Peter Hutterer | 1 Feb 01:54 2010
Picon

Re: How to use text terminal in MPX in full screen mode.

On Sat, Jan 30, 2010 at 03:13:19PM +0530, Amey Moghe wrote:
> Hello all ,
>            I have configured MPX with version X.Org X server 1.7.99.1 long
> time back.I am using *xterminal *in .xinitrc and I want it to be used in
> full screen mode in MPX.So please suggest how to use it in full screen mode.

tbh, this seems to be a rather odd use-case so a little bit more detail on
what you're trying to achieve might be helpful.

from the above, the only advice I can give is:
full-screen is handled by the window manager (on request of the application
through the ICCM). just running xterm means you don't have a window manager
and xterm needs to be started with the -geometry flag to get the desired
window size.

Cheers,
  Peter
Peter Hutterer | 1 Feb 01:58 2010
Picon

Re: Failure in detecting keyboard

On Sat, Jan 30, 2010 at 09:17:12AM +0530, Amey wrote:
> Hello all,
>                I am a final year graduate student and I am trying to
> configure X server.In that when I tried to run X server after all the
> configuration done with following commands:
> 
> *1) sudo /etc/init.d/gdm stop
> 2) sudo startx -- /opt/mpx/bin/Xorg verbose :0   (P.S. I installed all the
> packages with prefix /opt/mpx )
> *
> then X server didn't run initialy  and I got the following log:
> 
> (II) AIGLX: Loaded and initialized /opt/mpx/lib/dri/swrast_dri.so
> (II) GLX: Initialized DRISWRAST GL provider for screen 0
> (II) NV(0): Setting screen physical size to 338 x 211
> (EE) Error compiling keymap (server-0)
> (EE) XKB: Couldn't compile keymap
> XKB: Failed to compile keymap
> Keyboard initialization failed. This could be a missing or incorrect setup
> of xkeyboard-config.

This is often the case if /opt/mpx/share/X11/xkb/compiled/ doesn't exist or
isn't writable. Check for that too.

> For above error  I configured xkeyboard-config package with prefix /opt/mpx/
> and again tried to run X server with above sequence of  commands.But still
> error was there. So checked for "xkbcomp" in /opt/mpx then found it here:
> 
> /opt/mpx/share/X11/xkb

(Continue reading)

Dan Nicholson | 1 Feb 04:32 2010
Picon

Re: Failure in detecting keyboard

On Sun, Jan 31, 2010 at 4:58 PM, Peter Hutterer
<peter.hutterer <at> who-t.net> wrote:
> On Sat, Jan 30, 2010 at 09:17:12AM +0530, Amey wrote:
>> Hello all,
>>                I am a final year graduate student and I am trying to
>> configure X server.In that when I tried to run X server after all the
>> configuration done with following commands:
>>
>> *1) sudo /etc/init.d/gdm stop
>> 2) sudo startx -- /opt/mpx/bin/Xorg verbose :0   (P.S. I installed all the
>> packages with prefix /opt/mpx )
>> *
>> then X server didn't run initialy  and I got the following log:
>>
>> (II) AIGLX: Loaded and initialized /opt/mpx/lib/dri/swrast_dri.so
>> (II) GLX: Initialized DRISWRAST GL provider for screen 0
>> (II) NV(0): Setting screen physical size to 338 x 211
>> (EE) Error compiling keymap (server-0)
>> (EE) XKB: Couldn't compile keymap
>> XKB: Failed to compile keymap
>> Keyboard initialization failed. This could be a missing or incorrect setup
>> of xkeyboard-config.
>
> This is often the case if /opt/mpx/share/X11/xkb/compiled/ doesn't exist or
> isn't writable. Check for that too.
>
>> For above error  I configured xkeyboard-config package with prefix /opt/mpx/
>> and again tried to run X server with above sequence of  commands.But still
>> error was there. So checked for "xkbcomp" in /opt/mpx then found it here:
>>
(Continue reading)

