Bernhard Reiter | 1 Nov 19:13 2004
Picon

Re: External users can't send mail to their own domain

On Wednesday 20 October 2004 05:13, alex wrote:
> I have a kolab 2 server setup and it is working very well for all users
> in the office. I have two external users who cannot send mail to the
> domain. The users have accounts on the kolab server. 

This is almost like them being internal. :-)

> They are using
> their own smtp server, but their imap account is on the kolab server.

What about using the kolab server as their smpt server,
this might solve the issue.

> Below is the message I get in the Mail delivery failed email:
>
> This message was created automatically by mail delivery software.
>
> A message that you sent could not be delivered to one or more of its
> recipients. This is a permanent error. The following address(es) failed:
>
>   don <at> mydomain.net
>     SMTP error from remote mailer after RCPT TO:<don <at> mydomain.net>:
>     host mail.mydomain.net [4.35.170.39]: 554 <alex <at> mydomain.net>:
>     Sender address rejected: Invalid sender

Kolab2 wants to offer some protection against 
other people forging email addresses.
So usually you need to insert email authenticated if it has
an internal email address. Another possibility is to make
that smpt server trusted (add it in the services tab).
(Continue reading)

alex | 3 Nov 17:34 2004

Re: External users can't send mail to their own domain

Thanks for the reply.
I ended up using the kolab2 smtp server for these users. I did not want 
to enter the other smtp servers as trusted because I don't trust comcast 
and verizon!
Thus far, Kolab2 is running exceptionally well.

Bernhard Reiter wrote:

>On Wednesday 20 October 2004 05:13, alex wrote:
>  
>
>>I have a kolab 2 server setup and it is working very well for all users
>>in the office. I have two external users who cannot send mail to the
>>domain. The users have accounts on the kolab server. 
>>    
>>
>
>This is almost like them being internal. :-)
>
>  
>
>>They are using
>>their own smtp server, but their imap account is on the kolab server.
>>    
>>
>
>What about using the kolab server as their smpt server,
>this might solve the issue.
>
>  
(Continue reading)

Martin Konold | 3 Nov 22:18 2004
Picon

Re: apache misconfiguration for webdav

Am Freitag, 29. Oktober 2004 12:26 schrieb Luca Villani:

Hi luca,

> Resolving this problem was easy: I simply put two correct ServerName
> directives in httpd.conf.template, both for plain and ssl sections.

Please provide a patch.

Regards,
-- martin

"I am committed to helping Ohio deliver its electoral votes to the
President next year."  -- Wally O'Dell - CEO of Diebold, Inc. 
e r f r a k o n
Erlewein, Frank, Konold & Partner - Beratende Ingenieure und Physiker
Martin Konold | 3 Nov 22:21 2004
Picon

Re: Questions about using kolab2 and kontact

Am Freitag, 29. Oktober 2004 10:09 schrieb Timo Springmann:

> Is kolab2 ready for a daily usage

Kolab 2 is in development and not released sofar though many are running the 
developement versions in production environments. You milage may vary....

> features are already implemented? Are there any plans for a release this
> year? I've read somewhere that kolab2 is done in 2004?!

If everything goes well I expect some kind of release at the end of the year.

> Can we use the kontact version that comes with KDE 3.3.0 (Debian/Sid) or do
> we have to compile kontact from cvs head? If we have to use kontact from
> head, are there any debian packages out there (or at least a little howto
> for compiling kontact from head?)

For full Kolab 2 features you require the Proko2 branch of the kdepim package.

> set up kontact to work with kolab2 (actually I just tried it a few
> minutes...)

Please expect a bigger effort than a few minutes...

Regards.
-- martin

"I am committed to helping Ohio deliver its electoral votes to the
President next year."  -- Wally O'Dell - CEO of Diebold, Inc. 
e r f r a k o n
(Continue reading)

Timo Springmann | 3 Nov 22:39 2004
Picon

Re: Questions about using kolab2 and kontact

On Mittwoch 03 November 2004 22:21, Martin Konold wrote:
> Am Freitag, 29. Oktober 2004 10:09 schrieb Timo Springmann:
> > Is kolab2 ready for a daily usage
>
> Kolab 2 is in development and not released sofar though many are running
> the developement versions in production environments. You milage may
> vary....

This sounds promising.

> For full Kolab 2 features you require the Proko2 branch of the kdepim
> package.

I already read that somewhere. I just tried to build some debian packages from 
kde_3_3_branch with proko2 patches last weekend, but I didn't get it to work. 
The problem is, that I'm no developer, just someone who tries to validated 
some groupware solutions for internal use (and of course for selling to 
customers).

> > set up kontact to work with kolab2 (actually I just tried it a few
> > minutes...)
>
> Please expect a bigger effort than a few minutes...

Yes, I know. I just wanted to tell that I hadn't the time to take a deeper 
look into the kontact integration... 

