headers
J. Grant | 1 Jan 2006 15:58

Re: make'ing make-3.18beta4 under mingw/msys - "undefined referenceto `sleep'"


On 31/12/05 08:59, Eli Zaretskii wrote:
>> From: "Markus Mauhart" <qwe123 <at> chello.at>
<snip>
>> Btw, despite the trailing error, configure <at> msys-mingw DID result
>> in a working make.exe; nevertheless I'd like to know whether others
>> can reproduce (or better: help me solve) that error.
> 
> That error happens when the Makefile produced by the configure script
> tries to build loadavg.exe, which is a separate program.  But you
> don't need this program, since it is used only for testing the
> produced Make binary.  In fact, I don't even understand why
> loadavg.exe was built: it seems to be part of check-loadavg target
> that should be only invoked if you say "make check", which I think you
> didn't.

MSYS/MinGW "./configure; make" built fine for me, it did not build 
loadavg.exe. Could you post a full log of your build with this error and 
the version of MSYS, MinGW please.

(I am using MSYS v1.0.10 and MinGW 3.1.0 on Win2K)

Kind regards
JG
Permalink | Reply | 0 comments |
headers
Markus Mauhart | 1 Jan 2006 19:14
Picon

Re: make'ing make-3.18beta4 under mingw/msys - "undefinedreferenceto `sleep'"

"Eli Zaretskii" <eliz <at> gnu.org> wrote ...
>
>> From: "Markus Mauhart" <qwe123 <at> chello.at>
>> Date: Fri, 30 Dec 2005 23:46:15 +0100
>> Cc: mingw-users <at> lists.sourceforge.net
>>
>> Actually I was just checking the so copied config.h when I thought it
>> might be a good idea first to check out the config.h computed by
>> configure <at> msys-mingw, hence I decided first to run the 'default'
>> build procedure, with cygwin and with msys/mingw.
>
> Well, if config.h.W32 is different from config.h you get by running
> configure, then please report the discrepancies (with the obvious
> exceptions of a different ordering).

Please see the attached files:

  config.w32    ... copy from official make-3.81beta4
  config.h      ... produced by "configure <at> msys-mingw" (-> see below)
  config.W32.h-config.h.windiff.log
                ... list of different lines, produced by MS windiff

"configure <at> msys-mingw": run the following script inside MSYS' bash.exe,
where my MINGW installation is mounted at /mingw via msys\1.0\etc\fstab:
(also checked out with dstroot == srcroot)
>>   srcroot=/c/usr/src
>>   dstroot=/c/mau/out/mss
>>   pkg=make-3.81beta4
>>   src=$srcroot/$pkg
>>   dst=$dstroot/$pkg
(Continue reading)

Permalink | Reply | 0 comments |
headers
SourceForge.net | 1 Jan 2006 19:25
Picon
Favicon

[mingw - StupidTechiQuestions] Which ver of MinGW, MSYS, msysDTK to install?


Read and respond to this message at: 
https://sourceforge.net/forum/message.php?msg_id=3500358
By: kornerr

I've downloaded MSYS-1.0.10.exe.
Which ver of MinGW and msys-DTK shoud I download?

Thanks.

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit: 
https://sourceforge.net/forum/unmonitor.php?forum_id=7134

-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
MinGW-users mailing list
MinGW-users@...

You may change your MinGW Account Options or unsubscribe at:
https://lists.sourceforge.net/lists/listinfo/mingw-users
Permalink | Reply | 0 comments |
headers
Eli Zaretskii | 1 Jan 2006 21:00
Picon

Re: make'ing make-3.18beta4 under mingw/msys - "undefinedreferenceto `sleep'"

> From: "Markus Mauhart" <qwe123 <at> chello.at>
> Date: Sun, 1 Jan 2006 19:14:37 +0100
> Cc: mingw-users <at> lists.sourceforge.net
> 
> > Well, if config.h.W32 is different from config.h you get by running
> > configure, then please report the discrepancies (with the obvious
> > exceptions of a different ordering).
> 
> Please see the attached files:
> 
>   config.w32    ... copy from official make-3.81beta4
>   config.h      ... produced by "configure <at> msys-mingw" (-> see below)
>   config.W32.h-config.h.windiff.log
>                 ... list of different lines, produced by MS windiff

Thanks.

> >> E.g. I hoped that configure <at> msys-mingw would suggest
> >> '#define FILE_TIMESTAMP_HI_RES 1' (-> turned out not).
> >
> > Why did you think so?
> 
> Because w32-API and NTFS file times have a resolution far below 1s
> (100ns IIRC).

Well, yes, but that's not what the configure script looks for.  The
comment near the test says:

  Find out whether our struct stat returns nanosecond resolution timestamps.
(Continue reading)

Permalink | Reply | 0 comments |
headers
Markus Mauhart | 1 Jan 2006 22:26
Picon

Re: make'ing make-3.18beta4 under mingw/msys -"undefinedreferenceto `sleep'"

"Eli Zaretskii" <eliz <at> gnu.org> wrote ...
>
>> From: "Markus Mauhart" <qwe123 <at> chello.at>
>> Date: Sun, 1 Jan 2006 19:14:37 +0100
>> Cc: mingw-users <at> lists.sourceforge.net
>>
>> ...
>>
>> Because w32-API and NTFS file times have a resolution far below 1s
>> (100ns IIRC).
>
> Well, yes, but that's not what the configure script looks for.  The
> comment near the test says:
>
>  Find out whether our struct stat returns nanosecond resolution timestamps.
>
> So it is actually testing whether `struct stat' returns file times
> with nanosecond resolution, which isn't true with MinGW that uses
> `stat' from the Windows runtime.