Peter Hutterer | 1 Feb 05:53 2010
Picon

Re: Failure in detecting keyboard

On Sun, Jan 31, 2010 at 07:32:04PM -0800, Dan Nicholson wrote:
> On Sun, Jan 31, 2010 at 4:58 PM, Peter Hutterer
> <peter.hutterer@...> wrote:
> > On Sat, Jan 30, 2010 at 09:17:12AM +0530, Amey wrote:
> >> Hello all,
> >>                I am a final year graduate student and I am trying to
> >> configure X server.In that when I tried to run X server after all the
> >> configuration done with following commands:
> >>
> >> *1) sudo /etc/init.d/gdm stop
> >> 2) sudo startx -- /opt/mpx/bin/Xorg verbose :0   (P.S. I installed all the
> >> packages with prefix /opt/mpx )
> >> *
> >> then X server didn't run initialy  and I got the following log:
> >>
> >> (II) AIGLX: Loaded and initialized /opt/mpx/lib/dri/swrast_dri.so
> >> (II) GLX: Initialized DRISWRAST GL provider for screen 0
> >> (II) NV(0): Setting screen physical size to 338 x 211
> >> (EE) Error compiling keymap (server-0)
> >> (EE) XKB: Couldn't compile keymap
> >> XKB: Failed to compile keymap
> >> Keyboard initialization failed. This could be a missing or incorrect setup
> >> of xkeyboard-config.
> >
> > This is often the case if /opt/mpx/share/X11/xkb/compiled/ doesn't exist or
> > isn't writable. Check for that too.
> >
> >> For above error  I configured xkeyboard-config package with prefix /opt/mpx/
> >> and again tried to run X server with above sequence of  commands.But still
> >> error was there. So checked for "xkbcomp" in /opt/mpx then found it here:
(Continue reading)

Peter Hutterer | 1 Feb 06:40 2010
Picon

Re: [PATCH modular] build.sh: remove old commented out modules

On Mon, Jan 25, 2010 at 10:03:33AM -0500, Gaetan Nadon wrote:
> This information is no longer useful.
> 
> Signed-off-by: Gaetan Nadon <memsize@...>
> ---
>  build.sh |   24 ------------------------
>  1 files changed, 0 insertions(+), 24 deletions(-)
> 
> diff --git a/build.sh b/build.sh
> index e252c7c..eae96f5 100755
> --- a/build.sh
> +++ b/build.sh
>  <at>  <at>  -322,8 +322,6  <at>  <at>  build_lib() {
>      build lib libfontenc
>      build lib libFS
>      build lib libICE
> -    #build lib liblbxutil
> -    #build lib liboldX
>      build lib libSM
>      build lib libXt
>      build lib libXmu
>  <at>  <at>  -467,7 +465,6  <at>  <at>  build_driver_input() {
>  	    build driver xf86-input-aiptek
>  	    build driver xf86-input-evdev
>  	    build driver xf86-input-joystick
> -	    #build driver xf86-input-ur98
>  	    ;;
>  	*BSD*)
>  	    build driver xf86-input-joystick
>  <at>  <at>  -486,28 +483,9  <at>  <at>  build_driver_input() {
(Continue reading)

Peter Hutterer | 1 Feb 06:42 2010
Picon

Re: [PATCH modular] build.sh: remove USE_XCB conditional

On Mon, Jan 25, 2010 at 01:06:03PM -0500, Gaetan Nadon wrote:
> On Mon, 2010-01-25 at 18:48 +0100, Julien Cristau wrote:
> 
> > Hi Gaetan,
> > 
> > On Mon, Jan 25, 2010 at 12:24:51 -0500, Gaetan Nadon wrote:
> > 
> > > The configure --with-xcb option does not exist on xserver.
> > > 
> > I'm not sure what xserver has to do with this.  This option allows to
> > build Xlib without libxcb, AFAIK, it doesn't change anything for the
> > server.  I'm not saying removing it is a bad idea, but this commit
> > message doesn't seem to make sense.
> > 
> 
> You are right, silly mistake on my part. I have no reasons to remove it
> unless I am told it isn't used by anyone. I thought xcb was always used
> now a day, no this was redundant.

libX11 can still be built with xcb and should still work in that case. Not
sure who does it, but until that option is removed from libX11 it may make
more sense to leave the build option in here.

Cheers,
  Peter
Peter Hutterer | 1 Feb 08:39 2010
Picon

Re: [PATCH] Re-enable the RECORD extension. (#20500)

On Wed, Jan 27, 2010 at 01:42:45PM -0800, Keith Packard wrote:
> On Thu, 14 Jan 2010 09:28:10 +1000, Peter Hutterer
<peter.hutterer@...> wrote:
> 
> > Oh, now I get it. yes, you're right and I wonder if that ever worked for
> > extension devices. Server 1.3 had a guard for syncEvents.playingEvents to
> > avoid this situation - but only for core events. POE lacked this check, so
> > we must have recorded events twice.
> 
> Is this patch ready to merge now?

no, I need to go over Chris' original patch again and review it once more.