Anyway, thanks for the answers. I'll keep trying :)
Timo
(Continue reading)

Martin Konold | 3 Nov 22:50 2004
Picon

Re: Questions about using kolab2 and kontact

Am Mittwoch, 3. November 2004 22:39 schrieb Timo Springmann:

Hi,

> I already read that somewhere. I just tried to build some debian packages
> from kde_3_3_branch with proko2 patches last weekend, but I didn't get it
> to work. 

FYI: Our customer uses a Debian Woody based KDE solution using a Proko2 
Kontact. I am mentioning this in order to assure you that it is doable though 
not trivial. Maybe you talk to some experienced KDE packager for Debian.

Regards,
-- martin

"I am committed to helping Ohio deliver its electoral votes to the
President next year."  -- Wally O'Dell - CEO of Diebold, Inc. 
e r f r a k o n
Erlewein, Frank, Konold & Partner - Beratende Ingenieure und Physiker
Matt Douhan | 3 Nov 22:57 2004

Re: Questions about using kolab2 and kontact

On Wed November 3 2004 22.50, Martin Konold wrote:
> FYI: Our customer uses a Debian Woody based KDE solution using a Proko2
> Kontact. I am mentioning this in order to assure you that it is doable
> though not trivial. Maybe you talk to some experienced KDE packager for
> Debian.

Our customers use the same on FreeBSD 4-STABLE and on 5.* and myself run it on 
6-CURRENT.

FreeBSD joins the club of doable systems :)

rgds

Matt

--

-- 
Matt Douhan
http://www.fruitsalad.org
severett | 3 Nov 23:29 2004

IMP Problems

Hi Guys,

For once I've actually managed to make some progress with Kolab.  I downloaded the Kolab RPMs from
Fruitsalad.org and installed them without problems. (Slackware 9.1 if anyone is curious)

Using a normal email client such as Mozilla Messenger I can create IMAP folders, send/receive email all
without any obvious errors.

Now for the problem.  I installed Horde from CVS following the instructions on the
Kolab.org/webclient.html page.  My first big problem is that when clicking on Mail to view mailboxes or to
create messages the Apache process spikes to 100% of the CPU and the error log gets filled with:

[Wed Nov  3 14:20:25 2004] [error] PHP Notice:  Undefined index:  delimiter in
/kolab/var/kolab/www/horde/imp/lib/Folder.php o
n line 205
[Wed Nov  3 14:20:25 2004] [error] PHP Warning:  implode(): Bad arguments. in
/kolab/var/kolab/www/horde/imp/lib/Folder.php on
 line 205
[Wed Nov  3 14:20:25 2004] [error] PHP Warning:  array_pop(): The argument should be an array in /kolab/var/kolab/www/horde/im
p/lib/Folder.php on line 220

This keeps happening until I stop and start the Apache service.

The version of Folder.php that I have is 1.130

Thoughts or ideas are apreciated.

Shawn
Julio Saura | 4 Nov 12:21 2004
Picon

imap problem?

Hi!

I have just installed a fresh kolab ( version kolab-20040503-2.1.0 )
using zfos obmtool.. 

the installation goes really well and after finished i am able to access
admin interface and create/modify users, services etc etc

my problem is related to accesing kolab server using toltec connector..

when creating the connection the test part of toltec says that it is
unable to connect to imap4 server ...

i can see using tcpdumps ( sniffing the network ) how the client tryies
to connect, but no log appears on imapd logs at all ..

any clue? i guess my cyrus imapd server is not working propperly,, do i
need to touch any config file after the installation to make this work?

Thanks to all.
Best regards

--

-- 
Julio Saura Alejandre
Dpto Sistemas
DBS Servicios Informáticos
Centro Empresarial EL Trovador
Plaza Antonio Beltrán Martínez 1, Planta 7, oficina G
976 205 130
(Continue reading)

Luca Villani | 4 Nov 12:31 2004

Re: apache misconfiguration for webdav

Alle 22:18, mercoledì 3 novembre 2004, Martin Konold ha scritto:

> > Resolving this problem was easy: I simply put two correct ServerName
> > directives in httpd.conf.template, both for plain and ssl sections.
>
> Please provide a patch.

I'm sorry, but my httpd.conf.template is highly customied, I think a simple 
diff will not be useful... :-(
I simply put a

 Servername corp.wseurope.com

directive (literally), I don't know if there is a template macro for server 
FDQN... 

I'm planning to install a third server for testing in a few days, I will try 
to provide a patch.

BTW: kolab's apache seems to not use auth_ldap module for ldap authentication, 
can you tell me the name of the ldap authentication module?

--

-- 
Luca Villani                Wireless Solutions spa - DADA group
NOC manager                 Europe HQ, via Castiglione 25 Bologna
http://www.wseurope.com     Tel: +39 051 2966826    Fax: +39 051 2966800
GPG public key available    Mobile: +39 348 5298542 UIN: 76272621

Gmane