Would the ITG-3200 be compatible with this driver for the MPU-3050? https://patchwork.kernel.org/patch/689771/ -- View this message in context: http://openmoko-public-mailinglists.1958.n2.nabble.com/ITG-3200-MPU-3050-tp6337093p6337093.html Sent from the Openmoko Hardware mailing list archive at Nabble.com.
|
Ciao, |
|
||||
L'iscrizione a XING è gratuita e richiede solo pochi minuti. |
|||||
| Se sei già utente XING, è sufficiente salvare nel tuo profilo l'indirizzo e-mail al quale questo invito è stato inviato e non riceverai più inviti a iscriverti a XING. | |||||
| Non desidero più ricevere inviti per XING © XING AG http://www.xing.com | |||||
_______________________________________________ hardware mailing list hardware <at> lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/hardware
hello list, while investigating my SD card issue i discovered that the R75707 resistor is missing [broken off] in an attempt to assess the situation i started to remove the LCD component to see the resistors connection on the opposite side of the board. while doing this i managed to snap off the mini usb connection. the crack looks very clean, im wondering if these were simply glued on somehow... you know... with conductive glue.... ? anyhow is there anyone that can help me fix all this crap or should i just go an jump ship at this point?
Hi Ali, I am interested in your device. What´s that reduced price?
Thx.
D
Send hardware mailing list submissions to
hardware <at> lists.openmoko.org
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.openmoko.org/mailman/listinfo/hardware
or, via email, send a message with subject or body 'help' to
hardware-request <at> lists.openmoko.org
You can reach the person managing the list at
hardware-owner <at> lists.openmoko.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of hardware digest..."
Today's Topics:
1. Freerunner for sale (Ali)
----------------------------------------------------------------------
Message: 1
Date: Wed, 26 May 2010 05:19:03 -0700 (PDT)
From: Ali <yaqoobali007 <at> gmail.com>
Subject: Freerunner for sale
To: hardware <at> lists.openmoko.org
Message-ID: <1274876343958-5103148.post <at> n2.nabble.com>
Content-Type: text/plain; charset=UTF-8
Hi,
I have openmoko free runner + debug board which i am not using in mint
condition . it is for sale at reduced price .
Please contact me if you guys are interested . I am in India.
Cheers,
AYS
-----
---------------------------------------------
._________. |
?/ ////______l Syed Yaqoob Ali |
) /_(_) |
/__/ |
---------------------------------------------
--
View this message in context: http://openmoko-public-mailinglists.1958.n2.nabble.com/Freerunner-for-sale-tp5103148p5103148.html
Sent from the Openmoko Hardware mailing list archive at Nabble.com.
------------------------------
_______________________________________________
hardware mailing list
hardware <at> lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/hardware
End of hardware Digest, Vol 24, Issue 2
***************************************
_______________________________________________ hardware mailing list hardware <at> lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/hardware
Hi, I have openmoko free runner + debug board which i am not using in mint condition . it is for sale at reduced price . Please contact me if you guys are interested . I am in India. Cheers, AYS ----- --------------------------------------------- ._________. | £/ ////______l Syed Yaqoob Ali | ) /_(_) | /__/ | --------------------------------------------- -- -- View this message in context: http://openmoko-public-mailinglists.1958.n2.nabble.com/Freerunner-for-sale-tp5103148p5103148.html Sent from the Openmoko Hardware mailing list archive at Nabble.com. _______________________________________________ hardware mailing list hardware <at> lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/hardware
http://sites.google.com/site/g4f5gv5ge/dwkf7b
when i try access to doc link, firefox and konqueror say me, invalid certified for this cite. i lost my account in hardware list openmoko, can you send me for retype the pass and user name?.
thanks for your time.
Send hardware mailing list submissions to
hardware <at> lists.openmoko.org
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.openmoko.org/mailman/listinfo/hardware
or, via email, send a message with subject or body 'help' to
hardware-request <at> lists.openmoko.org
You can reach the person managing the list at
hardware-owner <at> lists.openmoko.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of hardware digest..."
Today's Topics:
1. Openmoko Bug #2335: GSM buzz on FreeRunner A7 (seven)
(Openmoko Public Trac)
----------------------------------------------------------------------
Message: 1
Date: Thu, 01 Apr 2010 18:31:53 -0000
From: "Openmoko Public Trac" <bugs <at> docs.openmoko.org>
Subject: Openmoko Bug #2335: GSM buzz on FreeRunner A7 (seven)
Cc: buglog <at> lists.openmoko.org
Message-ID: <052.230549390ee33f1ac76def32a77b728d <at> docs.openmoko.org>
Content-Type: text/plain; charset="utf-8"
#2335: GSM buzz on FreeRunner A7 (seven)
------------------------+---------------------------------------------------
Reporter: blindcoder | Owner: hardware
Type: defect | Status: new
Priority: normal | Milestone:
Component: hardware | Version:
Severity: major | Keywords: A7 gsm buzz capacitor
Haspatch: 0 | Blockedby:
Estimated: | Patchreview:
Blocking: | Reproducible:
------------------------+---------------------------------------------------
There is a lot of GSM buzz on the FR A7 (recording attached).
