DENX Embedded Linux Development Kit discussion ()

yel_yahc | 6 May 2010 18:11

Picon

ELDK's bind package

Hello, 
This afternoon I tried to rebuild the package BIND but I get this error
when I do :

${CROSS_COMPILE}rpmbuild -ba bind.spec : After a lot of messages I got in
the end this:

+ /usr/bin/tail -n +19 bin/rndc/rndc.conf
+ chmod 0755
/home/jp/project/ELDK-4.2/var/tmp/bind-9.4.1-8.P1-root-jp/usr/lib/lib*.so.*
chmod: ne peut acc?der
`/home/jp/project/ELDK-4.2/var/tmp/bind-9.4.1-8.P1-root-jp/usr/lib/lib*so.*':
Aucun fichier ou dossier de ce type
erreur: Mauvais status de sortie pour
/home/jp/project/ELDK-4.2/var/tmp/rpm-tmp.37899 (%install)

Any idea???
Because I use a custom package (BIRD) and it require lib*.so.* 

Best regards,
Youssef

Wolfgang Grandegger | 6 May 2010 19:39

Picon

Picon

[PATCH RFSB] skeleton/self: add proper terminfo files in the expected location

While trying to get "top" working on my ramdisk image, I observed
that some terminfo files are missing and not at the expected
location. This patch adds terminfo file in /usr/share/terminfo
for vt102, linux and xterm's.

Signed-off-by: Wolfgang Grandegger <wg at denx.de>
---
 config/skeleton/self/etc/terminfo/l/linux       |  Bin 1567 -> 0 bytes
 config/skeleton/self/usr/share/terminfo/l/linux |  Bin 0 -> 1740 bytes
 config/skeleton/self/usr/share/terminfo/v/vt102 |  Bin 0 -> 1188 bytes
 config/skeleton/self/usr/share/terminfo/x/xterm |  Bin 0 -> 2522 bytes
 4 files changed, 0 insertions(+), 0 deletions(-)
 delete mode 100644 config/skeleton/self/etc/terminfo/l/linux
 create mode 100644 config/skeleton/self/usr/share/terminfo/l/linux
 create mode 100644 config/skeleton/self/usr/share/terminfo/v/vt102
 create mode 100644 config/skeleton/self/usr/share/terminfo/x/xterm

diff --git a/config/skeleton/self/etc/terminfo/l/linux b/config/skeleton/self/etc/terminfo/l/linux
deleted file mode 100644
index 2d8bca22c59a1531a23e6785eedf60875e9f634a..0000000000000000000000000000000000000000
GIT binary patch
literal 0
HcmV?d00001

literal 1567
zcmbu9O=uHQ5Xa{|3r3+(i=s9Z6x~Ddqq}c+^Fgf9YDq9HYA;noQAuhW%}4E*t!<+P
zQA7`V=|MdRB7zq!dJqJ)8ucIup8Ps`QYc01p%;xa?`;xo6<fMw{_~r8vpa8RAE{!?
zp&BY+n7!o5M7p<sNa~tcCf%J$wgE8wp~=gEVhH)X3+->03${Tet^sf;gB4H(Ye9n=
z%vjI>A&5W= <at> _uMTO+X3;U>GT%AAxglQPO1?g{w%{;U?UMJMaJ=$ <at> ~j=1#jT3<WlF)
z7*9C4N%Y <at> ~>(lT97BLqqXO(Ovt7hw14Xb4q%jf-Qb*!F+(9;!hyozS)Zd`9>QKu^Y

(Continue reading)

Wolfgang Denk | 6 May 2010 19:45

Picon

Picon

ELDK's bind package

Dear yel_yahc,

In message <b30ab00982967726fcb930aaf39c93c9 at etud.insa-toulouse.fr> you wrote:
>
> This afternoon I tried to rebuild the package BIND but I get this error
> when I do :
...
> + /usr/bin/tail -n +19 bin/rndc/rndc.conf
> + chmod 0755
> /home/jp/project/ELDK-4.2/var/tmp/bind-9.4.1-8.P1-root-jp/usr/lib/lib*.so.*
> chmod: ne peut acc??der
> `/home/jp/project/ELDK-4.2/var/tmp/bind-9.4.1-8.P1-root-jp/usr/lib/lib*so.*':
> Aucun fichier ou dossier de ce type
> erreur: Mauvais status de sortie pour
> /home/jp/project/ELDK-4.2/var/tmp/rpm-tmp.37899 (%install)

Could you please switch the language to English?

