Steffen Moeller | 1 Dec 01:13 2009
Picon
Picon

Re: debian install.sh for openmoko fdisk error "got EOF thrice - exiting.."

Charles Tabor wrote:
> The debian install.sh script would stop after partitioning the memory
> card with this error:
> 
> got EOF thrice - exiting..
> 
> Noticed that it was the fdisk causing the error. Believe this was
> because the piped output of the "echo pq" command requires a newline
> character between the p and q. I don't know if this is unique to SHR,
> busybox or fdisk -> fdisk.util-linux-ng.
> The script continues on when all instances of:
> 
> echo pq
> 
> are change to:
> 
> echo -e "p\nq"

Hi Charles, this makes some good sense to me.
I have just uploaded the change.

Thanks

Steffen
Jonathan Schultz | 1 Dec 02:00 2009

Re: How to use fso-usaged?

> The latest version has been in use by SHR for quite a while now and
> seems pretty stable.

Yes and it works well for me too so far.  The only problem is this is 
the first I've heard about it.  Would it be possible for 
fso-config-gta02 to be kept updated?

Jonathan
Timo Jyrinki | 1 Dec 07:33 2009
Picon

Re: How to use fso-usaged?

2009/11/30 Gilles Filippini <gilles.filippini <at> free.fr>:
>>> [fsousage]
>>> lowlevel_type = openmoko
>>>
>>> [fsousage.lowlevel_openmoko]
>>> [fsousage.dbus_service]
>
> It works fine this way.

Likewise, though required starting Zhone twice since the first round
gave "couldn't get authentication" or something, ie. didn't ask for
PIN code.

Some documentation wouldn't hurt, but at least those lines can be now
mentioned in the wikis. I guess ousaged was at least one with known
problems so it's good fsousaged is possible to be used instead. Was it
ousaged that caused the "backlight doesn't react to touch events
anymore" bug? I haven't had actually any other real problems in the
last months with Debian.

-Timo
Sebastian Reichel | 1 Dec 11:28 2009
Picon

Re: How to use fso-usaged?

On Tue, Dec 01, 2009 at 12:00:57PM +1100, Jonathan Schultz wrote:
> >The latest version has been in use by SHR for quite a while now and
> >seems pretty stable.
> 
> Yes and it works well for me too so far.  The only problem is this
> is the first I've heard about it.  Would it be possible for
> fso-config-gta02 to be kept updated?
> 
> Jonathan

It will be included in the next fso-config package. I will upload a
new version to pkg-fso repository today. I will be asking for
sponsoring once you tell me the new package is working :)

-- Sebastian
_______________________________________________
Smartphones-userland mailing list
Smartphones-userland <at> linuxtogo.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/smartphones-userland
Neil Jerram | 1 Dec 14:07 2009

Re: debian install.sh for openmoko fdisk error "got EOF thrice - exiting.."

2009/12/1 Steffen Moeller <steffen_moeller <at> gmx.de>:
>
> Hi Charles, this makes some good sense to me.
> I have just uploaded the change.

As you're uploading install.sh changes, please could I draw your
attention to http://lists.alioth.debian.org/pipermail/pkg-fso-maint/2009-October/002106.html
?  This is a patch that I sent some time ago for the empty
frameworkd.conf problem, and I think it was missed.

Regards,
         Neil
Sebastian Reichel | 1 Dec 14:19 2009
Picon

Re: How to use fso-usaged?

On Tue, Dec 01, 2009 at 11:28:19AM +0100, Sebastian Reichel wrote:
> On Tue, Dec 01, 2009 at 12:00:57PM +1100, Jonathan Schultz wrote:
> > >The latest version has been in use by SHR for quite a while now and
> > >seems pretty stable.
> > 
> > Yes and it works well for me too so far.  The only problem is this
> > is the first I've heard about it.  Would it be possible for
> > fso-config-gta02 to be kept updated?
> > 
> > Jonathan
> 
> It will be included in the next fso-config package. I will upload a
> new version to pkg-fso repository today. I will be asking for
> sponsoring once you tell me the new package is working :)
> 
> -- Sebastian

I just uploaded a new package to pkg-fso. Please tell me if it's
working for you, so that it can be reviewed by nikita and uploaded
to Debian main.

-- Sebastian
_______________________________________________
Smartphones-userland mailing list
Smartphones-userland <at> linuxtogo.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/smartphones-userland
A.A. | 2 Dec 12:42 2009
Picon

bluez-alsa debian sid openmoko

Hi,

I have installed bluez-alsa with apt-get install bluez-alsa on my freerunner.

cat .asoundrc
pcm.bluetooth {
   type bluetooth
   device 00:1A:7D:02:AB:2F
#   profile "hifi"
}

when I try to run mplayer:
mplayer -ao alsa:device=bluetooth Multimedia/music/Franco\ Battiato\ -\ Come\ un\ cammello\ in\ una\ grondaia.mp3
MPlayer SVN-r29142-4.3.3 (C) 2000-2009 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.

