Re: adding a define to sane.h

Le Thursday 25 September 2008 22:01:35 stef, vous avez écrit :
> 	Hello,
>
> 	there is a SANE_CURRENT_MAJOR defined. To ease the compilation of
> frontends outside SANE tree, how about adding a SANE_CURRENT_MINOR define ?
> Fronted could then handle compiling against SANE 1.0 or SANE 1.1
>
> Regards,
> 	Stef

	Hello,

	in fact there is a SANE_DLL_V_MINOR. It is enough for my needs.

Regards,
	Stef

--

-- 
sane-devel mailing list: sane-devel <at> lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
             to sane-devel-request <at> lists.alioth.debian.org

Fujitsu fi-5120c: replaced by fi-6130?

I noticed today that the Fujitsu fi-5120c was no longer listed at our
preferred online retailer. A new model fi-6130 was available with slightly
better specifications and a correspondingly higher price.

Is the Fujitsu fi-6130 a direct replacement for the fi-5120c?

Can anyone verify that the fi-6130 carries the same high level of sane
fujitsu-backend compatibility as the fi-5120c?

Thanks,
Jeff

--

-- 
sane-devel mailing list: sane-devel <at> lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
             to sane-devel-request <at> lists.alioth.debian.org

Re: Fujitsu fi-5120c: replaced by fi-6130?

On Wed, Oct 1, 2008 at 8:38 AM, Jeff Kowalczyk <jtk <at> yahoo.com> wrote:
> I noticed today that the Fujitsu fi-5120c was no longer listed at our
> preferred online retailer. A new model fi-6130 was available with slightly
> better specifications and a correspondingly higher price.
>
> Is the Fujitsu fi-6130 a direct replacement for the fi-5120c?

have one on my desk. very nice piece of gear, very fast, reversing
roller system makes it almost impossible to jam.

>
> Can anyone verify that the fi-6130 carries the same high level of sane
> fujitsu-backend compatibility as the fi-5120c?
>

works perfectly with sane cvs, poorly with 1.0.19. debian's latest
1.0.19 deb has a patch that gives basic support.

sane cvs also enables every esoteric option i could find, including
the endorser (if you get one).

allan
-- 
"The truth is an offense, but not a sin"

--

-- 
sane-devel mailing list: sane-devel <at> lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
             to sane-devel-request <at> lists.alioth.debian.org

Re: Fujitsu fi-5120c: replaced by fi-6130?

On Wed, 01 Oct 2008 09:10:04 -0400, m. allan noah wrote:
> works perfectly with sane cvs, poorly with 1.0.19. debian's latest 1.0.19
> deb has a patch that gives basic support.
> 
> sane cvs also enables every esoteric option i could find, including the
> endorser (if you get one).

Is there a source for sane-cvs debs suitable for Ubuntu 8.04 Hardy?

I'd like to use our fi-60f (double-free error, ubuntu memory
'protection'), and if we are fortunate enough get one of these fi-6130,
neither Hardy or Intrepid sane packages are recent enough for full support.

--

-- 
sane-devel mailing list: sane-devel <at> lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
             to sane-devel-request <at> lists.alioth.debian.org

saned, Network Scanner, Automatic Document Feeder

I have configured a Canon PIXMA MX 310 (Printer/Scanner/FAX) on a Debian 
Etch server. SANE version is  1.1.0-cvs from 2008-09-30.

When I try to scan multiple pages using the Automatic Document Feeder 
the jobs fails after the first page with the following error:

scanimage: sane_start: Invalid argument

Scanning single pages works with ADF as well as Flatbed and multiple 
pages works with Flatbed. scanimage on the server itself works when 
scanning from the local scanner, when trying to scan from net even on 
the server itself, the same error occurs.

This is the output from debug whe scanning over the network:

....
....
....
scanimage: min/max graylevel value = 36/255
scanimage: read 26267904 bytes in total
Scanned page 1. (scanner status = 5)
Scanning page 2
[dll] sane_start(handle=0x8090248)
scanimage: sane_start: Invalid argument
[dll] sane_cancel(handle=0x8090248)
[dll] sane_close(handle=0x8090248)
[dll] sane_exit: exiting
....
....

multifuncional HP Deskjet F2180

Hi!

I succesfuly compiled and installed Sane backends on nice small Linux 
machine Bubba. That is personal mini server without any connectors for 
monitor, keyboard and mouse. The only access is trought SSH or web 
interfaces. Contains some good sevices like media server, ftp, print server, 
samba etc.
I have managed to work on them my HP Deskjet F2180 multifuncional printer.
But of course I would like to use his scanning abilities too - i.e. use it 
like network scanner.