Es tut mir leid, aber ich kann die franz?sischen Meldungen leider
nicht verstehen.

Viele Gr??e,

Wolfgang Denk

--

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I'm frequently appalled by the low regard you Earthmen have for life.

(Continue reading)

naeem memon | 7 May 2010 07:33

Picon

ELDK issue with Valgrind........

Hi All,

I am facing the same problem as mentioned in the below link:

http://lists.denx.de/pipermail/eldk/2008-March/000099.html

I am not able to see the follow-up of this matter. Can anybode please suggest regarding this?

 
---
Thanks and Regards,
Naeem Memon

yel_yahc | 7 May 2010 09:53

Picon

ELDK's bind package


>>
>> This afternoon I tried to rebuild the package BIND but I get this error
>> when I do :
> ...
>> + /usr/bin/tail -n +19 bin/rndc/rndc.conf
>> + chmod 0755
>>
/home/jp/project/ELDK-4.2/var/tmp/bind-9.4.1-8.P1-root-jp/usr/lib/lib*.so.*
>> chmod: ne peut acc??der
>>
`/home/jp/project/ELDK-4.2/var/tmp/bind-9.4.1-8.P1-root-jp/usr/lib/lib*so.*':
>> Aucun fichier ou dossier de ce type
>> erreur: Mauvais status de sortie pour
>> /home/jp/project/ELDK-4.2/var/tmp/rpm-tmp.37899 (%install)
> 
> Could you please switch the language to English?

> ...
>> + /usr/bin/tail -n +19 bin/rndc/rndc.conf
>> + chmod 0755
>>
/home/jp/project/ELDK-4.2/var/tmp/bind-9.4.1-8.P1-root-jp/usr/lib/lib*.so.*
>> chmod: cannot access to 
>>
`/home/jp/project/ELDK-4.2/var/tmp/bind-9.4.1-8.P1-root-jp/usr/lib/lib*so.*':
>> No such file or directory
>> Error: Wrong out status of 
>> /home/jp/project/ELDK-4.2/var/tmp/rpm-tmp.37899 (%install)

(Continue reading)

Wolfgang Denk | 7 May 2010 10:05

Picon

Picon

ELDK's bind package

Dear yel_yahc,

In message <c76b2db2b828995651b8604b31269840 at etud.insa-toulouse.fr> you wrote:
> 
> > Could you please switch the language to English?
> 
> > ...
> >> + /usr/bin/tail -n +19 bin/rndc/rndc.conf
> >> + chmod 0755
> >>
> /home/jp/project/ELDK-4.2/var/tmp/bind-9.4.1-8.P1-root-jp/usr/lib/lib*.so.*
> >> chmod: cannot access to 
> >>
> `/home/jp/project/ELDK-4.2/var/tmp/bind-9.4.1-8.P1-root-jp/usr/lib/lib*so.*':
> >> No such file or directory
> >> Error: Wrong out status of 
> >> /home/jp/project/ELDK-4.2/var/tmp/rpm-tmp.37899 (%install)

This is manually translated, and not the original error messages,
right?

What I meant was: please set the language on your system to something
like en_US.UTF-8, re-run the build, and then send the original error
messages (if any).

Best regards,

Wolfgang Denk

--

--

(Continue reading)