Playing Multimedia/music/Franco Battiato - Come un cammello in una grondaia.mp3.
Audio only file format detected.
==========================================================================
Trying to force audio codec driver family ffmpeg...
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 44100 Hz, 2 ch, s16le, 192.0 kbit/13.61% (ratio: 24000->176400)
Selected audio codec: [ffmp3] afm: ffmpeg (FFmpeg MPEG layer-3 audio)
==========================================================================
[AO_ALSA] alsa-lib: pcm_bluetooth.c:1607:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5)
[AO_ALSA] Playback open error: Input/output error
Failed to initialize audio driver 'alsa:device=bluetooth'
Could not open/initialize audio device -> no sound.
Audio: no sound
Video: no video


Exiting... (End of file)
Inconsistency detected by ld.so: dl-close.c: 731: _dl_close: Assertion `map->l_init_called' failed!

The same headset works fine on my computer with debian sid.. why?


--
A.A.

_______________________________________________
Smartphones-userland mailing list
Smartphones-userland <at> linuxtogo.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/smartphones-userland
Nikita V. Youshchenko | 2 Dec 13:37 2009
Picon

Re: bluez-alsa debian sid openmoko

> Hi,
>
> I have installed bluez-alsa with apt-get install bluez-alsa on my
> freerunner.
>
> cat .asoundrc
> pcm.bluetooth {
>    type bluetooth
>    device 00:1A:7D:02:AB:2F
>
> ...
>
> The same headset works fine on my computer with debian sid.. why?

Have you paired headset with freerunner?
Nicola Mfb | 2 Dec 13:57 2009
Picon

CPU Resource Policy (FSO1.0)

Hi!
Is setting CPU Resource policy to enabled allowed?

mdbus -s org.freesmartphone.ousaged /org/freesmartphone/Usage
org.freesmartphone.Usage.SetResourcePolicy CPU enabled

results in:

Traceback (most recent call last):
  File "/usr/lib/python2.6/site-packages/framework/helpers.py", line
74, in exceptionlogger
    return f( *args, **kw )
  File "/usr/lib/python2.6/site-packages/framework/resource.py", line
212, in onProcessElement
    self._enable( ok, err )
  File "/usr/lib/python2.6/site-packages/framework/subsystems/odeviced/idlenotifier.py",
line 222, in _enable
    IdleNotifier.instance().prohibitStateTransitionTo( "suspend" )
  File "/usr/lib/python2.6/site-packages/framework/subsystems/odeviced/idlenotifier.py",
line 104, in prohibitStateTransitionTo
    self.allowedStates.remove( state )
KeyError: 'suspend'
2009.12.02 13:51:41.812 mppl.asyncworker     ERROR    exception while
processing element ('enable', <function <lambda> at 0x7a06f0>,
<function <lambda> at 0x2dc4f0>):

Regards

     Niko
Steven Jones | 2 Dec 20:10 2009

FreeRunner opkg update

New FreeRunner with networking established using "The more advanced way" 
at wiki.openmoko.org/wiki/USB_Networking.
I can ssh into the phone, have copied the DNS addresses into the phone, 
and can ping internet addresses, but I have two issues:
-opkg update fails:
> root <at> om-gta02:~# opkg update
> Downloading http://buildhost.openmoko.org/daily-feed/all/Packages.gz
> Downloading http://buildhost.openmoko.org/daily-feed/all/Packages.sig
> Signature check failed
> Downloading http://buildhost.openmoko.org/daily-feed/armv4t/Packages.gz
> Downloading http://buildhost.openmoko.org/daily-feed/armv4t/Packages.sig
> Signature check failed
> Downloading http://buildhost.openmoko.org/daily-feed/neo1973/Packages.gz
> Downloading http://buildhost.openmoko.org/daily-feed/neo1973/Packages.sig
> Signature check failed
> Downloading http://buildhost.openmoko.org/daily-feed/om-gta02/Packages.gz
> Downloading http://buildhost.openmoko.org/daily-feed/om-gta02/Packages.sig
> Signature check failed
> An error ocurred, return value: 8.
> Collected errors:
> Failed to download http://buildhost.openmoko.org/daily-feed/all/Packages.gz, error 404
> Failed to download http://buildhost.openmoko.org/daily-feed/all/Packages.sig, error 404
> Failed to download http://buildhost.openmoko.org/daily-feed/armv4t/Packages.gz, error 404
> Failed to download http://buildhost.openmoko.org/daily-feed/armv4t/Packages.sig, error 404
> Failed to download http://buildhost.openmoko.org/daily-feed/neo1973/Packages.gz, error 404
> Failed to download http://buildhost.openmoko.org/daily-feed/neo1973/Packages.sig, error 404
> Failed to download http://buildhost.openmoko.org/daily-feed/om-gta02/Packages.gz, error 404
> Failed to download http://buildhost.openmoko.org/daily-feed/om-gta02/Packages.sig, error 404
> root <at> om-gta02:~#

-opkg install perl fails
> root <at> om-gta02:~# opkg install perl
> Nothing to be done
> An error ocurred, return value: 4.
> Collected errors:
> Cannot find package perl.
> Check the spelling or perhaps run 'opkg update'
> root <at> om-gta02:~#

My goal is to get Debian installed, as I was unsuccessful with that 
endeavor on my Neo1973. I was hoping this would be a smoother effort, 
but I am stuck on this (very early) hurdle.

Thank you in advance.

Gmane