So where I am now:

scanimage -L
gives me "No scanners were identified..."

while
sane-find-scanner
gives:
found USB scanner (vendor=0x03f0 [HP], product=0x7d04 [Deskjet F2100 
series]) at libusb:001:010

cat /proc/bus/usb/devices
shows:
T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 10 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=03f0 ProdID=7d04 Rev= 1.00
S:  Manufacturer=HP
S:  Product=Deskjet F2100 series
S:  SerialNumber=CN7954Q1SN04TK

[Patch] support a fixed port-range for saned

Hi,

I've written a small patch for adding support for specifying a range (by 
defining the constants(*) MINPORT_DATA and MAXPORT_DATA).

* This is the first step. Second step would be adding a real configuration 
option for net.conf.
** When set to zero, the old behaviour is used (pick a random port for data).

A strict firewall is common nowadays, even inside a LAN. I believe this 
feature is needed by many people. Please send feedback if something is wrong.

Attached.

Thanks,

 - Oren

--

-- 
sane-devel mailing list: sane-devel <at> lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
             to sane-devel-request <at> lists.alioth.debian.org

Re: saned, Network Scanner, Automatic Document Feeder

Nicolas

First of all, thanks for your quick answer. Unfortunately 
SANE_DEBUG_PIXMA gave absolutely no about at all. I then started scaned 
from the console with option -d128.

This is the output I got:

kangaroo:~# saned -d128
[saned] main: starting debug mode (level 128)
[saned] saned (AF-indep+IPv6) from sane-backends 1.1.0-cvs starting up
[saned] do_bindings: trying to get port for service "sane-port" 
(getaddrinfo)
[saned] do_bindings: [0] socket () using IPv4
[saned] do_bindings: [0] setsockopt ()
[saned] do_bindings: [0] bind () to port 6566
[saned] do_bindings: [0] listen ()
[saned] do_bindings: [1] socket () using IPv6
[saned] do_bindings: [1] socket failed: Address family not supported by 
protocol
[saned] run_standalone: waiting for control connection
[saned] handle_connection: processing client connection
[saned] check_host: access by remote host: 192.168.9.52
[saned] check_host: remote host is not IN_LOOPBACK nor IN6_LOOPBACK
[saned] check_host: local hostname: kangaroo
[saned] check_host: local hostname(s) (from DNS): kangaroo.pyramid.lan
[saned] check_host: local hostname(s) (from DNS): (null)
[saned] check_host: local hostname(s) (from DNS): (null)
[saned] check_host: remote host doesn't have same addr as local
[saned] check_host: opening config file: /etc/hosts.equiv

Re: [Patch] support a fixed port-range for saned

Oren Held <oren <at> held.org.il> wrote:

Hi,

> I've written a small patch for adding support for specifying a range (by 
> defining the constants(*) MINPORT_DATA and MAXPORT_DATA).

Make that two options in saned.conf and it'll have a chance.

JB.

-- 
Julien BLACHE                                   <http://www.jblache.org> 
<jb <at> jblache.org>                                  GPG KeyID 0xF5D65169

--

-- 
sane-devel mailing list: sane-devel <at> lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
             to sane-devel-request <at> lists.alioth.debian.org

Re: problems with genesys and MD6228

Le Friday 26 September 2008 01:38:17 Werner Holtfreter, vous avez écrit :
> Hallo stef,
>
> am Freitag, 2008-08-29 07:13:37 schrieben Sie:
> > 	I have committed a couple a GPO fixes. I have also commented out
> > ASIC reset for GL646. I don't think it is usefull, and suppose it
> > may mess things. Could you try latest CVS version to see if it
> > fixes things for you ?
>
> The result:
>
> 1. The starting point at the top of page is more constant. It varies
>    between 0...0,8 mm at the top. (O...0,8 mm loss. Earlier 8 mm!)
>
> 2. In most resolutions the scanner works properly.
>    Only with 100 dpi, gray, sometimes (30 % from tests) the scanner
>    head starts to shake and does not move properly! The old problem.

	Hello,

	I can reproduce the bug in version starting at 1.0.17. Since it is working 
with xsane/xscanimage, but not using scanimage I'll try to compre the 
execution path to understand what could be happening.

Regards,
	Stef

--

-- 
sane-devel mailing list: sane-devel <at> lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/sane-devel