yel_yahc | 7 May 2010 10:15

Picon

ELDK's bind package

On Fri, 07 May 2010 10:05:56 +0200, Wolfgang Denk <wd at denx.de> wrote:
> Dear yel_yahc,
> 
> In message <c76b2db2b828995651b8604b31269840 at etud.insa-toulouse.fr> you
> wrote:
>> 
>> > Could you please switch the language to English?
>> 
>> > ...
>> >> + /usr/bin/tail -n +19 bin/rndc/rndc.conf
>> >> + chmod 0755
>> >>
>>
/home/jp/project/ELDK-4.2/var/tmp/bind-9.4.1-8.P1-root-jp/usr/lib/lib*.so.*
>> >> chmod: cannot access to 
>> >>
>>
`/home/jp/project/ELDK-4.2/var/tmp/bind-9.4.1-8.P1-root-jp/usr/lib/lib*so.*':
>> >> No such file or directory
>> >> Error: Wrong out status of 
>> >> /home/jp/project/ELDK-4.2/var/tmp/rpm-tmp.37899 (%install)
> 
> This is manually translated, and not the original error messages,
> right?
> 
> What I meant was: please set the language on your system to something
> like en_US.UTF-8, re-run the build, and then send the original error
> messages (if any).

Yes you're right is manually translated, if I switch the language of my

(Continue reading)

Detlev Zundel | 7 May 2010 17:46

Picon

Picon

Picon

ELDK issue with Valgrind........

Hi Naeem,

> I am facing the same problem as mentioned in the below link:
>
> http://lists.denx.de/pipermail/eldk/2008-March/000099.html
>
> I am not able to see the follow-up of this matter. Can anybode please
> suggest regarding this?

Well the obvious way forward is to generate a glibc with debug info.
Whether this fixes all remaining problems is unknown however.

Unfortunately this is a non-trivial task and nobody cared enough to
actually do it.

You are welcome to try and share the results.

Best wishes
  Detlev

--

-- 
... that every year or so they're going to give you a new release full
of 50 000  additional lines of code all  written  by monkeys.  Because
they generally follow  the  ``million monkeys typing,   and eventually
they'll come up with something useful'' school of system development.
	                                    -- Richard M. Stallman
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de

(Continue reading)

Detlev Zundel | 7 May 2010 17:53

Picon

Picon

Picon

[PATCH RFSB] skeleton/self: add proper terminfo files in the expected location

Hi Wolfgang,

> While trying to get "top" working on my ramdisk image, I observed
> that some terminfo files are missing and not at the expected
> location. This patch adds terminfo file in /usr/share/terminfo
> for vt102, linux and xterm's.

Thanks applied.  I'll send a correpsonding patch for the other skeletion
that we have.  If nobody complains I'll pull that in also.

Cheers
  Detlev

--

-- 
Quality isn't something you lay on top of subjects and objects like
tinsel on a christmas tree.  Real Quality must be the source of the
subjects and objects, the cone from which the tree must start.
                                        -- Robert M. Pirsig
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de

Detlev Zundel | 7 May 2010 17:55

Picon

Picon

Picon

[PATCH] skeletion/cramfs: add proper terminfo files in the expected lcoation

This is the logical extension of commit
cc38dc10a9db5ff3c71df3435b219b8fbc678404 to the other skeletion that we
currently have.

Signed-off-by: Detlev Zundel <dzu at denx.de>
CC: Wolfgang Denk <wd at denx.de>
---
 config/skeleton/cramfs/etc/terminfo/l/linux       |  Bin 1567 -> 0 bytes
 config/skeleton/cramfs/usr/share/terminfo/l/linux |  Bin 0 -> 1740 bytes
 config/skeleton/cramfs/usr/share/terminfo/v/vt102 |  Bin 0 -> 1188 bytes
 config/skeleton/cramfs/usr/share/terminfo/x/xterm |  Bin 0 -> 2522 bytes
 4 files changed, 0 insertions(+), 0 deletions(-)
 delete mode 100644 config/skeleton/cramfs/etc/terminfo/l/linux
 create mode 100644 config/skeleton/cramfs/usr/share/terminfo/l/linux
 create mode 100644 config/skeleton/cramfs/usr/share/terminfo/v/vt102
 create mode 100644 config/skeleton/cramfs/usr/share/terminfo/x/xterm

diff --git a/config/skeleton/cramfs/etc/terminfo/l/linux b/config/skeleton/cramfs/etc/terminfo/l/linux
deleted file mode 100644
index 2d8bca22c59a1531a23e6785eedf60875e9f634a..0000000000000000000000000000000000000000
GIT binary patch
literal 0
HcmV?d00001

