should be used for better performance..
>
> 3. For 1500 hundred user's how much Ram required and speed of
> processor required.
>
> 4. We required about 2 TB hard disk space for mails so should i go for
> Lvm or  RAID
>
> 5. How kolab support  cluster and high availability .
>
> with regds
> rajnish
>
>
>
> _______________________________________________
(Continue reading)

Jason McVeigh | 1 May 17:30 2007
Picon

Kontact - Could not connect to host

Hello;

I have recently installed KOLAB on my server.  The installation appears to be successful.  I can access the Kolab "Manage Services" section from my web browser.  I have created a user.  I am attempting to configure that user within Kontact.  I have tried various methods including 'kolabwizard' and the manual configuration described within the documentation.  I receive the error message "could not connect to host" within KMail when I attempt to use the Kolab Server mail.  I would appreciate some help in regards to this issue.  I can provide any information about the setup required.  Thank you for your time and consideration.

Sincerely
Jason (KidsCo)

_______________________________________________
Kolab-users mailing list
Kolab-users <at> kolab.org
https://kolab.org/mailman/listinfo/kolab-users
Nuno Silva | 1 May 18:56 2007

Re: Kolab with 1500 user's


Hello.

rajnish kumar wrote:
> Dear experts and Gunnar sir
>                    Actually now a days i was try to testing open
> source collaboration suits lastly i was stop with zimbra and kolab but
> i see that zimbra is not completly open source suite ultimetly i am on
> the way of kolab so dear i required some advice by all of you.
> 
> I have intel based 64 bit server. I want 1500 user's in kolab
> 
> 1.  which Operating System should i choose ( Fedora, CentOs, Debian,
> Gentoo ) for kolab.

I'd say to use the one you're most confortable with and has a stable
version with long term support. For me this means CentOS, Debian stable
or Ubuntu 6.06 LTS.

> 2. What Partition should be used for better performance..

Filesystem? Without entering the fs-war, I'd say ext3 or XFS. I use XFS.

> 3. For 1500 hundred user's how much Ram required and speed of
> processor required.

A modern server with 4GB of RAM may work for you... YMMV.

Please note that most cyrus (the IMAP daemon in Kolab) setups are
constrained by the storage performance, not CPU or RAM.

> 4. We required about 2 TB hard disk space for mails so should i go for
> Lvm or  RAID

You should invest as much as you can in storage's reliability and
performance. This is what makes the most difference!

You can go for a SAN setup or hardware RAID or software RAID. Depends on
budget =)

> 5. How kolab support  cluster and high availability .

Depends very much in your storage setup. For me, the easiest way should
be a SAN setup.

Maybe you can search the cyrus-imapd archives for tips and known good
setups. You may want to install other components (ldap server, apache,
etc) in other servers.

I hope this is a good starting point for you learn more.

Regards,
Nuno Silva

P.S. Please note that I don't have any large Kolab setup. I have,
however, large Cyrus setups, so my tips may be more Cyrus oriented.
Maybe in a few months I'll have a large Kolab setup in production :-)
rajnish kumar | 2 May 12:06 2007
Picon

Re: Kolab-users Digest, Vol 39, Issue 2

would you able to thunderbird or any other mail client to configre
your imap from kolab
server ?
with regd
rajnish

