Ingo is an email filter rules manager for the Horde project ()

Brion Finlay | 2 Jan 2004 09:42

Ingo RELENG_1 installation

I followed the directions in the INSTALL directory to install ingo RELENG_1.

I am running Horde 2.2.4, Imp 3.2.2, php 4.3.4, Cyrus.

I have modified /.../horde/config/horde.php to add my username to the admins array:
$conf['auth']['admins'].  

My authentication driver is imap: $conf['auth']['driver'] = 'imap';

My prefs driver is sql - MySQL

Problem 1 is that when I login, I do not get the admin configuration screen that the ingo INSTALL
instructions describe, so I don't know if the ingo conf.php file is complete.

Problem 2 is that When I try to create a new filter (which I think is going to be stored with timsieved) I
receive the following error message:
Notice: Undefined index: edit in /usr/local/www/horde/ingo/rule.php on line 22

Can anybody help me solve either of these problems?

Denis V. Suhanov | 8 Jan 2004 07:44

Picon

ingo question

Hello,

I am having some strange problems with ingo. Maybe you guys will be
able to help.

I  have  HORDE  2.2.4  and  ingo  RELENG_1  set  up  for timsieved. My
timsieved  runs  locally  on  port  2000.  Ingo appears just fine, but
whenever  I  am  trying to add a rule and press "save", my horde stops
responding  (only  in  this  session).  The browsers says "Waiting for
www.example.com...")  and  I am unable to navigate on the page at all.
The  page  stays  there  forever,  no matter what horde links I try to
follow.  By  the  way,  if I just close the browser, the newly created
rule  stays  there (and the "script" tab in Ingo is modified according
to that rule). However, any attempts to activate that script brings me
to the same state (horde does not respond).

I know that sieve starts, here is the part of the log file:
Jan  7 22:36:50 square master[668]: about to exec /usr/local/cyrus/bin/timsieved
Jan  7 22:36:50 square sieve[668]: executed
Jan  7 22:36:50 square sieve[668]: accepted connection

but  if  I  use  sievshell,  there will be no differences in my active
sieve script.

If  at  the  same  time  one  tries  to  log  in to horde from another
computer, everything appears to be fine (except for ingo, of course).

Here  are  my  configuration  files  (I  must  admit that although the
documentation said "Log in as Horde administrator, I did not do that -
there  is  no  Horde  administrator  at  2.2.4  AFAIK  and created the

(Continue reading)

Jan Schneider | 8 Jan 2004 11:29

Re: ingo question

Zitat von "Denis V. Suhanov" <den@...>:

> Hello,
>
> I am having some strange problems with ingo. Maybe you guys will be
> able to help.
>
> I  have  HORDE  2.2.4  and  ingo  RELENG_1  set  up  for timsieved. My
> timsieved  runs  locally  on  port  2000.  Ingo appears just fine, but
> whenever  I  am  trying to add a rule and press "save", my horde stops
> responding  (only  in  this  session).  The browsers says "Waiting for
> www.example.com...")  and  I am unable to navigate on the page at all.
> The  page  stays  there  forever,  no matter what horde links I try to
> follow.  By  the  way,  if I just close the browser, the newly created
> rule  stays  there (and the "script" tab in Ingo is modified according
> to that rule). However, any attempts to activate that script brings me
> to the same state (horde does not respond).
>
> I know that sieve starts, here is the part of the log file:
> Jan  7 22:36:50 square master[668]: about to exec
> /usr/local/cyrus/bin/timsieved
> Jan  7 22:36:50 square sieve[668]: executed
> Jan  7 22:36:50 square sieve[668]: accepted connection

This is probably a bug in the Net_Sieve package:
http://pear.php.net/bugs/bug.php?id=159

Jan.

