Graham Triggs | 1 Jan 09:29 2008

Reminder: Call for Papers - DSUG <at> OR08

Hello,

As what is, at the time of writing, the first post of 2008, may I take 
this opportunity to wish everyone a happy and prosperous new year.

Of course, this is the time for resolutions, and if you're still 
thinking about what you can do this year, then might I suggest - 
submitting a paper to the DSpace User Group meeting in Southampton!!

With the deadline for submissions just under three weeks away on 21st of 
January, there is still time to think about something to present. Papers 
can be submitted now via the EasyChair site: 
http://www.easychair.org/conferences/?conf=OR08
(please use the '~ DSpace meeting' category).

Just to recall, we're looking for submissions up to 4 pages in length in 
either PDF or HTML format. For more details, see the guidelines for the 
general Open Repositories conference: http://or08.ecs.soton.ac.uk/cfp.html.

Thanks, and hope to see as many of you as possible in Southampton this 
April.

Graham
This email has been scanned by Postini.
For more information please visit http://www.postini.com

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
(Continue reading)

Mika Stenberg | 2 Jan 14:36 2008
Picon
Picon

Dspace 1.5 alpha fresh_install

How can I do fresh_install in Dspace 1.5-alpha. When running "mvn 
install" the db I created remains empty and I get "internal system 
error" on web ui?

Thanks,
-Mika

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
Claudia Jürgen | 2 Jan 14:44 2008
Picon
Picon

Re: Dspace 1.5 alpha fresh_install

Hi Mika,

a Happy New Year to you and the rest of the DSpace community.

You first run
mvn package
or
mvn mvn -Ddb.name=[postgres|oracle] package
from the download directory

and then run ant fresh_install from the target directory

see http://wiki.dspace.org/index.php/Building_DSpace_From_Source

hope that helps

Claudia

Mika Stenberg schrieb:
> How can I do fresh_install in Dspace 1.5-alpha. When running "mvn 
> install" the db I created remains empty and I get "internal system 
> error" on web ui?
> 
> Thanks,
> -Mika
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2005.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
(Continue reading)

Mark Diggory | 2 Jan 16:13 2008
Picon

Re: Dspace 1.5 alpha fresh_install

I would recommend checking out the current 1_5_x svn branch over  
using the alpha, we need to cut a beta soon, too many fixes or  
changes to the build system have occurred since the alpha.

-Mark

On Jan 2, 2008, at 5:44 AM, Claudia Jürgen wrote:

> Hi Mika,
>
> a Happy New Year to you and the rest of the DSpace community.
>
> You first run
> mvn package
> or
> mvn mvn -Ddb.name=[postgres|oracle] package
> from the download directory
>
> and then run ant fresh_install from the target directory
>
> see http://wiki.dspace.org/index.php/Building_DSpace_From_Source
>
> hope that helps
>
> Claudia
>
>
>
>
>
(Continue reading)

Mika Stenberg | 2 Jan 16:30 2008
Picon
Picon

Re: Dspace 1.5 alpha fresh_install

I tried 1_5_x branch, but it gives me error when running "ant 
fresh_install".

setup_database:
      [java] 2008-01-02 17:10:13,969 INFO 
org.dspace.core.ConfigurationManager  <at>  Loading system provided config 
property (-Ddspace.configuration): config/dspace.cfg
      [java] 2008-01-02 17:10:13,975 WARN 
org.dspace.core.ConfigurationManager  <at>  Interpolation failed in value of 
property "db.driver", there is no property named "default.db.driver"
      [java] 2008-01-02 17:10:13,979 INFO 
org.dspace.core.ConfigurationManager  <at>  Using default log4j provided log 
configuration,if uninitended, check your dspace.cfg for (log.init.config)
      [java] 2008-01-02 17:10:13,979 INFO 
org.dspace.storage.rdbms.InitializeDatabase  <at>  Initializing Database
      [java] 2008-01-02 17:10:13,996 WARN 
org.dspace.storage.rdbms.DatabaseManager  <at>  Exception initializing DB pool
      [java] java.lang.ClassNotFoundException:
      [java]     at java.lang.Class.forName0(Native Method)
      [java]     at java.lang.Class.forName(Class.java:164)
      [java]     at 
org.dspace.storage.rdbms.DatabaseManager.initialize(DatabaseManager.java:1419)
      [java]     at 
org.dspace.storage.rdbms.DatabaseManager.getConnection(DatabaseManager.java:512)
      [java]     at 
org.dspace.storage.rdbms.DatabaseManager.loadSql(DatabaseManager.java:859)
      [java]     at 
org.dspace.storage.rdbms.InitializeDatabase.main(InitializeDatabase.java:100)
      [java] 2008-01-02 17:10:13,999 FATAL 
org.dspace.storage.rdbms.InitializeDatabase  <at>  Caught exception:
(Continue reading)

Nigel Pegus | 2 Jan 17:17 2008

Handle Server fails to connect on dspace 1.4.1

Hi

Hello,

I have confirmed that ports 2641 and 8000 had been opened.. Telnet is
off on my Linux system but I can connect to the system using ssh and a
program called putty. I'm assuming the ports are therefore not an issue.
Tried running the handle update prefix script also, even though the
prefix was already correct and we hadn't made any entries prior to
setting up handle server(I had edited the config file in advance with
our pre existing prefix from our test server).