On 5/2/07, kolab-users-request <at> kolab.org <kolab-users-request <at> kolab.org> wrote:
> Send Kolab-users mailing list submissions to
>         kolab-users <at> kolab.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         https://kolab.org/mailman/listinfo/kolab-users
> or, via email, send a message with subject or body 'help' to
>         kolab-users-request <at> kolab.org
>
> You can reach the person managing the list at
>         kolab-users-owner <at> kolab.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Kolab-users digest..."
>
> Today's Topics:
>
>    1. Kolab with 1500 user's (rajnish kumar)
>    2. Kontact - Could not connect to host (Jason McVeigh)
>    3. Re: Kolab with 1500 user's (Nuno Silva)
>
>
> ---------- Forwarded message ----------
> From: "rajnish kumar" <kumarrajnishgupta <at> gmail.com>
> To: kolab-users <at> kolab.org
> Date: Tue, 1 May 2007 15:58:18 +0530
> Subject: Kolab with 1500 user's
> > To: kolab-users <at> kolab.org
> > Date: Sun, 29 Apr 2007 16:13:33 +0530
> > Subject: Kolab with 1500 user's
> > Dear experts and Gunnar sir
> >                    Actually now a days i was try to testing open
> > source collaboration suits lastly i was stop with zimbra and kolab but
> > i see that zimbra is not completly open source suite ultimetly i am on
> > the way of kolab so dear i required some advice by all of you.
> >
> > I have intel based 64 bit server. I want 1500 user's in kolab
> >
> > 1.  which Operating System should i choose ( Fedora, CentOs, Debian,
> > Gentoo ) for kolab.
> >
> > 2. What Partition should be used for better performance..
> >
> > 3. For 1500 hundred user's how much Ram required and speed of
> > processor required.
> >
> > 4. We required about 2 TB hard disk space for mails so should i go for
> > Lvm or  RAID
> >
> > 5. How kolab support  cluster and high availability .
> >
> > with regds
> > rajnish
> >
> >
> >
> > _______________________________________________
> > Kolab-users mailing list
> > Kolab-users <at> kolab.org
> > https://kolab.org/mailman/listinfo/kolab-users
> >
> >
>
>
>
>
> ---------- Forwarded message ----------
> From: "Jason McVeigh" <jason.mcveigh <at> gmail.com>
> To: kolab-users <at> kolab.org
> Date: Tue, 1 May 2007 11:30:42 -0400
> Subject: Kontact - Could not connect to host
> Hello;
>
> I have recently installed KOLAB on my server.  The installation appears to
> be successful.  I can access the Kolab "Manage Services" section from my web
> browser.  I have created a user.  I am attempting to configure that user
> within Kontact.  I have tried various methods including 'kolabwizard' and
> the manual configuration described within the documentation.  I receive the
> error message "could not connect to host" within KMail when I attempt to use
> the Kolab Server mail.  I would appreciate some help in regards to this
> issue.  I can provide any information about the setup required.  Thank you
> for your time and consideration.
>
> Sincerely
> Jason (KidsCo)
>
>
> ---------- Forwarded message ----------
> From: Nuno Silva <nuno.silva <at> vgertech.com>
> To: rajnish kumar <kumarrajnishgupta <at> gmail.com>
> Date: Tue, 01 May 2007 17:56:56 +0100
> Subject: Re: Kolab with 1500 user's
>
> Hello.
>
> rajnish kumar wrote:
> > Dear experts and Gunnar sir
> >                    Actually now a days i was try to testing open
> > source collaboration suits lastly i was stop with zimbra and kolab but
> > i see that zimbra is not completly open source suite ultimetly i am on
> > the way of kolab so dear i required some advice by all of you.
> >
> > I have intel based 64 bit server. I want 1500 user's in kolab
> >
> > 1.  which Operating System should i choose ( Fedora, CentOs, Debian,
> > Gentoo ) for kolab.
>
>
> I'd say to use the one you're most confortable with and has a stable
> version with long term support. For me this means CentOS, Debian stable
> or Ubuntu 6.06 LTS.
>
>
> > 2. What Partition should be used for better performance..
>
>
> Filesystem? Without entering the fs-war, I'd say ext3 or XFS. I use XFS.
>
>
> > 3. For 1500 hundred user's how much Ram required and speed of
> > processor required.
>
>
> A modern server with 4GB of RAM may work for you... YMMV.
>
> Please note that most cyrus (the IMAP daemon in Kolab) setups are
> constrained by the storage performance, not CPU or RAM.
>
>
> > 4. We required about 2 TB hard disk space for mails so should i go for
> > Lvm or  RAID
>
>
> You should invest as much as you can in storage's reliability and
> performance. This is what makes the most difference!
>
> You can go for a SAN setup or hardware RAID or software RAID. Depends on
> budget =)
>
>
> > 5. How kolab support  cluster and high availability .
>
> Depends very much in your storage setup. For me, the easiest way should
> be a SAN setup.
>
> Maybe you can search the cyrus-imapd archives for tips and known good
> setups. You may want to install other components (ldap server, apache,
> etc) in other servers.
>
> I hope this is a good starting point for you learn more.
>
> Regards,
> Nuno Silva
>
>
> P.S. Please note that I don't have any large Kolab setup. I have,
> however, large Cyrus setups, so my tips may be more Cyrus oriented.
> Maybe in a few months I'll have a large Kolab setup in production :-)
>
>
>
> _______________________________________________
> Kolab-users mailing list
> Kolab-users <at> kolab.org
> https://kolab.org/mailman/listinfo/kolab-users
>
>
Q Kong | 2 May 20:18 2007
Picon