--

(Continue reading)

aoster | 15 Jan 2004 11:24

Picon

Problems with ingo-RELENG and timsieved


Dear list,

I have a problem getting ingo to work with my cyrus imap server
(2.1.15). I would like to have individual sieve filters for all of
our user. The Ingo frontend starts up and filters can be defined, 
but when I try to save them the complete Horde framework stops
responding.
When I check running processes i can see that timesievd has been
started.

my backends.php looks like this:

<?php

$backends['timsieved'] = array(
    'driver' => 'timsieved',
    'preferred' => 'webmail.mydomain.de',
    'script' => 'sieve',
    'hordeauth' => 'user',
    'params' => array('hostspec' => 'localhost','port' => 2000));

my conf.php looks like this:

<?php
// What storage driver should we use?
$conf['storage']['driver'] = 'prefs';

/**
 ** Ingo Scripts

(Continue reading)

Jan Schneider | 15 Jan 2004 11:40

Re: Problems with ingo-RELENG and timsieved

Zitat von aoster@...:

>
> Dear list,
>
> I have a problem getting ingo to work with my cyrus imap server
> (2.1.15). I would like to have individual sieve filters for all of
> our user. The Ingo frontend starts up and filters can be defined,
> but when I try to save them the complete Horde framework stops
> responding.
> When I check running processes i can see that timesievd has been
> started.

That's a known bug in the Net_Sieve PEAR package.

Jan.

--
http://www.horde.org - The Horde Project
http://www.ammma.de - Neue Wege des Lernens
http://www.tip4all.de - Deine private Tippgemeinschaft

aoster | 15 Jan 2004 12:06

Picon

Re: Problems with ingo-RELENG and timsieved


Dear Jan,

thanks for your fast response, but is there actually a solution?
I have searched the list and read that there is a bug but did not
find anything to solve this. If there is already a fix, could you
please point me to the thread/location where I can find it.

best regards

Andreas

Jan Schneider | 15 Jan 2004 13:10

Re: Problems with ingo-RELENG and timsieved

Zitat von aoster@...:

> thanks for your fast response, but is there actually a solution?

No.

> I have searched the list and read that there is a bug but did not
> find anything to solve this. If there is already a fix, could you
> please point me to the thread/location where I can find it.

Jan.

--
http://www.horde.org - The Horde Project
http://www.ammma.de - Neue Wege des Lernens
http://www.tip4all.de - Deine private Tippgemeinschaft

Mark | 15 Jan 2004 18:01

Picon

RE: Problems with ingo-RELENG and timsieved

Hi Jan,

I'm not sure if this is the same as the problem I encountered, where the
Net_Sieve PEAR package is failing to understand the 'bye' response from
the Cyrus timsieved program. If it is, I've attached a small patch
against the Net/Sieve.php file that corrects the problem, at least in
our case here.

Regards
Mark Wilkinson

-----Original Message-----
From: ingo-bounces@... [mailto:ingo-bounces@...]
On Behalf Of Jan Schneider
Sent: 15 January 2004 12:11
To: ingo@...
Subject: Re: [ingo] Problems with ingo-RELENG and timsieved

Zitat von aoster@...:

> thanks for your fast response, but is there actually a solution?

No.

> I have searched the list and read that there is a bug but did not
> find anything to solve this. If there is already a fix, could you
> please point me to the thread/location where I can find it.

Jan.

(Continue reading)

Jan Schneider | 15 Jan 2004 18:09

RE: Problems with ingo-RELENG and timsieved

Zitat von Mark <mark@...>:

> I'm not sure if this is the same as the problem I encountered, where the
> Net_Sieve PEAR package is failing to understand the 'bye' response from
> the Cyrus timsieved program. If it is, I've attached a small patch
> against the Net/Sieve.php file that corrects the problem, at least in
> our case here.

Unfortunately not. The problem is this:
http://pear.php.net/bugs/bug.php?id=159

You should also file a bug report about the "bye" issue and attach your
patch.

Jan.

--
http://www.horde.org - The Horde Project
http://www.ammma.de - Neue Wege des Lernens
http://www.tip4all.de - Deine private Tippgemeinschaft

Christian Tramnitz | 18 Jan 2004 22:43

Does ingo read existing scripts?

Hello,

I've been using sieve for a while now, writing simple sieve-scripts for 
~10 users on the command line.

Because I'm quite happy with Horde/IMP for Webmail purpose I thought I 
give Ingo a try.

Setup was very simple and lucky me, I do not suffer from the broken 
connection (PLAIN/bye) problem.
However when setting up my first script using ingo it didnt detect my 
existing scripts and when activating my changes it wrote the 
ingo-scripts to /var/imap/sieve, removing the "default" pointer from my 
existing scripts...