Any more insight will be greatly appreciated

Thanks for your input

Nigel

-----Original Message-----
From: Graham Triggs [mailto:graham@...] 
Sent: Monday, December 24, 2007 1:16 PM
To: Nigel Pegus
Cc: dspace-tech@...
Subject: Re: [Dspace-tech] Handle Server fails to connect on dspace
1.4.1

Hi,

Can you telnet to that machine / ports - both from the machine itself, 
from the wider network, and from the even wider internet?
(Continue reading)

Claudia Jürgen | 2 Jan 17:30 2008
Picon
Picon

Re: Handle Server fails to connect on dspace 1.4.1

Hi Nigel,

first a Happy New Year.

So you edited dspace.cfg to include the handle prefix and then ran 
dspace]/bin/make-handle-config and started the handle server with 
[dspace]/bin/start-handle-server.

Did you register the sitebndl.zip with 
http://hdl.handle.net/4263537/5014 after you ran make-handle-config?

Claudia

Nigel Pegus schrieb:
> Hi
> 
> Hello,
> 
> I have confirmed that ports 2641 and 8000 had been opened.. Telnet is
> off on my Linux system but I can connect to the system using ssh and a
> program called putty. I'm assuming the ports are therefore not an issue.
> Tried running the handle update prefix script also, even though the
> prefix was already correct and we hadn't made any entries prior to
> setting up handle server(I had edited the config file in advance with
> our pre existing prefix from our test server).
> 
> Any more insight will be greatly appreciated
> 
> Thanks for your input
> 
(Continue reading)

Mark Diggory | 2 Jan 18:10 2008
Picon

Re: Dspace 1.5 alpha fresh_install

Mika,

That looks like there was not an filtering of the db properties that  
get added to the dspace.cfg during the mvn build process.

just to verify, you ran just 'mvn clean package' prior to the ant build?

-Mark

On Jan 2, 2008, at 7:30 AM, Mika Stenberg wrote:

> I tried 1_5_x branch, but it gives me error when running "ant  
> fresh_install".
>
> setup_database:
>      [java] 2008-01-02 17:10:13,969 INFO  
> org.dspace.core.ConfigurationManager  <at>  Loading system provided  
> config property (-Ddspace.configuration): config/dspace.cfg
>      [java] 2008-01-02 17:10:13,975 WARN  
> org.dspace.core.ConfigurationManager  <at>  Interpolation failed in  
> value of property "db.driver", there is no property named  
> "default.db.driver"
>      [java] 2008-01-02 17:10:13,979 INFO  
> org.dspace.core.ConfigurationManager  <at>  Using default log4j provided  
> log configuration,if uninitended, check your dspace.cfg for  
> (log.init.config)
>      [java] 2008-01-02 17:10:13,979 INFO  
> org.dspace.storage.rdbms.InitializeDatabase  <at>  Initializing Database
>      [java] 2008-01-02 17:10:13,996 WARN  
> org.dspace.storage.rdbms.DatabaseManager  <at>  Exception initializing  
(Continue reading)

Nigel Pegus | 2 Jan 19:06 2008

Re: Handle Server fails to connect on dspace 1.4.1

Hello and Happy New Yr to you too Claudia :)

I edited dspace.cfg but could not get make-handle-config to run so I ran command dspace/bin/dsrun
net.handle.server.SimpleSetup /dspace/handle-server which was listed in older instructions to
create the handle server config..that worked... then started server with command dspace/bin/dsrun
net.handle.server.Main /dspace/handle-server. I sent the new sitebndl to CNRI and they updated our
records. They are getting a "cannot connect error" but we have verified the ports 2641 and 8000 are open so
we are at somewhat of a standstill on options..

Thanks for your response,
Nigel

-----Original Message-----
From: Claudia Jürgen
[mailto:Claudia.Juergen@...] 
Sent: Wednesday, January 02, 2008 12:30 PM
To: Nigel Pegus
Cc: dspace-tech@...
Subject: Re: [Dspace-tech] Handle Server fails to connect on dspace 1.4.1

Hi Nigel,

first a Happy New Year.

So you edited dspace.cfg to include the handle prefix and then ran 
dspace]/bin/make-handle-config and started the handle server with 
[dspace]/bin/start-handle-server.

Did you register the sitebndl.zip with 
http://hdl.handle.net/4263537/5014 after you ran make-handle-config?
(Continue reading)

Maike Dulk | 2 Jan 19:59 2008
Picon
Picon

not displaying all three questions on "Submit: Describe this Item"

Hi

I've been looking into this for a some now and it does not become any
clearer.

It's this. When you submit an item, there are these Initial Questions
(initial-questions.jsp). There seem to be three of them.
I was wondering how it is determined whether they are displayed or not?
In initial-questions.jsp I can see that this depends on the return
values of the functions inputSet.isDefinedMultTitles(),
inputSet.isDefinedPubBefore() and SubmitServlet.isWorkflow(si) but
that does not really explain why one user in our Dspace installation
gets only the "The item consists of more than one file" question, and
the other (they are both Dspace admins) sees  "The item has more than
one title, e.g. a translated title" AND "The item consists of more
than one file" but NOT the third one. Incidentally, when we choose a
different collection all three questions do show up.

i cannot find any place in Dspace where this behaviour is set ...
i.e. like in a config file of sorts.

I could try and track this issue down through the java code, but just
in case that any of you have seen this behaviour before and could
offer me a shortcut, that could save me a lot of time ...

thanks in advance!

oh btw .. running Dspace 1.4.2

----------
(Continue reading)


Gmane