headers
Toyotomi | 4 Nov 2002 01:14
Picon

.AFS file

I've stumbled onto a .AFS file and was wondering
if it is in any way related to Andrew File System.

The first 3 bytes of this 500 meg file are "AFS" and
the end of the file seems to list many filepaths,
which I assume are inside this container file...

Is this related to Andrew File System? If so, how
can I access the files inside this container file?

-Toyotomi
Permalink | Reply | 0 comments |
headers
Harald Barth | 4 Nov 2002 19:27
Picon
Picon
Favicon

Re: error installing under Linux


hidas wrote:
> I think, I prefer 0.36 then :-) Is it coming ?

In the process of producing a 0.36 release some time in the future,
there is a new snapshot available. The usual caution signs for using
prerelease software apply. I have tested this stuff under Linux with
stock 2.4.12 and 2.4.18 kernels in SuSE and RH build environments. I
have not tested with the kernels supplied with the distributions. If
you test this under your favourite OS, please let the arla drinkers
know any success or crash stories.

file:///afs/stacken.kth.se/ftp/pub/arla/snap/arla-0.36pre3.tar.gz
ftp://ftp.stacken.kth.se/pub/arla/snap/arla-0.36pre3.tar.gz

Hint: My configure command line looks like:

../arla/configure --with-sys=/usr/src/linux-2.4.18 --with-krb4=/usr/athena-1.2.1
--without-krb5 --without-ipv6

Harald.
Permalink | Reply | 1 comment |
headers
yf | 5 Nov 2002 09:28

where can I get some Solaris kernel dev files?

Best regards.

/yf
Permalink | Reply | 0 comments |
headers
Hidas Pal | 8 Nov 2002 15:59
Picon

Re: error installing under Linux


I did it. After simply

./configure   (without any option)
make
make install
/usr/arla/sbin/startarla

Now I have read access - still need to install kerberos - to the
afs world. I have SuSE 8.0 (Linux 2.4.18-4GB), and dynamic IP
address from my ADSL provider (pppoe protocol).
I will do the same with my office PC too.

Thanks,
Pal

On Mon, 4 Nov 2002, Harald Barth wrote:

>
> hidas wrote:
> > I think, I prefer 0.36 then :-) Is it coming ?
>
> In the process of producing a 0.36 release some time in the future,
> there is a new snapshot available. The usual caution signs for using
> prerelease software apply. I have tested this stuff under Linux with
> stock 2.4.12 and 2.4.18 kernels in SuSE and RH build environments. I
> have not tested with the kernels supplied with the distributions. If
> you test this under your favourite OS, please let the arla drinkers
> know any success or crash stories.
>
(Continue reading)

Permalink | Reply | 0 comments |
headers
devdrvr.net Multi-Platform SW | 21 Nov 2002 19:41

Re: arla-commit

How do I unsubcribe to getting cvs notification of this?

--Perry

On 11/21/02 8:25 AM, "arla-commit <at> stacken.kth.se"
<arla-commit <at> stacken.kth.se> wrote:

> Commited by: Love <lha <at> stacken.kth.se>
> Date: 2002-11-21 17:21:19
> Update of: arla/tests
> 
> 
> Modified Files:
> generic-build 
> Log Message:
> also send make output to fd 4
> 
> 
> To generate diffs use the following commands:
> 
> cvs rdiff -r1.5 -r1.6 arla/tests/generic-build
>
Permalink | Reply | 0 comments |
headers
devdrvr.net Multi-Platform SW | 28 Nov 2002 06:29

Re[UNSUBSCRIBE DEVDRVR <at> DAVIS.COM PLEASE]: arla-commit

On 11/27/02 3:45 PM, "arla-commit <at> stacken.kth.se"
<arla-commit <at> stacken.kth.se> wrote:

> Commited by: Love <lha <at> stacken.kth.se>
> Date: 2002-11-28 00:44:53
> Update of: arla/rx
> 
> 
> Modified Files:
> rx.c 
> Log Message:
> (rx_NewService): copy securityObjects and have this leak the memory
> instead of the callee (that now can allocate the securityObjects on
> the stack)
> (rxi_Alloc): make it return void *
> (rx_getServiceRock,+rx_setServiceRock): new service rock functions
> (rxi_ReceivePacket): make use of rx_SlowGetLong instead of rx_GetLong
> 
> 
> To generate diffs use the following commands:
> 
> cvs rdiff -r1.29 -r1.30 arla/rx/rx.c
>
Permalink | Reply | 0 comments |
headers
devdrvr.net Multi-Platform SW | 28 Nov 2002 20:14

Re[PLEASE UNSUBSCRIBE ME THIS MESSAGE CONTINUES UNTIL DONE]: arla-commit

On 11/27/02 10:25 PM, "arla-commit <at> stacken.kth.se"
<arla-commit <at> stacken.kth.se> wrote:

> Commited by: Love <lha <at> stacken.kth.se>
> Date: 2002-11-28 07:24:25
> Update of: arla/nnpfs/include/nnpfs
> 
> 
> Added Files:
> nnpfs_queue.h 
> Log Message:
> some useful list macros
> 
> To generate diffs use the following commands:
> 
> cvs rdiff -r0 -r1.1 arla/nnpfs/include/nnpfs/nnpfs_queue.h
>
Permalink | Reply | 0 comments |
headers
devdrvr.net Multi-Platform SW | 28 Nov 2002 05:52

Re[PLEASE UNSUBSCRIBE ME THIS MESSAGE COMING BACK TO GROUP UNTIL REMOVED]: arla-commit

On 11/27/02 3:50 PM, "arla-commit <at> stacken.kth.se"
<arla-commit <at> stacken.kth.se> wrote:

> Commited by: Love <lha <at> stacken.kth.se>
> Date: 2002-11-28 00:47:01
> Update of: arla/rx
> 
> 
> Modified Files:
> rx_pkt.h 
> Log Message:
> replace rx_{Put,Get}Long with rx_Slow{Get,Put}Long
> 
> 
> To generate diffs use the following commands:
> 
> cvs rdiff -r1.10 -r1.11 arla/rx/rx_pkt.h
>
Permalink | Reply | 0 comments |
headers
devdrvr.net Multi-Platform SW | 28 Nov 2002 21:27

Re[PLEASE UNSUBSCRIBE ME DEVDRVR <at> DAVIS.COM]: arla-commit

On 11/27/02 10:30 PM, "arla-commit <at> stacken.kth.se"
<arla-commit <at> stacken.kth.se> wrote:

> Commited by: Love <lha <at> stacken.kth.se>
> Date: 2002-11-28 07:24:59
> Update of: arla
> 
> 
> Modified Files:
> ChangeLog 
> Log Message:
> *** empty log message ***
> 
> To generate diffs use the following commands:
> 
> cvs rdiff -r1.1823 -r1.1824 arla/ChangeLog
>
Permalink | Reply | 0 comments |
headers
devdrvr.net Multi-Platform SW | 29 Nov 2002 05:48

Re: Re[UNSUBSCRIBE DEVDRVR <at> DAVIS.COM PLEASE]: arla-commit

Yes I lost the instructions and my pleas for help went ignored for months
until I started doing this.  Now I'm off the list.  Sorry for the
unnecessary emails.  Thanks.

--Perry

On 11/28/02 3:49 PM, "Remi Mommsen" <remi.mommsen <at> gmx.net> wrote:

> Hi spammer,
> 
> Are you crazy or why are you spamming our mailboxes with auto-replies
> to two (!) mailing list of each message you receive? You've received an
> email describing how to unsubscribe from the mailing list when you
> subscribed to it. It's not our fault when you cannot save this message
> for future reference. Please stop the spamming immediately!
> 
> Here is my mail I got when I subscribed to the arla-drinkers list (with
> small modifications):
> 
> Welcome to the arla-drinkers mailing list!
> 
> Please save this message for future reference.  Thank you.
> 
> If you ever want to remove yourself from this mailing list,
> send the following command in email to
> <arla-drinkers-request <at> stacken.kth.se>:
> 
>    unsubscribe
> 
> Or you can send mail to <Majordomo <at> stacken.kth.se> with the following
(Continue reading)

Permalink | Reply | 0 comments |

Gmane