help on sending mail

hi all
i'm new to kolab,
I can not send email to internet, the following is the information in postfix.log, please help me.
thanks ahead.
May 02 10:14:42 main.aviyatechnologies.com <info> postfix/pipe[31488]: F2F8A30B64: to=<kongqyk <at> gmail.com>, relay=kolabfilter, delay=1, status=sent ( main.aviyatechnologies.com)
May 02 10:14:42 main.aviyatechnologies.com <info> postfix/qmgr[24957]: F2F8A30B64: removed
May 02 10:14:42 main.aviyatechnologies.com <info> postfix/smtp[31492]: connect to 127.0.0.1[127.0.0.1]: Connection refused (port 10024)
May 02 10:14:42 main.aviyatechnologies.com <info> postfix/smtp[31492]: 1259F30B65: to=<kongqyk <at> gmail.com>, relay=none, delay=0, status=deferred (connect to 127.0.0.1[127.0.0.1]: Connection refused)
May 02 10:14:44 main.aviyatechnologies.com <info> postfix/smtpd[31482]: disconnect from unknown[ 172.16.16.2]
"
 
Q
_______________________________________________
Kolab-users mailing list
Kolab-users <at> kolab.org
https://kolab.org/mailman/listinfo/kolab-users
Nuno Silva | 2 May 20:23 2007

Re: Kolab-users Digest, Vol 39, Issue 2


Hello.

rajnish kumar wrote:
> would you able to thunderbird or any other mail client to configre
> your imap from kolab
> server ?

Not sure I understand. I'll answer anyway =)

You can use any standard email client (POP/IMAP) to access email
services. The non-email features (global addressbook, shared calendar,
etc) require special clients or plugins. Please look at the wiki for
supported clients.

Regards,
Nuno Silva
Gunnar Wrobel | 3 May 14:58 2007
Picon

Re: help on sending mail

"Q Kong" <kongqyk <at> gmail.com> writes:

> hi all
> i'm new to kolab,
> I can not send email to internet, the following is the information in postfix.log, please help me.
> thanks ahead.
> " 
> May 02 10:14:42 main.aviyatechnologies.com <info> postfix/pipe[31488]: F2F8A30B64:
to=<kongqyk <at> gmail.com>, relay=kolabfilter, delay=1, status=sent ( 
> main.aviyatechnologies.com)
> May 02 10:14:42 main.aviyatechnologies.com <info> postfix/qmgr[24957]: F2F8A30B64: removed
> May 02 10:14:42 main.aviyatechnologies.com <info> postfix/smtp[31492]: connect to
127.0.0.1[127.0.0.1]: Connection refused (port 10024)
> May 02 10:14:42 main.aviyatechnologies.com <info> postfix/smtp[31492]: 1259F30B65:
to=<kongqyk <at> gmail.com>, relay=none, delay=0, status=deferred (connect to 127.0.0.1[
> 127.0.0.1]: Connection refused)
> May 02 10:14:44 main.aviyatechnologies.com <info> postfix/smtpd[31482]: disconnect from unknown[ 172.16.16.2]
> "

Somehow looks like your amavis process is not running.

