cgi-mailer | 1 Jan 22:46 2008
Picon

Formulardaten


===========================================
== Neuer Eintrag
===========================================

      
-------------------------------------------
-- Formular: 'adddev'
-------------------------------------------

1. Your email address:
   'guillaume.gastebois <at> free.fr'
2. Manufacturer (e.g. "Mustek"):
   'Canon'
3. Model name (e.g. ScanExpress 1200UB):
   'PIXMA MP110'
4. Bus type:
   'USB'
5. Vendor id (e.g. 0x001):
   '0x04a9'
6. Product id (e.g. 0x0002):
   '0x1700'
7. Chipset (e.g. lm9831):
   ' OASIS OA 1000 010E IA0515'
8. Comments (e.g. similar to Mustek 1234):
   'Other ICs:

29LV800BE 90PETN 0516 F36 E1,
SM64M164TV-7 0521,
TBG2207BFG,
(Continue reading)

Julien Michielsen | 2 Jan 10:10 2008
Picon
Picon

Re: How to define xsane printer

Oliver Rauch wrote:
> You have to enter the command line option with which you can print a
> file. On most systems this is "lp" or "lpr".
> If you want to specify a special printer (if you have more than one or
> no default printer) then you have to add the correct option, e.g.
> 
> lpr -P laserjet
> 
> I don`t know what command line option your system offers, thats
> something that you have to find out.

So I did, and I'll give the the details for the others who'd like to
accomplish the same.
Started yast2, the Suse configuration tool, and clicked on hardware.
Subsequently I clicked printer, and this opens a new panel with one line
showing among others
Que name   	Model  .....
ml1610		Samsung/Ml1610

so I edited the general command you displayed above into
lpr -P ml1610

And likewise every SuSE-user can use the lpr command for his particular
printer.
Thanks, Oliver

> Best regards
> Oliver
> 
> Am Montag, den 24.12.2007, 09:21 +0100 schrieb Julien Michielsen:
(Continue reading)

Ralf Haueisen | 2 Jan 18:32 2008
Picon

Re: Canon LiDE 90

Hi Guillaume.

Maybe your forgot to change  /etc/sane.d/genesys.conf:

# genesys.conf: Configuration file for Genesys Logic GL646 and GL841 based scanners

#
# scanners that are not yet supported
# uncomment them only for developpment purpose
#

# UMAX Astra 4500 and Avision iVina 1600
#usb 0x0638 0x0a10

# Hewlett Packard ScanJet 2400c
#usb 0x03f0 0x0a01

# Hewlett Packard ScanJet 3670c
#usb 0x03f0 0x1405

# Plustek OpticPro ST24
#usb 0x07b3 0x0601

#
# supported scanners
#

# Medion MD5345/MD6228/MD6471
usb 0x0461 0x0377

(Continue reading)

Nick Urbanik | 2 Jan 21:49 2008

saned: Permission problem on Fedora 8, Deskjet_F300_series all-in-one

Dear Folks,

I am having problems setting up saned on Fedora 8:
$ grep sane /var/log/rpmpkgs
libsane-hpaio-2.7.7-6.fc8.i386.rpm
sane-backends-1.0.18-17.fc8.i386.rpm
sane-backends-devel-1.0.18-17.fc8.i386.rpm
sane-backends-libs-1.0.18-17.fc8.i386.rpm
sane-frontends-1.0.14-3.fc7.i386.rpm
xsane-0.994-4.fc8.i386.rpm
xsane-gimp-0.994-4.fc8.i386.rpm

I've created user and group saned.
$ grep saned /etc/passwd
saned:x:1020:1021:User to run saned scanner daemon only:/:/sbin/nologin

When I do:
$ sudo -u saned sane-find-scanner |grep ^found
found USB scanner (vendor=0x03f0, product=0x5511) at libusb:003:004
However, as myself, we also get the model information:
$ sane-find-scanner |grep ^found
found USB scanner (vendor=0x03f0 [HP], product=0x5511 [Deskjet F300 series]) at
+libusb:003:004
$ scanimage -L
device `hpaio:/usb/Deskjet_F300_series?serial=CN72FGM1CB04KH' is a Hewlett-Packard
Deskjet_F300_series all-in-one
And as the saned user, we get no biscuit:
$ sudo -u saned scanimage -L

No scanners were identified.
(Continue reading)

Guillaume Gastebois | 2 Jan 23:26 2008
Picon

Canon LiDE 90

Hello,

Thank you for answer, but I had modified my genesys.conf :

# Canon LiDE 35/40/50
usb 0x04a9 0x2213

# Canon LiDE 60
usb 0x04a9 0x221c

# Canon LiDE 90
usb 0x04a9 0x1900

No other idea, because with scanimage nothong happends (no light, no 
moves...)