literal 1567
zcmbu9O=uHQ5Xa{|3r3+(i=s9Z6x~Ddqq}c+^Fgf9YDq9HYA;noQAuhW%}4E*t!<+P
zQA7`V=|MdRB7zq!dJqJ)8ucIup8Ps`QYc01p%;xa?`;xo6<fMw{_~r8vpa8RAE{!?
zp&BY+n7!o5M7p<sNa~tcCf%J$wgE8wp~=gEVhH)X3+->03${Tet^sf;gB4H(Ye9n=
z%vjI>A&5W= <at> _uMTO+X3;U>GT%AAxglQPO1?g{w%{;U?UMJMaJ=$ <at> ~j=1#jT3<WlF)
z7*9C4N%Y <at> ~>(lT97BLqqXO(Ovt7hw14Xb4q%jf-Qb*!F+(9;!hyozS)Zd`9>QKu^Y

(Continue reading)

Group

gmane.comp.embedded.eldk.

Project Web Page

DENX Embedded Linux Development Kit discussion ()

Search Archive

Page

1 | 2 | 3 | 4 | 5 | 6

Articles in period: 54

May 2010

Language

Change language

Options

Current view: Threads only / Showing only 20 lines / Not hiding cited text.
Change to All messages, whole messages, or hide cited text.

Post a message
NNTP Newsgroup
Classic Gmane web interface
XML

XML

RSS Feed
List Information

About Gmane

Recent entries

ligcov missing? (20 Mar 2013)
Diamond blade Supply与您共享了相册。 (18 Mar 2013)
Removing X11 and GTK libraries from qte rootfs images in eldk 5.3 (11 Mar 2013)
X11 target image - missing libs (28 Feb 2013)
Issue about install packages to the rootfs (25 Feb 2013)
bitbake of custom ARM kernel to U-Boot uImage not installing properly? (23 Feb 2013)
Cross-compiling Linux kernel - unrecognized Opcode (21 Feb 2013)
bitbake: how to resolve dependency to ARM kernel-devicetree when build (19 Feb 2013)
bitbake of custom ARM kernel to U-Boot uImage not installing properly? (19 Feb 2013)
List Short Sales and Bank REO Foreclosures! (19 Feb 2013)
about eldk-5.3 installation (1 Feb 2013)
openssl support in ELDK-5.3 (30 Jan 2013)
openssl support in ELDK-5.3 (22 Jan 2013)
cannot find -lgcc (16 Jan 2013)
U-Boot configuration kernel + rootfs squashfs image in NAND Flash, cop (15 Jan 2013)
ELDK v5.1 maintenance update (9 Jan 2013)
sudarshan soma is still waiting for you to join Twitter... (22 Dec 2012)
ELDK v5.3 released (15 Dec 2012)
e500mc target architecture (14 Dec 2012)
sudarshan soma has invited you to join Twitter! (14 Dec 2012)
Python Include on ELDK (6 Dec 2012)

Archives

5	March 2013
17	February 2013
13	January 2013
12	December 2012
12	November 2012
3	October 2012
27	September 2012
11	August 2012
29	July 2012
15	June 2012
11	May 2012
11	April 2012
20	March 2012
8	February 2012
13	January 2012
18	December 2011
44	November 2011
39	October 2011
16	September 2011
20	August 2011
22	July 2011
27	June 2011
25	May 2011
11	April 2011
12	March 2011
13	February 2011
15	January 2011
31	December 2010
92	November 2010
38	October 2010
38	September 2010
33	August 2010
47	July 2010
30	June 2010
54	May 2010
117	April 2010
95	March 2010
17	February 2010
47	January 2010
24	December 2009
81	November 2009
61	October 2009
72	September 2009
47	August 2009
50	July 2009
55	June 2009
37	May 2009
47	April 2009
51	March 2009
55	February 2009
40	January 2009
9	December 2008
36	November 2008
60	October 2008
73	September 2008
43	August 2008
68	July 2008
26	June 2008
57	May 2008
39	April 2008
47	March 2008
26	February 2008
31	January 2008
20	December 2007
15	November 2007

Design

Zawodny | Right Menu | Left Menu

Your Own Design

Paste the URL of your CSS below. Download CSS template