Cheers,
  Peter
Sergey Udaltsov | 1 Feb 09:43 2010
Picon

Re: Failure in detecting keyboard

Hi Peter

> Sergey, is there still reason for doing this? I note the commit dates back
> to 2004.
Well, at that point in 2004 something did not work without it, so I
created it. If you're saying that now it is not necessary, I will
disable that feature forever. No problem at all.

Sergey
Gaetan Nadon | 1 Feb 14:49 2010
Picon

Re: [PATCH modular] build.sh: remove old commented out modules

On Mon, 2010-02-01 at 15:40 +1000, Peter Hutterer wrote:
On Mon, Jan 25, 2010 at 10:03:33AM -0500, Gaetan Nadon wrote: > This information is no longer useful. > > Signed-off-by: Gaetan Nadon <memsize-XzQKRVe1yT0V+D8aMU/kSg@public.gmane.org> > --- > build.sh | 24 ------------------------ > 1 files changed, 0 insertions(+), 24 deletions(-) > > diff --git a/build.sh b/build.sh > index e252c7c..eae96f5 100755 > --- a/build.sh > +++ b/build.sh > <at> <at> -322,8 +322,6 <at> <at> build_lib() { > build lib libfontenc > build lib libFS > build lib libICE > - #build lib liblbxutil > - #build lib liboldX > build lib libSM > build lib libXt > build lib libXmu > <at> <at> -467,7 +465,6 <at> <at> build_driver_input() { > build driver xf86-input-aiptek > build driver xf86-input-evdev > build driver xf86-input-joystick > - #build driver xf86-input-ur98 > ;; > *BSD*) > build driver xf86-input-joystick > <at> <at> -486,28 +483,9 <at> <at> build_driver_input() { > esac > > build driver xf86-input-acecad > - #build driver xf86-input-calcomp > - #build driver xf86-input-citron > - #build driver xf86-input-digitaledge > - #build driver xf86-input-dmc > - #build driver xf86-input-dynapro > - #build driver xf86-input-elo2300 > - #build driver xf86-input-elographics > - #build driver xf86-input-fpit > - #build driver xf86-input-hyperpen > - #build driver xf86-input-jamstudio > build driver xf86-input-keyboard > - #build driver xf86-input-magellan > - #build driver xf86-input-magictouch > - #build driver xf86-input-microtouch > build driver xf86-input-mouse > - #build driver xf86-input-mutouch > - #build driver xf86-input-palmax > - #build driver xf86-input-penmount > - #build driver xf86-input-spaceorb > - #build driver xf86-input-summa > build driver xf86-input-synaptics > - #build driver xf86-input-tek4957 > build driver xf86-input-void > } > > <at> <at> -548,7 +526,6 <at> <at> build_driver_video() { > i*86* | amd64* | x86*64*) > build driver xf86-video-i740 > build driver xf86-video-intel > -# build driver xf86-video-via > ;; > *) > ;; > <at> <at> -572,7 +549,6 <at> <at> build_driver_video() { > # build driver xf86-video-glide > build driver xf86-video-glint > build driver xf86-video-i128 > -# build driver xf86-video-imstt > build driver xf86-video-mach64 > build driver xf86-video-mga > build driver xf86-video-neomagic > -- > 1.6.0.4 > out of curiosity - why did you leave the glide driver in?

It was shipped in 7.5.
other than that, Reviewed-by: Peter Hutterer <peter.hutterer-Pf4JEFdB4epeoWH0uzbU5w@public.gmane.org> Cheers, Peter
_______________________________________________
xorg-devel mailing list
xorg-devel@...
http://lists.x.org/mailman/listinfo/xorg-devel
Guillem Jover | 1 Feb 15:27 2010

Re: [PATCH modular] build.sh: remove old commented out modules

Hi!

On Mon, 2010-02-01 at 08:49:53 -0500, Gaetan Nadon wrote:
> On Mon, 2010-02-01 at 15:40 +1000, Peter Hutterer wrote:
> > >  <at>  <at>  -572,7 +549,6  <at>  <at>  build_driver_video() {
> > >  #    build driver xf86-video-glide
> > >      build driver xf86-video-glint
> > >      build driver xf86-video-i128

> > out of curiosity - why did you leave the glide driver in?

> It was shipped in 7.5.

Right, it's still maintained. Also my guess is it's commented there
mostly because it requires libglide2 to build, and that's annoying
for someone who does not care about the glide driver.

regards,
guillem

Gmane