Guillaume

--

-- 
sane-devel mailing list: sane-devel <at> lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
             to sane-devel-request <at> lists.alioth.debian.org

Derek Terveer | 2 Jan 20:47 2008
Picon

Alias for /etc/udev/libsane.rules

Was:

# Epson CX-6400 | Epson CX-6600

Added 6300 model:

# Epson CX-6400 | Epson CX-6600 | Epson CX-6300

-- 
Derek Terveer
Sun Microsystems (SUNW), Unix Administrator
<derek.terveer <at> sun.com>  651-554-1504  x54404

Ik ben niet op mijn achterhoofd gevallen!

--

-- 
sane-devel mailing list: sane-devel <at> lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
             to sane-devel-request <at> lists.alioth.debian.org

m. allan noah | 3 Jan 02:52 2008
Picon

Re: Alias for /etc/udev/libsane.rules

we would need the USB VID and PID to do anything with this info...

allan

On 1/2/08, Derek Terveer <derek.terveer <at> sun.com> wrote:
> Was:
>
> # Epson CX-6400 | Epson CX-6600
>
> Added 6300 model:
>
> # Epson CX-6400 | Epson CX-6600 | Epson CX-6300
>
>
> --
> Derek Terveer
> Sun Microsystems (SUNW), Unix Administrator
> <derek.terveer <at> sun.com>  651-554-1504  x54404
>
> Ik ben niet op mijn achterhoofd gevallen!
>
> --
> sane-devel mailing list: sane-devel <at> lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>              to sane-devel-request <at> lists.alioth.debian.org
>

--

-- 
"The truth is an offense, but not a sin"
(Continue reading)

Guillaume Gastebois | 3 Jan 13:20 2008
Picon

Canon LiDE 90

Thank you Ralf,

But LiDE 60 PID only appears 2 times in genesys_devices.c and 1 time in
genesys.conf.in I still change them and no result (scanimage -L return LiDE 90
but can't move or turn on led with scanimage >toto.pnm!!!!!!)

For help I did a usbsnoop and with a usbsnoop2libusb.pl a .c file. Maybe it can
help you (or others). You can find then to :
http://ggastebois.free.fr/lide90_snoop

Regards

Guillaume

--

-- 
sane-devel mailing list: sane-devel <at> lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
             to sane-devel-request <at> lists.alioth.debian.org

Julien BLACHE | 3 Jan 20:01 2008

Another avision bug in current CVS : blue scans with HP 5300C

Hi,

Another avision bug, this time with an HP 5300C producing only
all-blue scans (see below).

Feel free to contact the submitter directly, address & details at
<http://bugs.debian.org/458932>.

> After upgrading from 1.0.19~cvs20071028-1 to 1.0.19~cvs20071213-1 all scans
> are blue. <http://izac.free.fr/image-1.0.18-5.ppm> is a correct image using
> libsane-1.0.18-5 and <http://izac.free.fr/image-1.0.19~cvs20071213-1.ppm>
> is the same with libsane-1.0.19~cvs20071213-1 (warning: images are raw
> output of scanimage and sizes are about 6.5 MB). Outputs of ``scanimage
> -v'' are the same with both versions.
>
> % scanimage -L
> device `avision:libusb:004:002' is a Hewlett-Packard ScanJet 5300C flatbed
> scanner

JB.

-- 
 Julien BLACHE - Debian & GNU/Linux Developer - <jblache <at> debian.org> 

 Public key available on <http://www.jblache.org> - KeyID: F5D6 5169 
 GPG Fingerprint : 935A 79F1 C8B3 3521 FD62 7CC7 CD61 4FD7 F5D6 5169 

--

-- 
sane-devel mailing list: sane-devel <at> lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/sane-devel
(Continue reading)

cgi-mailer | 3 Jan 21:09 2008
Picon

Formulardaten


===========================================
== Neuer Eintrag
===========================================

      
-------------------------------------------
-- Formular: 'adddev'
-------------------------------------------

1. Your email address:
   'carter.r.a.l <at> gmail.com'
2. Manufacturer (e.g. "Mustek"):
   'Epson'
3. Model name (e.g. ScanExpress 1200UB):
   'Perfection V500 PHOTO'
4. Bus type:
   'USB'
5. Vendor id (e.g. 0x001):
   '0x04b8'
6. Product id (e.g. 0x0002):
   '0x0130'
7. Chipset (e.g. lm9831):
   ''
8. Comments (e.g. similar to Mustek 1234):
   'New model.'
9. Data (e.g. sane-find-scanner -v -v):
   '
<device descriptor of 0x04b8/0x0130 at 005:008 (EPSON EPSON Scanner)>
bLength               18
(Continue reading)


Gmane