I was trying the capacitor next to the microphone with a multimeter:
black cable to ground, red cable to right (close-to-mic) side with audible
resistance checker gives signal (short circuit), but when applying a bit
of force on red cable (connected to capacitor), audio signal stops,
indicating loss of connection on the capacitor.
Resoldering the capacitor gives way better audio quality on remote side
(person I'm calling).
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/2335>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
------------------------------
_______________________________________________
hardware mailing list
hardware <at> lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/hardware
End of hardware Digest, Vol 23, Issue 1
***************************************
_______________________________________________ hardware mailing list hardware <at> lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/hardware
#2335: GSM buzz on FreeRunner A7 (seven)
------------------------+---------------------------------------------------
Reporter: blindcoder | Owner: hardware
Type: defect | Status: new
Priority: normal | Milestone:
Component: hardware | Version:
Severity: major | Keywords: A7 gsm buzz capacitor
Haspatch: 0 | Blockedby:
Estimated: | Patchreview:
Blocking: | Reproducible:
------------------------+---------------------------------------------------
There is a lot of GSM buzz on the FR A7 (recording attached).
I was trying the capacitor next to the microphone with a multimeter:
black cable to ground, red cable to right (close-to-mic) side with audible
resistance checker gives signal (short circuit), but when applying a bit
of force on red cable (connected to capacitor), audio signal stops,
indicating loss of connection on the capacitor.
Resoldering the capacitor gives way better audio quality on remote side
(person I'm calling).
--
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/2335>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
There is a cheap Android smartphone on the market ------- Processor: Samsung S3C2448 400Mhz ·Operating system: Google Android ·Network: GSM900/DCS1800 or GSM850/DCS1900, GPRS Class 10 ·Display: 2.8” TFT-LCD with QVGA (320x240) flat touch-sensitive screen ·Camera: 2.0-mega-piexel CMOS ·Memory: 128MB(ROM), 128MB(RAM), 1GB microSD? memory card(up to 8GB) ·Connectivity: Bluetooth, Wi-Fi 802.11b/g ------- http://www.jiongtang.com/shop/sciphone-n19-android-400mhz-cpu-2mp-camera-wifi-bluetooth-p-101.html at least it is told to be readily usable phone and it costs much less than $500 that FreeRunner would cost in Russiaunbranded it seems to be Beyond-Radio.com one http://www.clonedinchina.com/2009/07/chinas-first-android-phone-comes-out-from-beyond-radio-tech.html the problem is that chinese cheap goods comes with no after-sale support, no updates, etc so if unofficial self-contained firmware project can be made - the phone definetly is interesting to buy If not, if "take what we made and bear with it" - then it is not insteresting thing, though it's a pity Alas, SciPhones sales manager knows nothign about software and developers (or at least are ordered to tell so) Alas, Beyond-Radio e-mail is dead And here comes the surprise - http://forum.xda-developers.com/archive/index.php/t-579098.html Some code is taken/derives from neo1973 What might it seems ? * the person, who ported Android onto that phone was one of Moko hackers and put his experience with Moko code inside ? Maybe you know him ? * that is common case of code exchanges between Android and Moko and means nothing ? * that phone just has [mostly] the same hardware as Neo1973 ? I wonder if you know any clues to unbox the firmware (currently some bootloaders told to work, some not, so at least there are sailing the phone with two different versions of firmware) and easier make custom android upgrades (bootlloader, drivers, upgrade/recovery methods). I wonder if that phone may potentialyl be some fun for you to port OpenMoko to
-- -- Написано в почтовом клиенте браузера Opera: http://www.opera.com/mail/ _______________________________________________ hardware mailing list hardware <at> lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/hardware
Hi, Is it possible to blink the FR's LED's (red/orange/blue - any / either) while the phone is in suspend? I'm looking at this as a method to indicate to the user that some notification needs his attn (missed call/sms/task etc) while the phone is suspended. Can the vibrator / audio system be used while in suspend? Thanks. -- -- View this message in context: http://n2.nabble.com/LED-blinking-during-suspend-tp4174042p4174042.html Sent from the Openmoko Hardware mailing list archive at Nabble.com.
 |
|
|
|
|
|
|
| Mon | Tue | Wed | Thu | Fri | Sat | Sun |
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | |
| 7 | 8 | 9 | 10 | 11 | 12 | 13 |
| 14 | 15 | 16 | 17 | 18 | 19 | 20 |
| 21 | 22 | 23 | 24 | 25 | 26 | 27 |
| 28 | 29 | 30 | 31 |
RSS Feed2 | |
|---|---|
7 | |
5 | |
3 | |
3 | |
1 | |
10 | |
9 | |
27 | |
8 | |
27 | |
5 | |
40 | |
54 | |
54 | |
46 | |
89 | |
76 | |
55 | |
60 | |
109 | |
149 | |
240 | |
73 | |
9 | |
77 | |
53 |