Is there a way to integrate existing scripts into Ingo? I dont want 
every user login and rebuild the rules that already exist...

I tried with manually editing the ingo.scripts file but that was caught 
either 

Thanks and best regards,
   Christian

Group

gmane.comp.horde.ingo.

Project Web Page

Ingo is an email filter rules manager for the Horde project ()

Search Archive

Page

1 | 2

Articles in period: 18

January 2004

Language

Change language

Options

Current view: Threads only / Showing only 20 lines / Not hiding cited text.
Change to All messages, whole messages, or hide cited text.

Post a message
NNTP Newsgroup
Classic Gmane web interface
XML

XML

RSS Feed
List Information

About Gmane

Recent entries

Sieve Filter doesn't work (8 Apr 2013)
ingo vacation procmail script problem (27 Mar 2013)
Ingo & Procmail (21 Mar 2013)
Ingo, Sieve and regular expressions (6 Feb 2013)
two sieve servers (30 Jan 2013)
Wrong auth with Sieve and Hooks (11 Jan 2013)
Ingo H5 (3.0.2) (final) (10 Jan 2013)
Wrong auth in Ingo with sieve-cyrus (7 Jan 2013)
import export filter rules (7 Jan 2013)
Ingo as a web service (23 Nov 2012)
Ingo H5 (3.0.0RC1) (27 Oct 2012)
Import rules from sieve scripts (26 Oct 2012)
ingo-beta vacation time( hourly) (14 Oct 2012)
Using IMP Auth in Ingo (27 Sep 2012)
Ingo unable to write new rules - 2 (25 Sep 2012)
Ingo unable to write new rules (20 Sep 2012)
Sieve script generation for full From header field (13 Sep 2012)
ISPConfig vacation support (7 Sep 2012)
Ingo Backend with Maildrop when virtual users are used (31 Aug 2012)
Vacation and other default rules not visible (21 Aug 2012)
Enabling default filter rules (17 Jul 2012)

Archives

11	April 2013
4	March 2013
12	February 2013
16	January 2013
4	November 2012
14	October 2012
16	September 2012
4	August 2012
5	July 2012
9	June 2012
7	May 2012
1	April 2012
2	February 2012
5	January 2012
12	December 2011
15	November 2011
3	October 2011
4	September 2011
19	August 2011
18	July 2011
13	June 2011
10	May 2011
16	April 2011
16	March 2011
2	February 2011
12	January 2011
2	December 2010
8	November 2010
2	October 2010
3	September 2010
6	August 2010
7	July 2010
2	June 2010
28	May 2010
14	April 2010
6	March 2010
5	February 2010
9	January 2010
49	December 2009
5	November 2009
30	October 2009
15	September 2009
11	August 2009
9	July 2009
20	June 2009
4	May 2009
1	April 2009
10	March 2009
11	February 2009
3	January 2009
4	December 2008
4	November 2008
15	October 2008
5	September 2008
20	August 2008
7	July 2008
29	June 2008
13	May 2008
21	April 2008
10	March 2008
28	February 2008
4	January 2008
15	December 2007
7	November 2007
16	October 2007
14	September 2007
25	August 2007
8	July 2007
7	June 2007
5	May 2007
11	April 2007
17	March 2007
16	February 2007
1	January 2007
16	December 2006
18	November 2006
22	October 2006
28	September 2006
21	August 2006
7	July 2006
24	June 2006
21	May 2006
31	April 2006
30	March 2006
38	February 2006
41	January 2006
16	December 2005
15	November 2005
11	October 2005
21	September 2005
24	August 2005
23	July 2005
25	June 2005
9	May 2005
29	April 2005
39	March 2005
19	February 2005
46	January 2005
9	December 2004
18	November 2004
2	October 2004
10	September 2004
21	August 2004
8	July 2004
14	June 2004
10	May 2004
26	April 2004
33	March 2004
5	February 2004
18	January 2004
16	December 2003
34	November 2003
36	October 2003
24	September 2003
39	August 2003
63	July 2003
102	June 2003
46	May 2003
101	April 2003
5	March 2003
19	February 2003
10	January 2003
10	December 2002
7	November 2002
11	October 2002
12	September 2002

Design

Zawodny | Right Menu | Left Menu

Your Own Design

Paste the URL of your CSS below. Download CSS template