Aha, I thought configure <at> msys-mingw would figure out the properties of
msys' _stat, which (like current cygwin) could be HI_RES ... but it seems
that msys is only the build host, while the target is mingw which in turn
uses MS-CRTL's _stat.


>> IIRC every ./configure+make (like above's "configure <at> msys-mingw") of some
>> gmake381xxx I did (cygwin, msys) at the end tried to build loadavg.exe
>> - succeeding under cygwin, failing under msys.
>
(Continue reading)

Permalink | Reply | 0 comments |
headers
Markus Mauhart | 1 Jan 2006 22:34
Picon

Re: make'ing make-3.18beta4 under mingw/msys - "undefined reference to `sleep'"

"J. Grant" <jg <at> jguk.org> wrote ...
>
>
> On 31/12/05 08:59, Eli Zaretskii wrote:
>>> From: "Markus Mauhart" <qwe123 <at> chello.at>
> <snip>
>>> Btw, despite the trailing error, configure <at> msys-mingw DID result
>>> in a working make.exe; nevertheless I'd like to know whether others
>>> can reproduce (or better: help me solve) that error.
>>
>> That error happens when the Makefile produced by the configure script
>> tries to build loadavg.exe, which is a separate program.  But you
>> don't need this program, since it is used only for testing the
>> produced Make binary.  In fact, I don't even understand why
>> loadavg.exe was built: it seems to be part of check-loadavg target
>> that should be only invoked if you say "make check", which I think you
>> didn't.
>
> MSYS/MinGW "./configure; make" built fine for me, it did not build loadavg.exe. Could you post a 
> full log of your build with this error and the version of MSYS, MinGW please.
>
> (I am using MSYS v1.0.10 and MinGW 3.1.0 on Win2K)

Please see my other msg (Message-ID: <dp9hhv$o66$1 <at> sea.gmane.org>) which
contains details you never want to know ;-)

Best Regards !
Markus.
Permalink | Reply | 0 comments |
headers
SourceForge.net | 1 Jan 2006 23:26
Picon
Favicon

[mingw - C/C++] The New IDE - EXTEIDE


Read and respond to this message at: 
https://sourceforge.net/forum/message.php?msg_id=3500531
By: exazettayotta

http://www.exteide.com

can download EXTEIDE.

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit: 
https://sourceforge.net/forum/unmonitor.php?forum_id=286529

-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
MinGW-users mailing list
MinGW-users@...

You may change your MinGW Account Options or unsubscribe at:
https://lists.sourceforge.net/lists/listinfo/mingw-users
Permalink | Reply | 0 comments |
headers
SourceForge.net | 1 Jan 2006 23:32
Picon
Favicon

[mingw - StupidTechiQuestions] RE: Which ver of MinGW, MSYS, msysDTK to inst


Read and respond to this message at: 
https://sourceforge.net/forum/message.php?msg_id=3500536
By: pgarceau

If you are just starting out with Msys development, then use only the current
versions.  Check out the file download list and the appropriate distributions
will be arranged according to type of release.  Candidate releases are still
in testing, current releases are "stable".

 Also see:  http://mingw.sourceforge.net/download.shtml#Contents

Paul G.

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit: 
https://sourceforge.net/forum/unmonitor.php?forum_id=7134

-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
MinGW-users mailing list
MinGW-users@...

You may change your MinGW Account Options or unsubscribe at:
https://lists.sourceforge.net/lists/listinfo/mingw-users
(Continue reading)

Permalink | Reply | 0 comments |
headers
SourceForge.net | 2 Jan 2006 04:18
Picon
Favicon

[mingw - StupidTechiQuestions] RE: Which ver of MinGW, MSYS, msysDTK to install?


Read and respond to this message at: 
https://sourceforge.net/forum/message.php?msg_id=3500722
By: kornerr

Well, MSYS-1.0.10.exe is current, but there's no current MinGW.exe, only previous.
Will the previous MinGW.exe work with the current MSYS.exe?

Thanks.

______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit: 
https://sourceforge.net/forum/unmonitor.php?forum_id=7134

-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
MinGW-users mailing list
MinGW-users@...

You may change your MinGW Account Options or unsubscribe at:
https://lists.sourceforge.net/lists/listinfo/mingw-users
Permalink | Reply | 0 comments |
headers
Eli Zaretskii | 2 Jan 2006 06:03
Picon

Re: make'ing make-3.18beta4 under mingw/msys -"undefined reference to `sleep'"

> From: "Markus Mauhart" <qwe123 <at> chello.at>
> Date: Sun, 1 Jan 2006 22:26:19 +0100
> Cc: mingw-users <at> lists.sourceforge.net
> 
> and only 3) I'm wondering whether loadavg.exe should be a make-target during
> "make [all]" or not.
> -> see the appended files for more details:

Ah, I see now: "make all" runs "make all-am", which tries to build
PROGRAMS, and PROGRAMS includes loadavg.exe (which IMHO it shouldn't
on Windows, but Makefile.in doesn't know about it).
Permalink | Reply | 0 comments |

Gmane