headers
Wolfgang Denk | 3 Dec 2001 12:00
Picon
Picon
Favicon

Test

Sorry, just a test - I haven't seen any message  for  3  days,  which
never happened before...

Wolfgang Denk

--

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd <at> denx.de
Why is an average signature file longer than an average Perl script??
Permalink | Reply | 0 comments |
headers
Wolfgang Denk | 3 Dec 2001 12:00
Picon
Picon
Favicon

[Ppcboot-users] Test

Sorry, just a test - I haven't seen any message  for  3  days,  which
never happened before...

Wolfgang Denk

--

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd <at> denx.de
Why is an average signature file longer than an average Perl script??
Permalink | Reply | 1 comment |
headers
OTAVIO ISAMU SUGENO | 3 Dec 2001 13:14
Picon

[Ppcboot-users] Running error after realocation code

Hi everybody,
 
can anyone explain me why after realocation code to RAM (relocate_code
function) I can not get running ppcboot anynmore. The assembler
instructions does not work or works wrong, for example in in_ram
fuction, the instruction li r0, __got2_entries <at> sectoff <at> l loads a wrong
value in R0 or mtctr does not load the value into ctr.
If I continue running from FLASH, the instructions work.
 
If anyone knows something about it, please.
 
Thanks
Otavio Sugeno
Permalink | Reply | 0 comments |
headers
OTAVIO ISAMU SUGENO OTAVIO | 3 Dec 2001 14:43
Picon

[Ppcboot-users] Running error after realocating code

Hi everybody,

can anyone explain me why after realocationg code to RAM
(relocate_code function) I do not get running ppcboot anymore. The
assembler instructions does not work or works wrong. For example in
in_ram function, the instructions li r0, __got2_entries <at> sectoff <at> l
loads a wrong value in RO or mtctr does not load the value into ctr.
If I continue running from FLASH, the instructions work. In this
prototype we are running in Little endian byte ordering due a error
design. Can be a problem?

If anyone knows somethign about it, please.
Permalink | Reply | 0 comments |
headers
Jerry Van Baren | 3 Dec 2001 15:23

Re: [Ppcboot-users] Test

Works in Michigan, USA. :-)

gvb

At 12:00 PM 12/3/2001 +0100, Wolfgang Denk wrote:
>Sorry, just a test - I haven't seen any message  for  3  days,  which
>never happened before...
>
>Wolfgang Denk
>
>--
>Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
>Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd <at> denx.de
>Why is an average signature file longer than an average Perl script??
>
>_______________________________________________
>Ppcboot-users mailing list
>Ppcboot-users <at> lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/ppcboot-users

**********************************************************************
This e-mail and any files transmitted with it are confidential and may
be legally privileged or otherwise exempt from disclosure under
applicable law. This e-mail and its files are intended solely for
the individual or entity to whom they are addressed and their content
is the property of Smiths Aerospace.  If you are not the intended
recipient, please do not read, copy, use or disclose this communication.
If you have received this e-mail in error please notify the e-mail 
administrator at postmaster <at> si.com and then delete this e-mail, its
files and any copies.
(Continue reading)

Permalink | Reply | 0 comments |
headers
Navin Boppuri | 3 Dec 2001 21:45

RE: [Ppcboot-users] Running error after realocating code

It looks like RAM initialization stuff to me. Look at the UPM RAM Words.
I would suggest turning off burst mode initially and try to get it
running. Do you have SDRAM or DRAM on ur board?

Navin.

-----Original Message-----
From: OTAVIO ISAMU SUGENO OTAVIO [mailto:otavio.sugeno <at> siemens.com.br]
Sent: Monday, December 03, 2001 7:43 AM
To: ppcboot-users <at> lists.sourceforge.net
Subject: [Ppcboot-users] Running error after realocating code

Hi everybody,

can anyone explain me why after realocationg code to RAM (relocate_code
function) I do not get running ppcboot anymore. The assembler
instructions does not work or works wrong. For example in in_ram
function, the instructions li r0, __got2_entries <at> sectoff <at> l loads a wrong
value in RO or mtctr does not load the value into ctr.
If I continue running from FLASH, the instructions work. 
In this prototype we are running in Little endian byte ordering due a
error design. Can be a problem?

If anyone knows somethign about it, please.