Do you see the process?

ps aux | grep amavisd
amavis    3236  0.0  1.2  58808 48748 ?        Ss   11:21   0:00 amavisd (master)
amavis    3254  0.0  1.1  59440 47588 ?        S    11:21   0:00 amavisd (virgin child)

If it is not, check the configuration.

And is it listening on 127.0.0.1?

netstat -n -l -p | grep amavisd
tcp        0      0 127.0.0.1:10024         0.0.0.0:*               LISTEN      3236/amavisd (maste 

If not, check the amavisd configuration at
/kolab/etc/kolab/templates/amavisd.conf.template.

Cheers,

Gunnar

--

-- 
____ http://www.pardus.de _________________ http://gunnarwrobel.de _

    >> Mail at ease - Rent a kolab groupware server at p <at> rdus <<

p <at> rdus Kolab work is funded in part by KDAB and the Kolab Konsortium
Gunnar Wrobel | 3 May 15:10 2007
Picon

Re: Kontact - Could not connect to host

Hi Jason,

"Jason McVeigh" <jason.mcveigh <at> gmail.com> writes:

> Hello;
>
> I have recently installed KOLAB on my server.  The installation
> appears to be successful.  I can access the Kolab "Manage Services"
> section from my web browser.  I have created a user.  I am
> attempting to configure that user within Kontact.  I have tried
> various methods including 'kolabwizard' and the manual configuration
> described within the documentation.  I receive the error message
> "could not connect to host" within KMail when I attempt to use the
> Kolab Server mail.  I would appreciate some help in regards to this
> issue.  I can provide any information about the setup required.
> Thank you for your time and consideration.

would be good to know the basic linux distribution and exact version
of the Kontact client.

Can you connect to the kolab server using another client like Outlook,
Thunderbird or the like?

Cheers,

Gunnar

--

-- 
____ http://www.pardus.de _________________ http://gunnarwrobel.de _

    >> Mail at ease - Rent a kolab groupware server at p <at> rdus <<

p <at> rdus Kolab work is funded in part by KDAB and the Kolab Konsortium
Gunnar Wrobel | 3 May 15:21 2007
Picon

Re: installing with OpenPKG: obmtool:ERROR: bootstrapping failed

"micobros" <micobros <at> gmail.com> writes:

> Hello,
>
> I’m trying to install Kolab on Debian 3.1 with OpenPKG and I should have the required developing
libraries (apt-get install build-essential)
>
> I first installed OpenPKG (binary) with no errors like described here: http://www.openpkg.org/documentation/tutorial/
>
> Than, I downloaded kolab server sources from: http://ftp.belnet.be/packages/kolab/server/release/kolab-server-2.0.4/sources/
>
> And followed the 1st.README in that same directory for installation of KOLAB.
>
> I launched this command: # ./obmtool kolab 2>&1 | tee kolab-build.log
>
> And everything started to compile… Until… Error occurred!
>
> The kolab-build.log is available here: http://www.liegesansfil.be/kolab-build.log
>
> And here is the error:
>
> In file included from /usr/include/inttypes.h:28,
>
>                  from system.h:17,
>
>                  from file.c:28:
>
> /usr/include/stdint.h:49: error: duplicate 'unsigned'
>
> /usr/include/stdint.h:49: error: two or more data types in declaration specifiers
>
> /usr/include/stdint.h:50: error: duplicate 'unsigned'
>
> /usr/include/stdint.h:50: error: duplicate 'short'
>
> /usr/include/stdint.h:52: error: duplicate 'unsigned'
>
> /usr/include/stdint.h:52: error: two or more data types in declaration specifiers

Maybe this older mail helps:

http://www.intevation.de/pipermail/kolab-devel/2005-August/004182.html

What gcc version are you using?

Cheers,

Gunnar

--

-- 
____ http://www.pardus.de _________________ http://gunnarwrobel.de _

    >> Mail at ease - Rent a kolab groupware server at p <at> rdus <<

p <at> rdus Kolab work is funded in part by KDAB and the Kolab Konsortium

_______________________________________________
Kolab-users mailing list
Kolab-users <at> kolab.org
https://kolab.org/mailman/listinfo/kolab-users

Gmane