_______________________________________________
Ppcboot-users mailing list
Ppcboot-users <at> lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ppcboot-users
(Continue reading)

Permalink | Reply | 0 comments |
headers
Jerry Van Baren | 3 Dec 2001 22:38

Re: [Ppcboot-users] Test

Hmmm, I'm not sure.  I am on the linuxppc-embedded list too, and the two 
lists tend to merge together in my recollections.  I've been deleting email 
madly (I was out of the office last week) so I don't have much history 
left.  I see a bunch of linuxppc-embedded messages, but I don't see any 
ppcboot-users messages in the stuff I have left.  I do have some messages 
in the last three days...

Your message from Friday...

To: Alex Zeffertt <ajz <at> cambridgebroadband.com>
Cc: ppcboot-users <at> lists.sourceforge.net
Subject: Re: [Ppcboot-users] How do I boot linux using PCMCIA flash card as 
root FS
From: Wolfgang Denk <wd <at> denx.de>
Date: Fri, 30 Nov 2001 21:27:46 +0100
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit
Content-Length: 32118
X-UID: 29054

probably not a fair message, since it just came in...

Subject: RE: [Ppcboot-users] Running error after realocating code
MIME-Version: 1.0
Message-Id: <D3A72C5007329A4F991C0DD87202259F0969E0 <at> sekhmet.ad.newisys.com>
From: "Navin Boppuri" <navin.boppuri <at> newisys.com>
To: "OTAVIO ISAMU SUGENO OTAVIO" <otavio.sugeno <at> siemens.com.br>,
         <ppcboot-users <at> lists.sourceforge.net>
Sender: ppcboot-users-admin <at> lists.sourceforge.net
Errors-To: ppcboot-users-admin <at> lists.sourceforge.net
(Continue reading)

Permalink | Reply | 0 comments |
headers
Andrew Dixon | 4 Dec 2001 16:12

[Ppcboot-users] sbc8260

Hi All,

I'm trying to put ppcboot onto an sbc8260 from windriver.  I was
wondering if there's any documentation on that subject anywhere.  

I'm specifically trying to figure out where the best place to put the
ppcboot is.  It looks like most people are burning it into the ROM on
that board.  Is that a good assumption to start with?

Thanks,
Andy
Permalink | Reply | 2 comments |
headers
Wolfgang Denk | 4 Dec 2001 16:31
Picon
Picon
Favicon

Re: [Ppcboot-users] sbc8260

Dear Andrew,

in message <3C0CE7D2.2F408711 <at> seranoa.com> you wrote:
> 
> I'm trying to put ppcboot onto an sbc8260 from windriver.  I was
> wondering if there's any documentation on that subject anywhere.  

There is the README file for general configuration  issues,  and  the
SBC8260  config  file  (include/config_sbc8260.h)  for  board specific
things.

> I'm specifically trying to figure out where the best place to put the
> ppcboot is.  It looks like most people are burning it into the ROM on
> that board.  Is that a good assumption to start with?

The default configuration uses the 4 MB flash SIMM  as  boot  device,
and this is where you will put PPCBoot.

Works fine here, including Linux :-)

Wolfgang Denk

--

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd <at> denx.de
There's no sense in being precise  when  you  don't  even  know  what
you're talking about.                             -- John von Neumann
Permalink | Reply | 0 comments |
headers
Wolfgang Denk | 4 Dec 2001 16:31
Picon
Picon
Favicon

Re: [Ppcboot-users] sbc8260

Dear Andrew,

in message <3C0CE7D2.2F408711 <at> seranoa.com> you wrote:
> 
> I'm trying to put ppcboot onto an sbc8260 from windriver.  I was
> wondering if there's any documentation on that subject anywhere.  

There is the README file for general configuration  issues,  and  the
SBC8260  config  file  (include/config_sbc8260.h)  for  board specific
things.

> I'm specifically trying to figure out where the best place to put the
> ppcboot is.  It looks like most people are burning it into the ROM on
> that board.  Is that a good assumption to start with?

The default configuration uses the 4 MB flash SIMM  as  boot  device,
and this is where you will put PPCBoot.

Works fine here, including Linux :-)

Wolfgang Denk

--

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd <at> denx.de
There's no sense in being precise  when  you  don't  even  know  what
you're talking about.                             -- John von Neumann
Permalink | Reply | 0 comments |

Gmane